spare parts and accessorys for the Barkas B1000 and B1000-1

The complete offer in spare parts and accessorys for the Barkas B1000 and B1000-1

Seals for the Barkas gearbox-clutch shaft

Radial sealing D20 x 40 x 10 with dust-lip

Detail

Radial sealing for cluthch-shaft gearbox side.

made in Germany
with additionally dust-lip
one piece will be needed
fit to gearbox of Trabant 601 (all types with synchronization) and fit to old type of B1000 gearbox

4,68 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6244

Radial sealing D20 x 40 x 7 SL

Detail

Radial sealing with additional dust lip for clutch-shaft gearbox side for

Fit to:

Trabant 1.1
Wartburg 1.3
B1000 (2-stroke engine with new type of gear box) and B1000-1 (4-stroke)
made in Germany
one piece needed

6,72 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6388

Radial sealing D20 x 40 x 7

Detail

Shaft sealing in normal version without dust lip for cluthch-shaft gearbox side (gearbox input shaft).

fit to the vehicles Trabant 1.1, Wartburg 1.3 and B1000
without dust lip
made in Germany
one piece will be needed

6,31 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6069

Sealing rings gerabox driveshaft side Barkas

Radial shaft seal 52 x 68 x 8

Detail

Radial sealing for the gearbox connection side of the dirve shafts.
Fit to all Barkas B1000 and B1000-1 gearboxes late type with mechanical clutch system.

material: NBR
made in Germany
for each side of gearbox (differential gear) is one piece needed, total 2 pieces

8,11 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6391

Radial shaft seal 52 x 68 x 8 SL

Detail

Radial sealing for the gearbox connection side of the dirve shafts.
Sealing ring inclusve dust lip (WAS)
Fit to all Barkas B1000 and B1000-1 gearboxes late type with mechanical clutch system.

material: NBR
with additional dust lip
made in Germany
for each side of gearbox (differential gear) is one piece needed, total 2 pieces

8,51 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7390

Radial shaft seal 42 x 55 x 7 SL

Detail

Radial sealing for the gearbox connection side of the dirve shafts.
Fit to all Barkas B1000 gearboxes old type with hydraulic clutch system.

material: NBR
with additional dust lip
made in Germany
for each side of gearbox (differential gear) is one piece needed, total 2 pieces

8,10 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7204

Sealing for gear shifter, gearbox

Detail

Rubber sealing for mounting on top of the gearbox to seal the gear shifting shaft.
Fit to all Barkas B1000 gearboxes old type with hydraulic clutch system and late gearboxes with wire clutch system.
The part is new producted in Germany from one of our own made moulds.
Best quality, size and form are the same like the original ones.

material: NBR
made in Germany
for each gearbox one piece will be needed

13,39 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8144

O-seal 110 x 3 bearing bushing

Detail

Rubber sealing ring for the gearbox bearing bushing (main bearing differential gear).
Fit to all Barkas B1000 gearboxes old type with hydraulic clutch system and late gearboxes with wire clutch system.

material: NBR 70
made in Germany
for each side of gearbox (differential gear) is one piece needed, total 2 pieces

2,75 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7612

Flexible shaft for speedometer

Detail

Speedo shaft to connect the gearbox and the speedometer.
Fit for all types of Barkas B1000 two stroke.

one piece will be needed

41,62 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4399

Driveshaft sleeves Barkas

Sleeve rubber ( outer universal shaft side ), splited

Detail

Sleeve can be used for the models Barkas B1000 and B1000-1.
Fit to cars with douple hinge universal shaft and with single hinge driven shaft.
Can be mounted without disassembly the driven shafts.

material: rubber, black
delivery without equipment
made in EU
one piece will be needed for each wheel

additional needed parts:

19,68 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4416

Sleeve rubber ( outer universal shaft side )

Detail

Sleeve can be used for the models Barkas B1000 and B1000-1.
Fit to all Barkas B1000 with douple hinge universal shaft and with single hinge driven shaft and Barkas B1000-1.
Mounting only after disassembly the driven shafts.

material: rubber, black
delivery without equipment
made in EU
one piece will be needed for each wheel

additional needed parts:

18,26 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4417

Sleeve rubber ( inner universal shaft side )

