Home
Impressum
Terms of business
Basket
You are here: >
Wartburg 353
>
Spare parts
>
Electrical system
Shop
IFA engine
pistons
IFA-vehicles
Framo
P70 / F8 / F9
W50/L60
Trabant 500/600
Wartburg 311 / 312 / 313
Multicar M22
Multicar M24
Multicar M25
Multicar M26
Multicar M27
Trabant 601
Spare parts
Tuning parts
complete cars
Trabant 1.1
Spare parts
Tuning parts
Wartburg 353
Spare parts
Exhaust system
Brakes
Front brake
brake line
Rear brake
Electrical system
Lighting
fuel system
Engine
Piston
cooling system
clutch
Ignition system
cylinder head
gearbox
Front axle
Steering unit
rear axle
car body parts
Panes & rubber sections
Accessories
valve caps
Floor mat
Tuning parts
Revolution counter
Electrical system
Suspension
Roll bar
roll cage
carburettor
valve caps
Wartburg 1.3
Spare parts
Tuning parts
Barkas B 1000
Spare parts
Ball joints, accessories
Boots for ball joints
Skoda
Trailer
Bastei-camper
Camptourist / Klappfix
Intercamp / Oase
Qek-camper
Special made
Bulbs
12Volt
6Volt
24 Volt
connecting wire and accessory
bicolored car wires
Single colour wire
manufactured wires
workshop requirement
hose clips
tools
Lubricants
Mounting parts
fuel tank coating
Protection equipment
Varnish and paint
Accessory
Corrosion protection
adhesive bonded joint
Bowden cable
Carburetor jets
care products
Antifriction bearing
Grooved ball bearing
Cylindrical roller bearing
oils
Special items
Service
privacy policy
Terms of business
Used Oil disposal
Taking back of batterys
Downloads
shipping costs
Favorite links
Impressum
Produktindex
Search
Basket
Wartburg 353 spare parts
Category Wartburg 353 spare parts has the subcategory
Lighting
The complete offer in Wartburg 353 spare parts
cable for positive pole of car battery W1,3
Detail
connection cable between positive pole of car battery and the terminal screw of starter motor.
Fit to all body types of Wartburg 353 like Limousine, Tourist and Trans.
Made of high quality coper wire with additional tin-plated single strands. The double isolation is coated at the outside with an flexible and resistant rubber.
pre-finished
one cable tail with battery pole terminal
one cable tail with 8mm cable shoe for terminal screw of solenoid switch (mounted on starter)
thick and robust isolation (outer diameter: 13,3mm)
new made in Germany
50,81 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7426
Ground cable for car battery W353
Detail
Connection cable between negative pole of car battery and the mounting screw of gearbox and engine (earth-connection, ground).
Fit to all body types of Wartburg 353 like Limousine, Tourist and Trans.
Made of high quality coper wire with additional tin-plated single strands. The double isolation is coated at the outside with an flexible and resistant rubber.
length: mm
pre-finished
one cable tail with battery pole terminal
one cable tail with 8mm cable shoe
thick and robust isolation (outer diameter: 13,3mm
new made in Germany
copper cable
41,95 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8267
Fuse box sixfold
Detail
Fuse box inclusive 6 fuses. Wire connection with mounting screws.
Type with 6 single places for fuses.
Cover mede of clear glass plastic.
Useable for Ifa cars and many Old- and Youngtimers.
19,54 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 8035
Fuse box eigth fold
Detail
Fuse box inclusive 8 fuses. Wire connection with mounting screws.
Type with 8 single places for fuses.
Cover mede of clear glass plastic.
Useable for Ifa cars and many Old- and Youngtimers.
18,24 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 8036
Flasher unit 12V, without trailer
Detail
Electronic control unit 12V for flasher lights (direction indicator)
Useable for vehicles without trailer flashers.
original spare part number: 8586.1
37,39 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 68
Flasher unit 6V
Detail
Electronic control unit for flasher lights (direction indicator) for 6V systems.
