This site in german: Barkas B 1000 > Ersatzteile > Motor 
You are here: > Barkas B 1000> Spare parts> Engine
Navigation

Engine

Category Engine has the following subcategorys:

The complete offer in Engine

Engine block 50hp

engine mount for Wartburg 353 engine with 50 horse power.
Motor block is nutshells blasded for cleaning and coated wit 2-K varnish (black).
Cylinders are grinded and honed, inclusice 3 pistions made in Germany.
Scope of delivery complete with pistons, piston rings and pistion pins.
Please click on Detail for more informations about this exchange part.
Please note: Delivery without crankshaft!Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
1636,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6482

Bolt set for Engine block

One set of bolts for the crankcase Wartburg 311, 312, 353 and Barkas 1000 with 45 or 50 horse power.
  • delivery inclusive washer
  • use for mounting the cylinder block and the crank case
  • 8 pieces screws M10 different length and 6 pieces of screws M8
9,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8027

Engine block 45hp

engine mount for Wartburg 353 and Barkas 1000 with 45 horse power.
Motor block is nutshells blasded for cleaning and coated wit 2-K varnish (black).
Cylinders are grinded and honed, inclusice 3 pistions made in Germany.
Scope of delivery complete with pistons, piston rings and pistion pins.
Please click on Detail for more informations about this exchange part.
Please note: Delivery without crankshaft!Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
1636,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6999
1+1

Freeze cap 34mm

Pot shape plug for secure the motor block for freeze demages.
Fit to all cooling water holes diameter 34mm for the Wartburg and Barkas with two stroke motor.
made in Germany
  • three pieces will be needed
2,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7886

Freeze cap

Plate shape plug for secure the motor block for freeze demages.
Fit to all cooling water holes diameter 36mm for the Wartburg and Barkas with two stroke motor.
made in Germany
  • three pieces will be needed
6,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7255

Needle bearing for crankshaft, flywheel-side

needle bearing for additionally clamping of clutch-shaft in crankshaft

K 12 x 16 x 13
5,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6199

Crank shaft, 50hp

Crank shaft with standard version of conrod and common feet bearings made (cage of aluminiuml).
High qualitiy, overhauled in Germany
For engines of 2-stroke B1000 and for Wartburg 353 engine with 45/50 horsepower

Overhauling part:
Please send your overhaulable crankshaft to our company in advance. After checking the delivered part for the possibility of overhauling we will send you an email with all additional details.
Overhaul part, please send your crankshaft to our company in advance for repairing !
1904,00 €inclusive VAT, plus shipping costs
Delivery in 14 days.

Art.No. 6116

Crank shaft, half crank cheek, with reinforced lower bearing of conrod

Crank shaft (half crank cheek) with standard conrods but with strengthened lower bearings.
  • reinforced lower conrod bearings with steel cage in place of aluminium cage
  • scope of delivery: crank shaft inclusive needle bearings for piston pin und piston ring sealing
  • very good quality made in Germany


Overhauling part:
Please send your overhaulable crankshaft to our company in advance. After checking the delivered part for the possibility of overhauling we will send you an email with all additional details.
Overhaul part, please send your crankshaft to our company in advance for repairing !
2231,25 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6996

crank shaft, half crank cheek

Crank shaft with standard version of conrod and common feet bearings made (cage of aluminiuml).
High qualitiy, overhauled in Germany
For engines of 2-stroke B1000 and for Wartburg 353 engine with 45/50 horsepower

Overhauling part:
Please send your overhaulable crankshaft to our company in advance. After checking the delivered part for the possibility of overhauling we will send you an email with all additional details.
Overhaul part, please send your crankshaft to our company in advance for repairing !
1904,00 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6415
1+1

Piston ring sealing crank shaft (W353/B1000)

Special piston ring for the sealing of the crank case. Can be mounted at the flywheel and the v-pully side, crankshaft with 45 hp or 50 hp.
  • fit to 2-stroke-engines of Wartburg 353 and Barkas B1000
  • 4 piece will be needed for each engine
13,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6903

Special bolt flywheel (W353/B1000)

