cylinder head

The complete offer in cylinder head

Cylinder head packing, steel sealing

Cylinder head packing is made of an special kind of sealing paper with dry graphite finish. The cylinder are sealed by single metal-rings for each one, which are fixed at the paper packing.
one piece will be needed

Wartburg311,312 and 313, 2-stroke, 3-cylinder, 1000ccm, 8 bolts
Wartburg-353, 2-stroke, 3-cylinder, 1000ccm, 8 bolts
Barkas-B1000,2-stroke, 3-cylinder, 1000ccm, 8 bolts
compession sealing: steel
high quality made in Germany

The tightening torque and the sequence of mounting of the cylinder head nuts you can find at Art.No.:6318

49,27 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3120

Cylinder head packing, copper sealing

Detail

Cylinder head packing is made of an special kind of sealing paper with dry graphite finish. The cylinder are sealed by single copper-metal-rings for each one, which are fixed at the paper packing.
one piece will be needed

Wartburg311,312 and 313, 2-stroke, 3-cylinder, 1000ccm, 8 bolts
Wartburg-353, 2-stroke, 3-cylinder, 1000ccm, 8 bolts
Barkas-B1000,2-stroke, 3-cylinder, 1000ccm, 8 bolts
compession sealing: copper
high quality made in Europe

The tightening torque and the sequence of mounting of the cylinder head nuts you can find at Art.No.:6318

68,70 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7986

Cylinder head nut

Detail

cylinder head nut fit to:

Wartburg-353, 2-stroke, 3-cylinder,1000ccm or 1200ccm, 8 or 12 bolts
Wartburg-3112-stroke, 3-cylinder,900 or 1000ccm, 8 or 12 bolts
Barkas-B1000,2-stroke, 3-cylinder,1000ccm, 8 bolts

The tightening torque and the sequence of mounting of the cylinder head nuts you can find at (Details)

1,88 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6318

Bolt for cylinder head

Detail

cylinder bols fit to:

Wartburg-353, 2-stroke, 3-cylinder,1000ccm or 1200ccm, 8 or 12 bolts
Wartburg-3112-stroke, 3-cylinder,900 or 1000ccm, 8 or 12 bolts
Barkas-B1000,2-stroke, 3-cylinder,1000ccm, 8 bolts
Framo 2-stroke, 3-cylinder 900ccm, 8 or 12 bolts

The tightening torque and the sequence of mounting of the cylinder head nuts you can find at (Details)

normaly 11,81 € now 8,88 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6931

Grooved ball bearing for Fan-shaft and water pump shaft

Detail

FAG grooved ball bearing for shaft of water pump and fan shaft
for Wartburg 353 and B1000 (2-stroke)

high quality made by FAG
size: 12 x 37 x 12
for the water pump shaft of the Wartburg 353 and Barkas B1000: two pieces are needed
for the Fan shaft Barkas one piece will be needed

9,44 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6298

Snap ring for grooved ball bearing

Detail

Circlip for grooved ball bearing 6301 for shaft of water pump Wartburg 353 and B1000 (2-stroke) without vintage limit.

Snap ring for bore
one piece will be needed

0,98 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6537

Fitted key 3 x 3,7

Detail

Woodruff key (3 x 3,7).
Can be used for additional fan-shaft Barkas B1000.
And olso for the connection between V-pully and Fan wheel water pump up to 5/85 or fan wheel water pump from 5/85 and (Water pump shaft 42cm up to 5/85 oder Water pump shaft from 6-85).

B1000: three pieces needed for complete fan-shaft
B1000 / W353: two pieces needed for shaft of waterpump

0,88 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6304

Bearing ring for water pump shaft

Detail

Bearing washer for the water pump inside the cylinder head of the Warturg 353 and Barkas B1000.
Can be used for all types of water pumps without vintage limit.

made in Germany
delivery as an single part
metal, galvaniced
one pieces needed

3,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8204

Sealing for water pump

Detail

Speacial seling system for the water pump inside the cylinder head of the Warturg 353 and Barkas B1000.
Can be used for all types of water pumps without vintage limit.

made in Europe
inclusive rubber seal
for Wartburg 353 up to 5-85 will be two pieces needed
for Wartburg 353 from to 5-85 and Barkas B1000 will be one piece needed

32,03 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6770

V-belt pulley, plastic W353

Detail

V-belt pulley to drive the shaft of water pump inside the cylinder head of Wartburg 353.
Can be used for all kind of W353 engines like types with front radiator and elektrical fan and middle radiator with mechanical fan.
It can be used at single types of Barkas B1000 it the car was modificated to an electrical radiator fan.

high quality EU production
one piece will be needed

23,44 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6584

Spare parts for water pump up to vintage May 1985

Water pump shaft 42cm up to 5/85

Detail

Transmission shaft for cooling pump at the cylinder head of the Wartburg 353 Limousine, Tourist or Trabs (up to vintage Mai 1985) with three cylinder 2-stroke engine

material: steel
with knurling for fan
Original spare part
length total: 42cm
one piece will be needed