Not for trailer use.
43,01 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8200
Flasher unit 12V (for trailer useing) 5-pins, no name
Detail
Electronical flasher relais with additional terminal C2 for active light of trailer flasher.
Version with 5 terminals.
New produced spare part.
12V 2+1(6)x 21W + (2)x 0...4W
Replacement for the original spare part number: 8586.6/0002
33,39 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 69
Starter and spare parts
Starter 12V, complete (W353/B1000)
Detail
Starter inclusive magnet for starter fit to Wartburg 353 and Barkas B1000 (2-stroke).
Spare part is overhauled in Germany. High quality. Exchange part!
voltage: 12V
output: 0,58KW
pinion teeth: 9
Overhaul part, please send the clutch and clutch disc in advance to our company
Overhaul part, please send your strater to our company in advance
275,11 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 3155
Freewheel for starter 12V (W353/B1000)
Detail
Starter freewheel complete premounted inclusive pinion (9 teeth).
Fit to Wartburg 353 and Barkas B1000 (2-stroke).
This part is made in Europe. High quality, best replacement for the genuine spare part.
one piece will be needed
Original spare part number: 820.11-230
52,43 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7643
mounting set for starter 12V
Detail
mounting set for starter consist of:
2x screw M12 x 100
2x washer
2x nut M12
5,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6386
Magnet, complete for starter 12V
Detail
Magnet switch for the starter motor of the Barkas B1000 und Wartburg 353.
1x threat connection M8 for ring terminal, battery positive terminal.
1x connection for switch wire, blade terminal 6,8mm (standard)
voltage 12V
spare part is made in EU
one piece will be needed
58,79 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6066
Magnet, complete for starter 6V
Detail
Magnet switch for all starter types:
Trabant 500,600,601, Wartburg 311,312,313 and Barkas B1000 with 6V system.
This is an NOS spare part.
Original spare part number: 8201.6/3-400/1
65,23 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 780
1+1
Brush for starter
Detail
Spare-brushes of the starter engine to solder on at the coil set.
Can be used for all kind of starters 6V and 12V left- and right turning (without Trabant 1.1, Wartburg 1.3 and Baraks B1000-1)
mounting place: brushholder bas plate
size: 16X19x7
delivery as an single part
for each starter two pieces will needed
original spare part number: 8202.11-220:10
8,24 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 785
Bolt for starter
Detail
Bolt of the Bearing case of the starter engine.
Connection bolt will be mounted at the beraing case threadholes and on the other side it will hold the rear case cover.
Delivery as a single part without nuts an washers.
Can be used for all kind of starters 6V and 12V left- and right turning (without Trabant 1.1, Wartburg 1.3 and Barkas B1000-1)
original spare part
surface: galvaniced
total length: 16.5 cm
delivery as an single part
for each starter two pieces will needed
original spare part number: 8202.1-000:4/1
2,93 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7658
Spring for brush starter
Detail
Pressure spring for the brushes of the starter engine.
This spring will push the brush at the collector ring from the rotor shaft.
Can be used for all kind of starters 6V and 12V left- and right turning (without Trabant 1.1, Wartburg 1.3 and Barkas B1000-1)
mounting place: brushholder bas plate
original spare part
delivery as an single part
for each starter two pieces will needed
original spare part number: 8202.11-220.6
1,55 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7629
Protection cap for starter lite ( plastic )
Detail
Sealing cap to protect the starter wire (plus) against dust and moisture.
Fit to the vehicles: P70, Trabant, Wartburg, Multicar, Framo and Barkas.
made in Germany
one piece will be needed
6,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 786
AC-dynamo and spare parts
Dynamo inclusive regulator, rotary current AC 12V
Detail
Rotary current generator complete overhauled spare part.
Fit to Wartburg 353 and Barkas B1000.
