This site in german: Barkas B 1000 > Ersatzteile > Kraftstoffsystem 
You are here: > Barkas B 1000> Spare parts> Fuel system

Fuel system

The product category Barkas B 1000 > Spare parts > Fuel system is spread over 9 sites:

Carburettor idler jet BVF 40F (M5-80)

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 80
  • Jet thread: M5
  • delivery as single part
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8408

Carburettor idler jet BVF 40F (M5-85)

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 85
  • Jet thread: M5
  • delivery as single part
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8409

Carburettor idler jet BVF 40F (M5-90)

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 90
  • Jet thread: M5
  • delivery as single part
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8410

Self-repair-set carburettor 40F

6-part jet set for the carburettor BVF 40F of Wartburg 353, B1000.
Called Berliner-carburettor 40F
Delivery inclusive gauge needle valve and Mixture screw BVF 40F.
  • Material: brass / rubber
  • one set will be needed
  • made in Germany / EU
19,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6985

Mounting bolt for throttle valve

Screw for fix the butterfly valve at the throttle shaft.
Fit for the Berlin carburettor BVF 40F.
Please note: this screw have to be mounted properly, use Threadlocking - medium strength (Art.-Nr.:6380).
Lose screws can cause worse engine damages!
  • Raised countersunk-head screw
  • delivery as single part
  • total: 2 pieces will be needed
0,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8411

Hose kit for carburettor 40 F

Connection hose for the idle system of the carburettor type BVF 40F called Berliner Carburettor
Fit to Wartburg 353, B1000.
  • Delivery inclusive two hose clamps
  • Made in Germany
  • one kit will be needed
5,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8419

Spring for idle screw, carburettor

Pressur spring for idle adjusting screw at the carburettor.
Fit for:
  • Straitdraft carburetor H 362- : Wartburg 311, 312 and 313
  • Straitdraft carburetor H 362- : Framo V901
  • Straitdraft carburetor H 362- : fire fighter pump TS8
  • Straitdraft carburetor : P70, F8
  • Downdraught carburettor BVF36F: Robur LO, Wartburg 353
  • Downdraught carburettor BVF40F: Wartburg 353, Barkas B1000
  • Block carburettor 28HB: Trabant 500,600 and 601

  • delivery as single part
  • surface: galvaniced
  • made in Germany
  • one piece will be needed
1,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8459

Spring accelerator pump for carburettor (old type) 40 F

Pessure spring for the aditional accelerator pump of the carburettor type BVF 40F. Fit for Wartburg 353 and B1000.
For dismounting and mounting is it necessitating to split the carurettor case.
Exact mounting place: please click on Detail
  • Reproduction made in Germany
  • surface: galvaniced
  • one piece will be needed
3,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8468

Mounting nut for accelerating pump

Nut and secure washer for fix the tappet of the accelerating pump.
Fit for the Berlin carburettor BVF 40F.
For dismounting and mounting is it necessitating to split the carurettor case.
Exact mounting place: please click on Detail
  • scope of delivery: 1x nut and 1x spring washer
  • total: one pieces will be needed
0,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8442
The product category Barkas B 1000 > Spare parts > Fuel system is spread over 9 sites:
123456789
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Pocketbikes