Exhaust system

The product category Barkas B 1000 > Spare parts > Exhaust system is spread over 2 sites:

Exhaust manifold seal

Simple construction of the manifold seal. Material graphite texture paper.
Splitted seal (that is one exhaust manifold seal for two cylinder)

sealing between outlet side of the cylinder head and the exhaust manifold
fit to Trabant 1.1, Wartburg 1.3 und B1000-1 - bouth of this motors have got an cross streem cylinder head
scope of delivery one paar (2 pieces)

from 5,64 € to 4,98 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 31

Exhaust manifold seal with meatl ring

Detail

Better construction of the manifold seal. Material graphite texture paper with metal pressing ring for each cylinder.
Splitted seal (that is one exhaust manifold seal for two cylinder)

made in Germany by Elring
sealing between outlet side of the cylinder head and the exhaust manifold
fit to Trabant 1.1, Wartburg 1.3 and Barkas B1000-1- all of this motors have got an cross streem cylinder head
scope of delivery one paar (2 pieces)

normaly 18,77 € now 16,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6260

Exhaust manifold seal

Detail

Paper seal with dry graphite. It fit to all Wartburg 353, 312, 311 and B-1000 with 3-cylinder two stroke engine.

very good quality of material and with good dimension accuracy
without metall ring
inner diameter: 43 mm (1,693 inch)
three pieces will be needed
made in Germany (only available by LDM-Tuning)

4,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3011

Exhaust manifold seal with metall ring

Detail

Paper seal with dry graphite. It fit to all Wartburg 353, 312, 311 and B-1000 with 3-cylinder two stroke engine. Usefull for all tuning engines for example RS 1000, Leutert.

brilliant quality with metall ring
inner diameter: 45 mm
three pieces will be needed
made in Germany

15,77 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6706

Exhaust muffler an pipes Barkas B1000-1 (4-takt)

Presilencer B1000-1 (4 stroke)

Detail

Presilencer for Barkas B1000-1 with four stroke engine.

material: sheet metal, basic colour
delivery without mounting parts
made in EU
one piece will be needed

115,06 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8606

Connection pipe B1000-1 (4 stroke)

Detail

Connection pipe between presilencer and aftermuffler for Barkas B1000-1 with four stroke engine.

material: sheet metal, basic colour
delivery without mounting parts
made in EU
one piece will be needed

68,24 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8605

After muffler B1000-1 (4 stroke)

Detail

Silencer for Barkas B1000-1 with four stroke engine.

material: sheet metal, basic colour
delivery without mounting parts
made in EU
one piece will be needed

138,69 €inclusive VAT, plus shipping costs

Delivery in 5 days.

Art.No. 8546

Delivery only at advance payment.

pipe clamp d=42,5mm

Detail

pipe clamp made of 2mm steel strip
zinc-coated
widht: 25mm

Following a table on which places of the cars the pipe clamps will be used:

vehicle	pipe connection from	to
Trabant 1.1	exhaust input pipe	pre-silencer
	pre-silencer	Rear Muffler with pipes
Wartburg 353	Rear Muffler with pipes	muffler with pipes
Wartburg 1.3	exhaust input double pipe	pre-silencer
	pre-silencer	connection pipe
	connection pipe	Rear Muffler with pipes

3,95 €inclusive VAT, plus shipping costs

Delivery in 5 days.

Art.No. 6344

Delivery only at advance payment.

Clamp

Detail

simple pipe clamp
zinc-coated

Following a table on which places of the cars the pipe clamps will be used:

vehicle	pipe connection from	to
Trabant 1.1	exhaust input pipe	pre-silencer
	pre-silencer	Rear Muffler with pipes
Wartburg 353	Rear Muffler with pipes	muffler with pipes
Wartburg 1.3	exhaust input double pipe	pre-silencer
	pre-silencer	connection pipe
	connection pipe	Rear Muffler with pipes

2,83 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 37

1+2

Spray on the basis of special mixture of resins and aluminium pigments.
Aluminium-zinc doubleprotection.
Best resistance to high temperatures.
Excellent for use at exhaust systems and for car body works.

contens: 400ml
product is free of FCKW
heat resistance up to approx 800 °C

price: 46,05 Euro / liter

18,42 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7493

Pipe clamp D=48,5mm stainless steel

Detail

Exhaust clamp made of stainless steel as ideal addition to the stainless connection pipe Wartburg 353 (LDM-part.no.: 6832)
Pipe - diameter at the expanded end: 48 mm
Mounting place:

1x connetion: main silencer - connection pipe
1x connection: connection pipe - exhaust aftermuffler