Scope of delivery inclusive mounted voltage regulator
For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
308,81 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 3150
Dynamo without regulator, rotary current AC 12V
Detail
Rotary current generator complete overhauled spare part.
Fit to Wartburg 353 and Barkas B1000.
Scope of delivery without 12V voltage regulator
For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
289,17 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7361
Regulator and cutout relay for AC 12V Dynamo
Detail
The voltage regulator is direct mounted at the dynamo. Fit to many IFA dynamos with rotary current. for example:
dynamo 12V Trabant
dynamo 12V Trabant 1.1, Wartburg 1,3 and Barkas B1000-1
dynamo 12V Wartburg 353 and Barkas B1000
original spare part
one piece will be needed
DLR TGL33604
47,93 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 775
Relais 12V 50A (changeover contact)
Detail
Additional relais for operating supply 12V DC with changeover contact. The maximum current 30 ampere.
5 x blade terminal connection pins (6 x 0,8mm
1x changeover contact (can be used as changeover-, make- or break contact
Max. continuous current with 12V DC: 40A (make contact no.87)/ 30A (break contact no.87a)
plastic case
dimensions: 28 x 28 x 25 mm (without mounting lug)
8,92 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 6890
Brush for Dynamo AC
Detail
Spare brush fit to
AC Dynamo 12V Trabant 601
and
dynamo 12V Wartburg 353 and Barkas B1000
original spare part
price for each one
two pieces will be needed
size: 15,5mm x 10mm x 5mm
wire: 30mm
original spare part number: 8042. 1-041/1
5,63 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 770
Diode base plate for Dynamo AC
Detail
Spare base plate complete pre installed with excitation diodes and plus diodes.
Best use for exchanging the complete componet.
Delivery without mounting parts.
Fit to
dynamo 12V Wartburg 353 and Barkas B1000
and
dynamo 12V Wartburg 1.3, Trabant 1.1 and Barkas B1000-1
.
original spare part
one base plate will be needed
original spare part number: 8042.4-410/1
48,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7602
Roller bearing 6003 ZZ
Detail
Single row roller bearing 6003, ZZ, 17x35x10.
Made by FAG.
Fit to
AC generator 12V Trabant, Wartburg und Barkas
rotor shaft front side
ZZ- synonym for bearing cover, both side
bearing play CN(CO)-normale bearing play
one piece will be needed
made by FAG
8,57 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6330
Roller bearing 6203 ZZ
Detail
Single row roller bearing 6203, ZZ, 17x40x12.
High Qualit made by FAG.
Fit to
Dynamo 12V with cut out relay (electronic) for Wartburg 353 and Barkas B1000, LDM-part.no.:3150
and
Dynamo 12V with cut out relay for Wartburg 353 und Barkas B1000, LDM-Art.Nr.:7361
rotor shaft front side (end shield)
ZZ- synonym for bearing cover, both side
dimensions: d=17mm, D=40mm, widness:12mm
bearing play CN(CO)-normale bearing play
one piece will be needed
made by FAG
9,79 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8256
Pessure spring carbon brush
Detail
Coil spring for the carbon brushes at the rotary current generator.
Original spare part (NOS)
For each generator two pieces will be needed.
Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-040
1,55 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 760
Bearing cover rotary current generator
Detail
Metal cover for the rear ball bearing (rotor shaft rear 6303ZZ) of the rotary current generator to the collector ring.
Original spare part (NOS)
metal, galvaniced
For each generator one piece will be needed
Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-030
3,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 772
Graphite collector ring rotary current generator
Detail
Collector ring for the generator rotor.
Inclusive metal plates for mounting the rotor windings
Original spare part (NOS)
For each generator one piece will be needed
Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-032/1
96,18 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7599
Bolt for regulator
Detail
Mounting bolt for regulator and cutout relay.