One-off-production of the hexagon screw for mounting the flywheel at the crankshaft.
  • tap: M8
  • spanner gap: 13
  • surface: galvanized
  • fit to 2-stroke-engines of Wartburg 311, 312, 313, 353, Framo, Barkas B1000
  • 5 pieces will be needed for each engine
6,20 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6904

safety plate flywheel (W353/B1000)

Locking plate for the five srews, which are necessary to mount the flywheel at crankshaft.
  • surface: galvanized with olive drap colour
  • fit to 2-stroke-engines of Wartburg 311, 312, 313, 353, Framo Barkas B1000
  • one piece will be needed for each engine
9,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 620

safety plate beltwheel (W353/B1000)

Locking plate for the two srews, which are necessary to mount the beltwheel at crankshaft.
  • surface: galvanized
  • fit to 2-stroke-engines of Wartburg, Barkas B1000
  • one piece will be needed for each engine
2,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7154

Cylinder head packing, copper sealing

Cylinder head packing is made of an special kind of sealing paper with dry graphite finish. The cylinder are sealed by single copper-metal-rings for each one, which are fixed at the paper packing.
one piece will be needed
  • Wartburg311,312 and 313, 2-stroke, 3-cylinder, 1000ccm, 8 bolts
  • Wartburg-353, 2-stroke, 3-cylinder, 1000ccm, 8 bolts
  • Barkas-B1000,2-stroke, 3-cylinder, 1000ccm, 8 bolts
  • compession sealing: copper
  • high quality made in Europe


The tightening torque and the sequence of mounting of the cylinder head nuts you can find at Art.No.:6318
68,70 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7986

Cylinder head packing, steel sealing

Cylinder head packing is made of an special kind of sealing paper with dry graphite finish. The cylinder are sealed by single metal-rings for each one, which are fixed at the paper packing.
one piece will be needed
  • Wartburg311,312 and 313, 2-stroke, 3-cylinder, 1000ccm, 8 bolts
  • Wartburg-353, 2-stroke, 3-cylinder, 1000ccm, 8 bolts
  • Barkas-B1000,2-stroke, 3-cylinder, 1000ccm, 8 bolts
  • compession sealing: steel
  • high quality made in Germany


The tightening torque and the sequence of mounting of the cylinder head nuts you can find at Art.No.:6318
56,31 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 3120

Cylinder head nut

cylinder head nut fit to:
  • Wartburg-353, 2-stroke, 3-cylinder,1000ccm or 1200ccm, 8 or 12 bolts
  • Wartburg-3112-stroke, 3-cylinder,900 or 1000ccm, 8 or 12 bolts
  • Barkas-B1000,2-stroke, 3-cylinder,1000ccm, 8 bolts



The tightening torque and the sequence of mounting of the cylinder head nuts you can find at (Details)
1,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6318

Bolt for cylinder head

cylinder bols fit to:
  • Wartburg-353, 2-stroke, 3-cylinder,1000ccm or 1200ccm, 8 or 12 bolts
  • Wartburg-3112-stroke, 3-cylinder,900 or 1000ccm, 8 or 12 bolts
  • Barkas-B1000,2-stroke, 3-cylinder,1000ccm, 8 bolts
  • Framo 2-stroke, 3-cylinder 900ccm, 8 or 12 bolts



The tightening torque and the sequence of mounting of the cylinder head nuts you can find at (Details)
Special offer normaly 11,81 € now 8,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6931
2+1
1+1

Fan-shaft complete

Complete fanshaft consist of:
short and long fan shaft, flexible transmitter disc, sheet-metal profile with ball bearing and plastic fan.

complete set, pre-installed
133,43 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 4426

Fan-shaft, long

long fan-shaft with two textile reinforced rubber discs

new produced (not original)

one piece neeeded
48,39 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 4427

Fan-rubber disc for fan-shaft

Flexible fan rubber discto connect the both fan-shafts and the fan-shaft long in tandem with the shaft of water pump

two pieces needed for one B1000
12,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6239

Bearing ring for water pump shaft

Bearing washer for the water pump inside the cylinder head of the Warturg 353 and Barkas B1000.
Can be used for all types of water pumps without vintage limit.
  • made in Germany
  • delivery as an single part
  • metal, galvaniced
  • one pieces needed
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8204

Sealing for water pump

Speacial seling system for the water pump inside the cylinder head of the Warturg 353 and Barkas B1000.
Can be used for all types of water pumps without vintage limit.
  • made in Europe
  • inclusive rubber seal
  • for Wartburg 353 up to 5-85 will be two pieces needed
  • for Wartburg 353 from to 5-85 and Barkas B1000 will be one piece needed
32,03 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6770
Delivery only at advance payment.

