This site in german: Barkas B 1000 > Ersatzteile > Getriebe 
You are here: > Barkas B 1000> Spare parts> gearbox

spare parts and accessorys for the Barkas B1000 and B1000-1

The product category Barkas B 1000 > Spare parts > gearbox is spread over 2 sites:

Driveshaft sleeves Barkas 

Sleeve rubber ( inner universal shaft side )

Rubber sleeve to protect the inner joint (gearbox side)of universal shaft.
Fit to to older drive shafts (singe hinge system) of Barkas B1000.
  • complete new production
  • made in EU
  • material: rubber, black
  • for each drive shaft one piece will be needed

Additional needed accessory:
14,26 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4418

Band clamp, plastic for sleeve rubber ( outer universal shaft side )

Clamp for rubber sleeve other universal shaft of Barkas B1000 and B100-1 and inner sleeve for Barkas with single hinge universal shaft.
  • material: plastic, black
  • length: 750 mm, width: 8 mm
  • made in Germany
  • 4 pieces will be needed for the type with single hinge drive shaft, 2 pieces will be needed for the type with double hinge drive shaft
3,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8544

Band clamp for sleeve rubber ( outer universal shaft side )

Clamp for rubber sleeve other universal shaft of Barkas B1000 and B100-1 and inner sleeve for Barkas with single hinge universal shaft.
  • material: stainless steel
  • length: 680 mm, width: 8 mm
  • made in Germany
  • 4 pieces will be needed for the type with single hinge drive shaft, 2 pieces will be needed for the type with double hinge drive shaft
4,85 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6552

Band clamp for inner sleeve rubber ( inner universal shaft side )

Clamp for rubber sleeve inner universal shaft of Barkas B1000 with single hinge universal shaft.
  • material: stainless steel
  • length: 360 mm, width: 4,6 mm
  • made in Germany
  • 2 pieces will be needed
2,48 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8010

Sliding sleeve halves (universal shaft)

Sliding sleeve halves for mounting sleeve rubber (wheel side) at universal shaft of Barkas B1000 and B1000-1.
Delivery as an one paar (2 pieces).
For each drive shaft, one set of sliding pieces will be needed.
Price for one pair will be 45,60 €
54,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6365

One pair of sliding sleeve halves for drive shaft

One pair of sliding sleeve halves for mounting between sleeve rubber (wheel side) and drive shaft of Barkas B1000

These sliding sleeve halves are made of thermosetting plastic, so they are more stable than the new produced one made of rubber
For each shaft one pair will be needed.
65,20 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7026

Rubber spring for engine and gear box

Engine mount as an rubber-metal-block for motor- and gearbox- holder of the Barkas B1000 2-stroke and Wartburg 353.
The rubber spring has got on one side an bolt connection (M8 stud) and the other side an inside nut (M8 female thread)
Engine mounts are degenerating the vibrations of the engine to the car body.
  • delivery as an single part, without any mounting bits
  • for Barkas one piece will be needed
  • for Wartburg two pieces will be needed
  • rubber-metal-block

additional needed special tools for mounting:
  • engine lifter / engine carrier
13,39 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4441

gear lever collar

collar for gear lever of B1000 (2-stroke)
  • made of black rubber
  • length total: ca 195 mm
  • width total: ca 178 mm
  • made in EU
26,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6590

Drive shaft overhauled

Complete overhauled driven shaft for Barkas B1000 and B1000-1.
Fit to the left and right hand.
  • overhauled spare part
  • old part have to be shiped to our company in advance!
exchange part
580,13 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 4420

Cylindrical roller for freewheel 8x12

Single part of the cylindrical roller for the freewheel of the Barkas B1000 (old and later type of gearboxes and B1000-1.
  • 12 pieces will be needed
  • zero mark: diameter 8,00mm
  • length: 12mm
  • made in Germany
price for each one
2,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7392

Freewheel crate complete

The set included: 1 x Freewheel cam, 12 x Clinder roller and 1x Freewheel crate.
Fit for gearboxes type WA 10,5 S4 M (latest 2 stroke model with mecanical cluth) Barkas B1000 and B1000-1.
240,00 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 4410

Woodruff key for outer universal shaft

Fitted key for outer stub axle for the final drive.
Barkas B1000, old version of drive shaft.
  • 2 pieces will be needed
3,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8540
The product category Barkas B 1000 > Spare parts > gearbox is spread over 2 sites:
12
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas