This site in german: Wartburg 353 > Ersatzteile > Elektrik 
You are here: > Wartburg 353> Spare parts> Electrical system

Wartburg 353 spare parts

Category Wartburg 353 spare parts has the subcategory

The product category Wartburg 353 > Spare parts > Electrical system is spread over 7 sites:

AC-dynamo and spare parts

Roller bearing 6203 ZZ

Single row roller bearing 6203, ZZ, 17x40x12.
High Qualit made by FAG.
Fit to Dynamo 12V with cut out relay (electronic) for Wartburg 353 and Barkas B1000, LDM-part.no.:3150 and Dynamo 12V with cut out relay for Wartburg 353 und Barkas B1000, LDM-Art.Nr.:7361 rotor shaft front side (end shield)
  • ZZ- synonym for bearing cover, both side
  • dimensions: d=17mm, D=40mm, widness:12mm
  • bearing play CN(CO)-normale bearing play
  • one piece will be needed
  • made by FAG
9,79 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8256

Pessure spring carbon brush

Coil spring for the carbon brushes at the rotary current generator.
Original spare part (NOS)
For each generator two pieces will be needed.
Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-040
1,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 760

Bearing cover rotary current generator

Metal cover for the rear ball bearing (rotor shaft rear 6303ZZ) of the rotary current generator to the collector ring.
Original spare part (NOS)
  • metal, galvaniced
  • For each generator one piece will be needed
  • Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-030
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 772

Graphite collector ring rotary current generator

Collector ring for the generator rotor.
Inclusive metal plates for mounting the rotor windings
Original spare part (NOS)
  • For each generator one piece will be needed
  • Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-032/1
96,18 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7599

Bolt for regulator

Mounting bolt for regulator and cutout relay.
Original spare part (NOS)
  • threed: M5
  • length: 49mm
  • delivery inclusive nut SW8
  • For each generator tow pieces will be needed
  • Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.401-000
2,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7600

Dust cap for ball bearing trunnion bearing rear

Metal cap for protection of the grooved ball bearing at the trunnion bearing A-S rear side agianst dust and dirt.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • outside diameter: 34mm
  • inside diameter: 15mm
  • one piece will be needed
original spare part number: 8001.4-200:6
1,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7804

Dust cap for ball bearing trunnion bearing A-S

Metal cap for protection the grooved ball bearing at the trunnion bearing A-S front side agianst dust and dirt.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • outside diameter: 29mm
  • inside diameter: 15mm
  • one piece will be needed
original spare part number: 8001.4-200:3
1,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7803

Ball bearing for Dynamo ( old type )

Grooved ball bearing to retain the dynamo armature at teh case.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part, delivery without mounting bits
  • high quality made by FAG
  • two pieces will be needed
8,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7796

Contact rail for dynamo older type

Middle contact for connection the wire D- at the electrical box.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • one piece will be needed
original spare part number: 8001.5-101
6,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7809
The product category Wartburg 353 > Spare parts > Electrical system is spread over 7 sites:
1234567
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas