Exhaust system

The complete offer in Exhaust system

Mufflers and pipes Barkas B1000 (2-takt)

screw for Exhaust manifold (connection with pre silencer)

Detail

hexagon head screw M10 x 50
Delivery complete with nut, strength class 10.9

Wartburg 353: two pieces will be needed
Barkas B1000: three pieces will be needed

2,82 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6293

Pre-silencer ( two stroke )

Detail

Main silencer for Barkas B1000 two stroke engine.
This part is an new reproduction in best quality.
mounting: in the beginning of the exhaus system, between exhaust manifold and connection pipe.

material: sheet metal, basic colour
delivery without mounting parts
made in EU
one piece will be needed

Additional needed mounting parts (not scope of delivery of the echaust):
3x Screw for Exhaust manifold (connection with pre silencer) (part.-No.:6293)
1x Holding device for pre-silencer (part.-No.:4007)
1x Retainer, round, straight (part.-No.:4006)
1x Pipe clamp D= 48mm (part.-No.:4005)
oder
1x Pipe clamp D= 48,5mm (part.-No.:6345)

268,11 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4000

Holding device for pre-silencer

Detail

Holding device for pre-silencer
for Barkas B1000 2 stroke engine
one piece will be needed

38,74 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 4007

Connection pipe ( two stroke )

Detail

Exhaust tube for Barkas B1000 two stroke.
mounting: between main silencer and aftermuffler

material: metal pipe, basic colour
delivery without mounting parts
made in EU
one piece will be needed

89,81 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4001

After muffler ( two stroke )

Detail

Silencer for Barkas B1000 two stroke engine.
mounting: between connection pipe and muffler with pipe.

material: sheet metal, basic colour
delivery without mounting parts
made in EU
one piece will be needed

128,16 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4002

After muffler with pipe ( two stroke )

Detail

Silencer with pipe for Barkas B1000 two stroke.
mounting: in the end of the exhaus system, next to the aftermuffler.

material: sheet metal, basic colour
delivery without mounting parts
made in EU
one piece will be needed

79,83 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4003

Clamp D=45mm

Detail

universal-clamp for exhaust pipe D=45mm

Barkas B1000 two stroke 1 piece needed
(connection Exhaust aftermuffler - Muffler with pipe)

2,54 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4004

Pipe clamp D=45mm

Detail

universal-clamp for exhaust pipe D=45mm

made of 2mm steel strip
zinc-coated
width: 25mm

Barkas B1000 two stroke 1 piece needed
(connection Exhaust aftermuffler - Muffler with pipe)

4,34 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6359

universal-clamp for exhaust pipe D=48mm

- 2 pieces will be needed for Wartburg 353 (two stroke)
(Pre-silencer - connection pipe - Exhaust aftermuffler)
- 2 pieces will be needed for Barkas B1000 (two stroke)
(Pre-silencer - connection pipe - Exhaust aftermuffler)
- 1 piece will be needed for Trabant
(Tuning pre-silencer - Tuning connection pipe )

2,45 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4005

pipe clamp D=48,5mm

Detail

universal-clamp for exhaust pipe D=48mm

made of 2mm steel strip
zinc-coated
width: 25mm

- 2 pieces will be needed for Wartburg 353 (two stroke)
(Pre-silencer - connection pipe - Exhaust aftermuffler)
- 2 pieces will be needed for Barkas B1000 (two stroke)
(Pre-silencer - connection pipe - Exhaust aftermuffler)
- 1 piece will be needed for Trabant
(Tuning pre-silencer - Tuning connection pipe )

4,76 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6345

Retainer, round, straight

Detail

Rubber-metal-component for mounting the exhaust mufflers and pipes at the subfloor or the car frame.
The rubber part ist round made and at the middle constricted to reduce vibration
transmissions.
The metal connection tongues with elongated holes are fixed staigth.

fit to all types of Barkas B1000 and B1000-1
also this retainer can be used universal
material: rubber-steel (galvaniced)
outside diameter: 41mm
constricted diameter (rubber): 23mm
length cylindrical part: 34mm
length total:84mm
for mounting bolts: 6-8mm
for Barkas, 3 pieces will be needed
made in EU

4,53 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4006

Exhaust manifold seal

Detail

Simple construction of the manifold seal. Material graphite texture paper.
Splitted seal (that is one exhaust manifold seal for two cylinder)

sealing between outlet side of the cylinder head and the exhaust manifold
fit to Trabant 1.1, Wartburg 1.3 und B1000-1 - bouth of this motors have got an cross streem cylinder head
scope of delivery one paar (2 pieces)

from 5,64 € to 4,98 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 31

Exhaust manifold seal with meatl ring

Detail

Better construction of the manifold seal. Material graphite texture paper with metal pressing ring for each cylinder.
Splitted seal (that is one exhaust manifold seal for two cylinder)

made in Germany by Elring
sealing between outlet side of the cylinder head and the exhaust manifold
fit to Trabant 1.1, Wartburg 1.3 and Barkas B1000-1- all of this motors have got an cross streem cylinder head
scope of delivery one paar (2 pieces)

normaly 18,77 € now 16,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6260

Exhaust manifold seal

Detail

Paper seal with dry graphite. It fit to all Wartburg 353, 312, 311 and B-1000 with 3-cylinder two stroke engine.

very good quality of material and with good dimension accuracy
without metall ring
inner diameter: 43 mm (1,693 inch)
three pieces will be needed
made in Germany (only available by LDM-Tuning)

4,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3011

Exhaust manifold seal with metall ring

Detail

Paper seal with dry graphite. It fit to all Wartburg 353, 312, 311 and B-1000 with 3-cylinder two stroke engine. Usefull for all tuning engines for example RS 1000, Leutert.

brilliant quality with metall ring
inner diameter: 45 mm
three pieces will be needed
made in Germany

15,77 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6706

Exhaust muffler an pipes Barkas B1000-1 (4-takt)

Presilencer B1000-1 (4 stroke)

Detail

Presilencer for Barkas B1000-1 with four stroke engine.

material: sheet metal, basic colour
delivery without mounting parts
made in EU
one piece will be needed

115,06 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8606

Connection pipe B1000-1 (4 stroke)

Detail

Connection pipe between presilencer and aftermuffler for Barkas B1000-1 with four stroke engine.

material: sheet metal, basic colour
delivery without mounting parts
made in EU
one piece will be needed

68,24 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8605

After muffler B1000-1 (4 stroke)

Detail

Silencer for Barkas B1000-1 with four stroke engine.

material: sheet metal, basic colour
delivery without mounting parts
made in EU
one piece will be needed

138,69 €inclusive VAT, plus shipping costs

Delivery in 5 days.

Art.No. 8546

Delivery only at advance payment.

pipe clamp d=42,5mm

Detail

pipe clamp made of 2mm steel strip
zinc-coated
widht: 25mm

Following a table on which places of the cars the pipe clamps will be used:

vehicle	pipe connection from	to
Trabant 1.1	exhaust input pipe	pre-silencer
	pre-silencer	Rear Muffler with pipes
Wartburg 353	Rear Muffler with pipes	muffler with pipes
Wartburg 1.3	exhaust input double pipe	pre-silencer
	pre-silencer	connection pipe
	connection pipe	Rear Muffler with pipes

3,95 €inclusive VAT, plus shipping costs

Delivery in 5 days.

Art.No. 6344

Delivery only at advance payment.

Clamp

Detail

simple pipe clamp
zinc-coated

Following a table on which places of the cars the pipe clamps will be used:

vehicle	pipe connection from	to
Trabant 1.1	exhaust input pipe	pre-silencer
	pre-silencer	Rear Muffler with pipes
Wartburg 353	Rear Muffler with pipes	muffler with pipes
Wartburg 1.3	exhaust input double pipe	pre-silencer
	pre-silencer	connection pipe
	connection pipe	Rear Muffler with pipes

2,83 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 37

1+2

Alu Spray 400ml

Detail

Spray on the basis of special mixture of resins and aluminium pigments.
Aluminium-zinc doubleprotection.
Best resistance to high temperatures.
Excellent for use at exhaust systems and for car body works.

contens: 400ml
product is free of FCKW
heat resistance up to approx 800 °C

price: 46,05 Euro / liter

18,42 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7493

Pipe clamp D=48,5mm stainless steel

Detail

Exhaust clamp made of stainless steel as ideal addition to the stainless connection pipe Wartburg 353 (LDM-part.no.: 6832)
Pipe - diameter at the expanded end: 48 mm
Mounting place:

1x connetion: main silencer - connection pipe
1x connection: connection pipe - exhaust aftermuffler