Snap ring for grooved ball bearing

Circlip for grooved ball bearing 6301 for shaft of water pump Wartburg 353 and B1000 (2-stroke) without vintage limit.
  • Snap ring for bore
  • one piece will be needed
0,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6537

Grooved ball bearing for Fan-shaft and water pump shaft

FAG grooved ball bearing for shaft of water pump and fan shaft
for Wartburg 353 and B1000 (2-stroke)
  • high quality made by FAG
  • size: 12 x 37 x 12
  • for the water pump shaft of the Wartburg 353 and Barkas B1000: two pieces are needed
  • for the Fan shaft Barkas one piece will be needed
9,44 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6298

Fitted key 3 x 3,7

Woodruff key (3 x 3,7).
Can be used for additional fan-shaft Barkas B1000.
And olso for the connection between V-pully and Fan wheel water pump up to 5/85 or fan wheel water pump from 5/85 and (Water pump shaft 42cm up to 5/85 oder Water pump shaft from 6-85).
  • B1000: three pieces needed for complete fan-shaft
  • B1000 / W353: two pieces needed for shaft of waterpump
0,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6304

Starter 12V, complete (W353/B1000)

Starter inclusive magnet for starter fit to Wartburg 353 and Barkas B1000 (2-stroke).
Spare part is overhauled in Germany. High quality. Exchange part!
  • voltage: 12V
  • output: 0,58KW
  • pinion teeth: 9

Overhaul part, please send the clutch and clutch disc in advance to our company
Overhaul part, please send your strater to our company in advance
275,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3155

Freewheel for starter 12V (W353/B1000)

Starter freewheel complete premounted inclusive pinion (9 teeth).
Fit to Wartburg 353 and Barkas B1000 (2-stroke).
This part is made in Europe. High quality, best replacement for the genuine spare part.
  • one piece will be needed
Original spare part number: 820.11-230
52,43 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7643

Magnet, complete for starter 12V

39,79 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6067

mounting set for starter 12V

mounting set for starter consist of:
  • 2x screw M12 x 100
  • 2x washer
  • 2x nut M12
5,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6386

Ring gear for starter

Ring gear for starter fit to Wartburg 353 all models and Barkas B1000 with 2-stroke engine.
The starter gear can be used for the clutch systems D=180mm and D=200mm (only mounted at Barkas).
The ring gear does NOT fit to the Barkas B1000-1 (with four stroke engine)
{[one piece will be needed][number of teeth: 97][made in EU]}
25,96 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 4444
1+1

Starter 12V *reclaimed* (T1.1/W1.3/B1000-1)

Complete overhauled starter for Trabant 1,1 Wartburg 1,3 and Barkas B1000-1
with 4-cylinder 4-stroke engine.
Delivery inclusive solenoid switch.
Please send your Trabant starter 12V in advance to our company for reparing.
  • delivery inclusive starter magnet
  • for 12V system
  • overhauled in Germany
Overhaul part, please send the starter motor in advance to our company
235,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6417

Rubber spring for radiator

spring suspension for cooling water radiatior
fastening the radiator at the carbody

material: rubber with thread bolt on both ends
three pieces will be needed
9,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4440

Rubber spring for engine and gear box

Engine mount as an rubber-metal-block for motor- and gearbox- holder of the Barkas B1000 2-stroke and Wartburg 353.
The rubber spring has got on one side an bolt connection (M8 stud) and the other side an inside nut (M8 female thread)
Engine mounts are degenerating the vibrations of the engine to the car body.
  • delivery as an single part, without any mounting bits
  • for Barkas two pieces will be needed
  • for Wartburg two pieces will be needed
  • rubber-metal-block

additional needed special tools for mounting:
  • engine lifter / engine carrier
13,39 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4441

V-belt (W353 / B1000)