Detail

Rubber sleeve to protect the inner joint (gearbox side)of universal shaft.
Fit to to older drive shafts (singe hinge system) of Barkas B1000.

complete new production
made in EU
material: rubber, black
for each drive shaft one piece will be needed

Additional needed accessory:

band-clamp, LDM-part.no.: 655

14,26 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4418

Band clamp, plastic for sleeve rubber ( outer universal shaft side )

Detail

Clamp for rubber sleeve other universal shaft of Barkas B1000 and B100-1 and inner sleeve for Barkas with single hinge universal shaft.

material: plastic, black
length: 750 mm, width: 8 mm
made in Germany
4 pieces will be needed for the type with single hinge drive shaft, 2 pieces will be needed for the type with double hinge drive shaft

3,81 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8544

Band clamp for sleeve rubber ( outer universal shaft side )

Detail

Clamp for rubber sleeve other universal shaft of Barkas B1000 and B100-1 and inner sleeve for Barkas with single hinge universal shaft.

material: stainless steel
length: 680 mm, width: 8 mm
made in Germany
4 pieces will be needed for the type with single hinge drive shaft, 2 pieces will be needed for the type with double hinge drive shaft

4,85 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6552

Band clamp for inner sleeve rubber ( inner universal shaft side )

Detail

Clamp for rubber sleeve inner universal shaft of Barkas B1000 with single hinge universal shaft.

material: stainless steel
length: 360 mm, width: 4,6 mm
made in Germany
2 pieces will be needed

2,48 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8010

Sliding sleeve halves (universal shaft) Detail Sliding sleeve halves for mounting sleeve rubber (wheel side) at universal shaft of Barkas B1000 and B1000-1. Delivery as an one paar (2 pieces). For each drive shaft, one set of sliding pieces will be needed.
Price for one pair will be 45,60 €	54,15 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6365

One pair of sliding sleeve halves for drive shaft Detail One pair of sliding sleeve halves for mounting between sleeve rubber (wheel side) and drive shaft of Barkas B1000 These sliding sleeve halves are made of thermosetting plastic, so they are more stable than the new produced one made of rubber For each shaft one pair will be needed.
65,20 €inclusive VAT, plus shipping costs temporary not available Art.No. 7026

Rubber spring for engine and gear box

Detail

Engine mount as an rubber-metal-block for motor- and gearbox- holder of the Barkas B1000 2-stroke and Wartburg 353.
The rubber spring has got on one side an bolt connection (M8 stud) and the other side an inside nut (M8 female thread)
Engine mounts are degenerating the vibrations of the engine to the car body.

delivery as an single part, without any mounting bits
for Barkas one piece will be needed
for Wartburg two pieces will be needed
rubber-metal-block

additional needed special tools for mounting:

engine lifter / engine carrier

13,39 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4441

gear lever collar

Detail

collar for gear lever of B1000 (2-stroke)

made of black rubber
length total: ca 195 mm
width total: ca 178 mm
made in EU

26,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6590

Drive shaft overhauled

Detail

Complete overhauled driven shaft for Barkas B1000 and B1000-1.
Fit to the left and right hand.

overhauled spare part
old part have to be shiped to our company in advance!

exchange part

580,13 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 4420

Cylindrical roller for freewheel 8x12

Detail

Single part of the cylindrical roller for the freewheel of the Barkas B1000 (old and later type of gearboxes and B1000-1.

12 pieces will be needed
zero mark: diameter 8,00mm
length: 12mm
made in Germany

price for each one

2,49 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7392

Freewheel crate complete Detail The set included: 1 x Freewheel cam, 12 x Clinder roller and 1x Freewheel crate. Fit for gearboxes type WA 10,5 S4 M (latest 2 stroke model with mecanical cluth) Barkas B1000 and B1000-1.
240,00 €inclusive VAT, plus shipping costs temporary not available Art.No. 4410

Woodruff key for outer universal shaft

Detail

Fitted key for outer stub axle for the final drive.
Barkas B1000, old version of drive shaft.

2 pieces will be needed

3,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8540

The complete offer in spare parts and accessorys for the Barkas B1000 and B1000-1

* All prices inclusive VAT and plus shipping costs.