Original spare part (NOS)
threed: M5
length: 49mm
delivery inclusive nut SW8
For each generator tow pieces will be needed
Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.401-000
2,45 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7600
Dust cap for ball bearing trunnion bearing rear
Detail
Metal cap for protection of the grooved ball bearing at the trunnion bearing A-S rear side agianst dust and dirt.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
Single spare part
original spare part
outside diameter: 34mm
inside diameter: 15mm
one piece will be needed
original spare part number: 8001.4-200:6
1,80 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7804
Dust cap for ball bearing trunnion bearing A-S
Detail
Metal cap for protection the grooved ball bearing at the trunnion bearing A-S front side agianst dust and dirt.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
Single spare part
original spare part
outside diameter: 29mm
inside diameter: 15mm
one piece will be needed
original spare part number: 8001.4-200:3
1,80 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7803
Ball bearing for Dynamo ( old type )
Detail
Grooved ball bearing to retain the dynamo armature at teh case.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
Single spare part, delivery without mounting bits
high quality made by FAG
two pieces will be needed
8,51 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7796
Contact rail for dynamo older type
Detail
Middle contact for connection the wire D- at the electrical box.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
Single spare part
original spare part
one piece will be needed
original spare part number: 8001.5-101
6,50 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7809
Trunnion bearing A-S dynamo older type
Detail
Rear side trunnion bearing complete with pre-installed brushes and pressure springs. Best use for overhauling.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
Single spare part without mounting equipment and bearing
original spare part
one piece will be needed
original spare part number: 8001.5-300
62,20 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7807
Pin bolt for dynamo older type
Detail
Special pin for mounting the front and rear trunnion bearing A-S at the dynamo base case.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
Single spare part
original spare part
thread: M5
length: 170mm
two pieces will be needed
original spare part number: 8001.4-000:4
2,25 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7805
Contact box for dynamo older type
Detail
Wire connection terminal box for mounting at the dynamo case.
Delivery inclusive contact for wires DF and D+. Inclusive clamp bolt for connection the brushes.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
Single spare part
original spare part
one piece will be needed
original spare part number: 8001.5-130
28,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7811
Retainer for Ball bearing Trunnion bearing A-S
Detail
Mounting holder for the grooved ball bearing at the trunnion bearing A-S front side.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
Single spare part, delivery mounting screws
original spare part
one piece will be needed
original spare part number: 8001.4-200:2
3,20 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7802
Wire clip for contact box
Detail
U-bolt to mount the cover on top of the connection terminal box
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
Single spare part
original spare part
one piece will be needed
original spare part number: 8001.4/1-000:1
2,50 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7813
Brush spring for dynamo older type
Detail
Spring for the brushes to connect the rotor.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
Single spare part
original spare part
two pieces will be needed
original spare part number: 8001.4/1-300:7/2
5,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7808
Retainer for contact rail
Detail
Tinned metal pice to solder the wire of the field coil at the middle contact (D-).
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
Single spare part
original spare part
one piece will be needed
original spare part number: 8001.4/1-100:1(5)
0,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7812
switch unit for ignition look switch
Detail
Switch insert for ignition look.
Electrical part of ignition look switch wich is mounted at the backside.
Latest version with six blad terminals.
Best quality form the original manufacture made in Germany.
Fit to Wartburg 353, 1.3, Barkas B1000 and B1000-1
original spaer part number: 8630.10
19,72 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7719
Speedometer with trip meter
Detail
Round speedometer for the cars Wartburg 1.3, Wartburg 353, Trabant 1.1, Barkas B1000 and B100-1.