96,10 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7382

Spare kit for water pump up to 5/85

Detail

fit to Wartburg 353 (up to vintage Mai 1985) with three cylinder 2-stroke engine
complete set consist of:

1x fan wheel
2x membran gasket compl.
2x cover disc for ball bearings
1x gasket for ball bearing (rubber), side of belt pulley
1x distance bush (inner bush)
1x O-ring
one set will be needed

290,72 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 3137

Spare kit for water pump up to 5/85, low budget Detail
81,33 €inclusive VAT, plus shipping costs temporary not available Art.No. 8365

Fan wheel water pump up to 5/85

Detail

The waterpump wheel fit to Wartburg 353 (up to vintage Mai 1985) with three cylinder 2-stroke engine

1x fan wheel with 2xmetal ring for membran sealing
made in Europe

64,20 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7344

Spare parts for water pump from vintage June 1985

Water pump shaft from 6-85

Detail

Transmission shaft for cooling pump at the cylinder head of the Wartburg 353 Limousine, Tourist or Trabs (up to vintage June 1985) with three cylinder 2-stroke engine.
Wartburg type with radiator in front of the engine an elektrical cooling fan.

material: steel
Original spare part
length total: 38cm
one piece will be needed
delivery without mounting parts

68,00 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7383

Spare kit for water pump from 5/85

Detail

fit to Wartburg 353 (from vintage Mai 1985) and all Barkas B1000 (3 cylinder 2-stroke engine)
complete set consist of:

1x fan wheel
1x membran gasket compl.
2x cover disc for ball bearings
1x gasket for ball bearing (rubber), side of belt pulley
1x distance bush (inner bush)
1x O-ring
one set will be needed

250,10 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 3138

Spare kit for water pump from 5/85, low budget

Detail

Repairset for the coolung pump as no name product.
fit to Wartburg 353 (from vintage Mai 1985) and all Barkas B1000 (3 cylinder 2-stroke engine)
complete set consist of:

1x fan wheel
1x membran gasket compl.
2x ball bearing
1x distance bush (inner bush)
one set will be needed
no name, producer unknown

68,20 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 8359

fan wheel water pump from 5/85

Detail

Waterpump wheel fit to Wartburg 353 (from vintage Mai 1985) and all Barkas B1000 (3 cylinder 2-stroke engine)

1x fan wheel with 2xmetal ring for membran sealing
made in Europe

85,29 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7345

Bolt for dyadic pump housing

Detail

Hexagon bolt for the water pump case fit to Wartburg 353 and B1000 two stroke engines with the splitted water pump housing.

delivery inclusive washer
six pieces will be needed

0,92 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7978

Bolt for pump housing

Detail

Hexagon bolt for the water pump case fit to all Wartburg 353 and B1000 two stroke engine

delivery inclusive washer
six pieces will be needed

0,92 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6859

gasket ring of sensor for temperature

Detail

Aluminium ring for the temperature sensor mounted in cylinder head of 2-stroke engine of Wartburg 353 and barkas B1000.

outer-diameter: 20 mm
inner-diamter: 14 mm
thickness: 1,5 mm

Original-parts-no.: 99 00109 450

0,18 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6565

sensor for temperature Detail Transmitter for temperature indication thread: M14 x 1,5 width across flats: 19mm
Original-parts-no.: 91 05000 094	23,95 €inclusive VAT, plus shipping costs temporary not available Art.No. 6554

Thermostat

Detail

Fit to all Wartburg 353 and Barkas with 3 cylinder two stroke engine.

incl. sealing ring
Thermostat opens by 82°C
one piece will be needed

14,83 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3135

Sealing ring for thermostat Detail Sealing ring made of black rubber fit thermostat of all Wartburg 353 and Barkas B1000 with 3 cylinder two stroke engine. {[mad in Germany][one piece will be needed]}
3,85 €inclusive VAT, plus shipping costs temporary not available Art.No. 7007

Bolt for thermostat case

Detail

Hexagon bolt for the Thermostat manifold fit to all Wartburg 353 and B1000 two stroke engine

delivery inclusive washer
three pieces will be needed

0,92 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6858

Seal for thermostat case

Detail

Thermostatseal fit to all Wartburg 353 and B1000 two stroke engine

material: seal-paper
one piece will be needed

3,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3136

Seal for water pump, labyrinth

Detail

Some Wartburg and B1000 engines have an splitted pump case.
This Waterpump seal fit to the outer cap, the labyrinth housing.
For the total sealing you need additional still the normal water pump seal

material: seal-paper
one piece will be needed

6,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7253

Seal for water pump

Detail

Waterpump seal to mounting between cylinder head and water pump housing ( fit to
both types single and splitted water pump casing).
Used at all Wartburg 353 and B1000 two stroke engine and integrated water pump at the cylinder head (without vintage limit).

material: pressed sealing-paper
one piece will be needed

4,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3139

The complete offer in cylinder head

* All prices inclusive VAT and plus shipping costs.