This site in german: Wartburg 353 > Ersatzteile > Bremsen > Bremse hinten 
You are here: > Wartburg 353> Spare parts> Brakes> Rear brake
Navigation

Spare parts for rear wheel brake Wartburg 353

The product category Wartburg 353 > Spare parts > Brakes > Rear brake is spread over 6 sites:

123456
Show all products

Rivet bolt for hand-brake lever

Rivet bolt for mounting the hand brake lever at the rear brake shoe (short lining).
Fit to Tarabant 601 and Trabant 1,1 rear axle, Wartburg 311,312,353,1.3 and Anhänger wie Qek, Intercamp, Oase, Camptorist, Klappfix.
  • material: steel, galvaniced
  • one piece for each rear brake
1,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 183

Holder for brake shoe, complete set

Retainer kit for break shoes to fix the 30mm and 50mm brake shoes at the brake base plate.
fit to follow brake systems:
  • 4 set for brake drum front axle Wartburg 353
  • 4 set for brake drum rear axle W353 and 1.3
  • 2 sets for trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9)
12,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8316

Holder single part steel

Spring bearing for the brake shoe holder can be used for Trabant 500- 601 front brake, Wartburg 353 and Wartburg 1,3.
  • material: steel
  • priece for each piece
  • two pieces will be needed for each brake shoe
  • delivery as an single part
3,83 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7098

Pressure spring for brake shoes

Spring to fix the break shoes at the brake base plate.
fit to follow brake systems:
  • 4 pieces for brake drum front axle Wartburg 353
  • 4 pieces for brake drum rear axle W353 and 1.3
  • 4 pieces for brake drum front axle B1000 and B1000-1
  • 4 pieces for brake drum rear axle B1000, B1000-1
  • 2 pieces for trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9)
  • delivery as an single part
  • made in Germany
2,83 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8195

release spring for brake shoes, long

long version of release spring for break shoes
fit to follow brake systems:
  • brake drum front axle Wartburg 353 (two pieces for each wheel side)
  • brake drum rear axle W353 (one piece for each wheel side)
  • brake drum front axle B1000 (two pieces for each wheel side)
  • brake drum rear axle B1000 (one piece for each wheel side)
  • trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9): one piece for each wheel side
3,18 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6454

release spring for brake shoes, short

short version of release spring for break shoes
fit to follow brake systems:
  • brake drum rear axle Wartburg 353 (one piece for each wheel side)
  • brake drum rear axle B1000 (one piece for each wheel side)
  • trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9): one piece for each wheel side
2,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6455

rigth thrust rod for brake shoes

thrust rod fit to the right side of rear wheel brake

fit to follow brake systems:
  • rigth brake drum rear axle Wartburg 353 with brake shoe wide of 50mm (one piece)
  • right brake drum front axle B1000 (one piece)
  • rigth brake drum rear axle Multicar M22 (one piece)
24,31 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6471

left thrust rod for brake shoes

thrust rod fit to the left side of rear wheel brake

fit to follow brake systems:
  • left brake drum rear axle Wartburg 353 with brake shoe wide of 50mm (one piece)
  • left brake drum front axle B1000 (one piece)
  • left brake drum rear axle Multicar M22 (one piece)
24,31 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6472
Wheel brake cylinder original and repro

Wheel brake cylinder, rear brake

This brake cylinder for rear wheel brake fit to Wartburg 353 (with disc brake at the front axle) and Wartburg 1.3.
Can be used for all body types like Limousine, Tourist and Trans.
  • fit to brake shoes with the wide of 30mm
  • piston diameter 19mm
  • one piece will be needed for each wheel side
  • made in EU
27,12 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3087

Wheel brake cylinder ATE, rear brake

This brake cylinder is made by ATE.
Fit for rear wheel brake fit to Wartburg 353 (with disc brake at the front axle) and Wartburg 1.3.
Can be used for all body types like Limousine, Tourist and Trans.
  • fit to brake shoes with the wide of 30mm
  • piston diameter 19mm
  • one piece will be needed for each wheel side
  • Producer: ATE
65,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8447
The product category Wartburg 353 > Spare parts > Brakes > Rear brake is spread over 6 sites:
123456
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Papo Spielfiguren