type:
Speedscale up to 150km/h
inclusive trip meter
power 12V
delivery without bulbs and without bulb retainer
front rim : black
mounting diameter: 100mm
genuine spare part
Zak No: 3.0230/47
81,64 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7092
Rubber membrane plug for holes with diameter of 15mm
Detail
Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
fit to hole diameter of 15 mm
inner diameter of membrane (max. usable diameter): 9 mm
outer diameter (total): 20 mm
0,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6796
Rubber membrane plug for holes with diameter of 18,5mm
Detail
Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
fit to hole diameter of 18,5 mm (0,728")
inner diameter of membrane (max. usable diameter): 11 mm (0,433")
outer diameter (total): 23 mm (0,906")
0,97 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6895
Rubber membrane plug for holes with diameter of 25mm
Detail
Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
fit to hole diameter of 25 mm
inner diameter of membrane (max. usable diameter): 18,5 mm
outer diameter (total): 30,5 mm
thickness: 7 mm
1,27 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7625
Rubber membrane plug for holes with diameter of 20,5mm
Detail
Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
fit to hole diameter of 20,5 mm
inner diameter of membrane (max. usable diameter): 13,5 mm
outer diameter (total): 25 mm
thickness: 7 mm
1,05 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6797
Rubber membrane plug for holes with diameter of 28mm
Detail
Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
fit to hole diameter of 28 mm
inner diameter of membrane (max. usable diameter): 21 mm
outer diameter (total): 35 mm
1,57 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6798
Rubber membrane plug for holes with diameter of 32mm
Detail
Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
fit to hole diameter of 32 mm
inner diameter of membrane (max. usable diameter): 25 mm
outer diameter (total): 39 mm
thicknes of the menbrane: 1mm
total thickness: 9mm
2,23 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7613
Rubber membrane plug for holes with diameter of 37mm
Detail
Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
fit to hole diameter of 37 mm
inner diameter of membrane (max. usable diameter): 29 mm
outer diameter (total): 44 mm
1,75 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6799
Rubber membrane plug for holes with diameter of 47mm
Detail
Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
fit to hole diameter of 47 mm
inner diameter of membrane (max. usable diameter): 36 mm
outer diameter (total): 54 mm
thicknes of the menbrane: 1mm
total thickness: 10mm
2,98 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6800
Fuse box SDB/8
Detail
Retainer for the fuses (8 pieces) as terminal block with clamp connection for the wires.
Fit to Trabant 601 Limousine, Universal and Kuebel.
original spare part
delivery complete cover
delivery without fuses
origial spare part no: 8811.11
36,44 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7475
Wiper motor 12V
Detail
Wiper motor as universal unit with 12V sytem. This Repro part can be used for the car types: Multicar M22, M24, M25, Wartburg 353 and 1,3, Baraks B1000 and B1000-1, Trabant 601 (from vintage 88) and Trabant 1,1.
Inexpensive option to the original spare part.
The base plate can be turend to modificate the wiper motor for your car type.
The wire connection have to be done byself.
delivery as an single part
without wires or wire plugs
one piece will be needed
12V system
89,73 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8357
Carrier for carbon brush
Detail
Retainer for the carbon brushes at the rotary current generator.
New produced spare part.
For each generator one piece will be needed.
Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1, Multicar M25
17,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8495
Flasher unit 12V (for trailer useing) 5-pins, high quality
Detail
Electronical flasher relais with additional terminal C2 for active light of trailer flasher.
High quality trade mark.
Version with 5 terminals.
New produced spare part.
12V 2+1(6)x 21W + (2)x 0...4W
Replacement for the original spare part number: 8586.6/0002
48,11 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8501
Set of cable grommet seal
Detail
One set of cable grommet seals with different sizes.
Contens:
40 pieces body hole: 6mm / wire bore: 2mm
40 pieces body hole: 7,5mm / wire bore: 5mm
40 pieces body hole: 9mm / wire bore: 6mm
25 pieces body hole: 11mm / wire bore: 8,5mm
20 pieces body hole: 12mm / wire bore: 10mm
5 pieces body hole: 15mm / wire bore: 12mm
5 pieces body hole : 20,5mm / wire bore: 14,5mm
5 pieces body hole: 23,5mm / wire bore: 17,5mm
15,86 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8608
The complete offer in Wartburg 353 spare parts
* All prices inclusive VAT and plus
shipping costs
.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas