This site in german: Barkas B 1000 > Ersatzteile > Motor 
You are here: > Barkas B 1000> Spare parts> Engine

Engine

Category Engine has the following subcategorys:

The product category Barkas B 1000 > Spare parts > Engine is spread over 9 sites:

Cylinder head packing * REINZ *

Can be used for Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.
Manufacturer: VIKTOR REINZ Germay
If the cylinder head packing will be changed, you need new expansion bolts as well!
  • one piece will be needed
28,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8198

Cylinder head packing

Can be used for Trabant 1.1 and Wartburg 1.3 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.
If the cylinder head packing will be replaced, you should use new expansion bolts as well!
  • one piece will be needed
17,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 632

Bolt for cylinder head

Expansion bolt can be used for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.

if the cylinder head packing will be changed, you need new expansion bolts as well!
  • inclusive ring washer
  • for true order of bolt tighten please see details
  • 10 piecse will be needed
4,53 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6407

Set of bolts for cylinder head

Expansion bolt can be used for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.

if the cylinder head packing will be changed, you need new expansion bolts as well!
  • inclusive ring washer
  • set consists of 10 pieces
  • for true order of bolt tighten please see details
  • one set will be needed
priece for each one: 3,53 Euro
35,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7360

Mounting bolt for throttle valve

Screw for fix the butterfly valve at the throttle shaft.
Fit for the Berlin carburettor BVF 40F.
Please note: this screw have to be mounted properly, use Threadlocking - medium strength (Art.-Nr.:6380).
Lose screws can cause worse engine damages!
  • Raised countersunk-head screw
  • delivery as single part
  • total: 2 pieces will be needed
0,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8411

Mounting nut for accelerating pump

Nut and secure washer for fix the tappet of the accelerating pump.
Fit for the Berlin carburettor BVF 40F.
For dismounting and mounting is it necessitating to split the carurettor case.
Exact mounting place: please click on Detail
  • scope of delivery: 1x nut and 1x spring washer
  • total: one pieces will be needed
0,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8442

Screw for Exhaust manifold (engine side)

Hexagon head bolt for mounting the mainfold at the engine block (exhaust side)
Delivery complete with washer.
  • strength class 10.9
  • SW 17
  • surface: galvaniced
  • Wartburg 353: 6 pieces will be needed
  • Barkas B1000: 6 pieces will be needed
2,52 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8483

Piston ring sealing crank shaft (W353/B1000)

Special piston ring for the sealing of the crank case. Can be mounted at the flywheel and the v-pully side, crankshaft with 45 hp or 50 hp.
  • fit to 2-stroke-engines of Wartburg 353 and Barkas B1000
  • 4 piece will be needed for each engine
42,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8556

Ring gear for starter

Starter gear to mount at the 4-stroke engine fly wheel.
  • Fit to the vehicles: Trabant 1.1, Wartburg 1.3 and
    Barkas B1000-1
  • 113 theeth
  • inside diameter: 212mm
  • wide: 8mm
  • made in EU
84,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 686

Sealing ring for plug screw

sealing ring for plug screw gearbox-oel
fit for gear boxes of follow vehicles:
  • material: aluminium
  • size: 22x27x1,5
  • one piece will be needed
  • Trabant 601
  • Trabant 1.1
  • Wartburg 353
  • Wartburg 1.3
  • B1000
  • and for most other vehicles
1,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6357

Grooved ball bearing for Fan-shaft Barkas B1000

FAG grooved ball bearing for fan shaft B1000 (2-stroke).
  • high quality made by FAG
  • size: 12 x 32 x 10
  • for the Fan shaft Barkas 2 pieces will be needed
9,44 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8644
The product category Barkas B 1000 > Spare parts > Engine is spread over 9 sites:
123456789
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Holzspielzeug