V-belt 10 x 1150 fit to Wartburg 353 and Barkas B1000 to transmit the rotary to the dynamo and to the wather pump shaft.
  • size: 10 x 1150 mm
  • new German production
Special offer normaly 14,40 € now 9,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3176

V-belt 10 x 1175 (B1000)

Standard V-belt with 1175mm length for the Barkas B1000 with two stroke engine.
The bet connects the V-pully at the crankshaft, the V-pully at the water pump shaft (cylinder head) and the dynamo.
The tautening will be implementing by the retaining plate for dynamo.
V-belt is made by an brand manufacturer in best quality.
  • Size: 10mm width, 1175mm long
  • teethed construction
  • one piece will be needed
  • made in Germany

additional needed tools:
  • no special tool needed for mounting
14,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6680

V-belt 10 x 1200 (B1000)

V-belt with 1200mm length for the Barkas B1000 with two stroke engine.
The bet connects the V-pully at the crankshaft, the V-pully at the water pump shaft (cylinder head) and the dynamo.
The tautening will be implementing by the retaining plate for dynamo.
V-belt is made by an brand manufacturer in best quality.
  • Size: 10mm width, 1200mm long
  • teethed construction
  • one piece will be needed
  • made in Germany

additional needed tools:
  • no special tool needed for mounting
18,59 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8258

V-belt 13 x 1250 (B1000)

V-belt with 1250mm length for the Barkas B1000 with two stroke engine and 13mm V-pullys.
The bet connects the V-pully at the crankshaft, the V-pully at the water pump shaft (cylinder head) and the dynamo.
The tautening will be implementing by the retaining plate for dynamo.
V-belt is made by an brand manufacturer in best quality.
  • Size: 13mm width, 1250mm long
  • teethed construction
  • one piece will be needed
  • made in Germany

additional needed tools:
  • no special tool needed for mounting
22,18 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8438
2+1
1+1

Mounting bolt for inlet pipe

Bolt for flange of the inlet pipe to the connection to the engine.
Fit to flange with the Berlin carburettor or the Jijkov-carburettor.
  • hexagon socket screw M8 x 16mm
  • strength class: 8.8
  • with external teeth lock washer
  • galvaniced
  • total: 8 pieces will be needed
0,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6880

ADDINOL gear box oil GS80W (GL60), 1 Litre

High-end-car-gearbox oil for Wartburg 353, Barkas B1000 and other vehicles
Made of german high-quality producer ADDINOL
  • for usability in countrys with central european weather (with a cold winter)
  • needed volume for one gearbox of Wartburg 353: 1,8 Litre
  • needed volume for one gearbox of Barkas B1000: 2,75 Litre
  • corresponds with the old name of viskosity: GL60 (SAE 80 EP)
  • SAE 80W; API GL-4; MIL-L-2105

homologations:
  • Mercedes-Benz 235.1
  • MAN 341
  • ZF TE-ML 02 A, 17A

application:
  • Hypoid gears with small offset
  • manual gear change-, steering- and distributing gear boxes

Additional comment: Notes for used oil disposalLink opens in a new window.
14,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6620

Valve for cooling water

Brass drain cock will be mounted direct on the motor block (exhaust side).
Fit to: Wartburg 311, 312,313, 353, Framo, Barkas B1000.
25,90 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6937

Exhaust manifold seal

Simple construction of the manifold seal. Material graphite texture paper.
Splitted seal (that is one exhaust manifold seal for two cylinder)
  • sealing between outlet side of the cylinder head and the exhaust manifold
  • fit to Trabant 1.1, Wartburg 1.3 und B1000-1 - bouth of this motors have got an cross streem cylinder head
  • scope of delivery one paar (2 pieces)
reduced from 5,64 € to 4,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 31

Exhaust manifold seal with meatl ring

Better construction of the manifold seal. Material graphite texture paper with metal pressing ring for each cylinder.
Splitted seal (that is one exhaust manifold seal for two cylinder)
  • made in Germany by Elring
  • sealing between outlet side of the cylinder head and the exhaust manifold
  • fit to Trabant 1.1, Wartburg 1.3 and Barkas B1000-1- all of this motors have got an cross streem cylinder head
  • scope of delivery one paar (2 pieces)
Special offer normaly 18,77 € now 16,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6260

Sealing ring for cooling water pipe

Rubber seal for the connection between water pipe and engine block water pump.
Fit to the cooling system of the Trabant 1.1, Wartburg 1.3 and B1000-1.
1,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7419

Bolt for flywheel

Special bolt for flywheel mounting.
Fit to the engines of the vehicles Trabant 1.1, Wartburg 1.3 or Barkas B1000-1.
  • 6 pieces will be needed
  • with dry threadlocker
  • grade: 12.9
  • made in Germany
3,13 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7422
Spare parts for the 4 stroke engine

Oilsump

Oil sump fit to all oilsump of Trabant 1,1 and wartburg 1,3 with four stroke engine
  • material: metal
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
91,61 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7129

Oel filter

Fit to Trabant 1,l and 1,3 engine (Wartburg and Barkas B1000-1). Scope of delivery inclusive sealing ring.
  • made in Germany
  • one piece will be needed
9,78 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1102
Delivery only at advance payment.

Screw for oel drain SW19

Oel drain screw plug. Fit to all oilsump of Trabant 1,1 and wartburg 1,3. Produced by FEBI.
  • spanner size: SW19
  • made in Germany
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
2,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7128

seal ring for oel drain screw plug

copper seal ring for oel drain screw plug. Fit to all oilsump of Trabant 1,1 and wartburg 1,3. Produced by ELRING.
  • dimensions: 14 x 20x 1,5
  • made in Germany
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
0,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6426

Chain Oil pump

Chain for the support of the Oilpump fit to all oilsump of Trabant 1,1 and wartburg 1,3 with four stroke engine
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
19,83 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7134

Oil pump

Oilpump fit to all oilsump of Trabant 1,1 and wartburg 1,3 with four stroke engine
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
178,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7133

Seal for oil pan

Oelsump seal fit to 4-stroke engine of Trabant 1.1 and Wartburg 1.3.
Approved quality made by ELRING. It is the seal between oil sump and engine block.
  • material: chaded spezial-sealing paper
  • made in Germany
  • one piece will be needed
21,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6342

Seal for oel pan

Very reasonable Seal for oel sump with medium quality. Fit to 4-stroke engine of Trabant 1.1 and Wartburg 1.3.The seal between oil sump and engine block.
  • Material:chaded sealing paper
  • made in EU
  • one piece will be needed
9,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 634

Sealing kit engine block down

Complete kit for the engine block. Fit to 4-stroke engine of Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
Made by Eling.
98,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7485

Crankshaft gear

Crankshaft gear for toothed belt. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • made in Germany
  • number of theeth: 44
  • one piece will be needed
91,11 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 7262
Delivery only at advance payment.

Bolt for V-pully crankschaft

Bolt with hexagon socket for the mounting of the V-pully at the crankshaft gear for toothed belt.
Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • four pieces will be needed
  • made in Germany
2,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7484

Bolt for crankshaft gear

High grade special bolt for the mounting of the crankshaft gear for toothed belt. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • one piece will be needed
  • made in Germany
5,41 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7482
Delivery only at advance payment.

Seal for water pipe

Paper sealing for the cooling water pipe connection to the engine block, rear side water pump.
Fit ot Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 with four stroke engines.
  • made in Germany
2,65 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 7483
Delivery only at advance payment.

Piston ring pliers

Piston ring mounting and demounting tool.
With this pliers the changing of the piston rings will be simple and save, because the rins are retained at the outside.
  • working dimensions: 1-100mm
  • surface: nickel-plated
  • with blue plastic handles
  • made in Germany
35,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7619

Cylinder head packing * ELRING *

Can be used for Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.
Manufacturer: ELRING
If the cylinder head packing will be changed, you need new expansion bolts as well!
  • one piece will be needed
39,67 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6327

Cylinder head packing * REINZ *

Can be used for Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.
Manufacturer: VIKTOR REINZ Germay
If the cylinder head packing will be changed, you need new expansion bolts as well!
  • one piece will be needed
42,89 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 8198

Cylinder head packing

Can be used for Trabant 1.1 and Wartburg 1.3 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.
If the cylinder head packing will be replaced, you should use new expansion bolts as well!
  • one piece will be needed
17,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 632

Bolt for cylinder head

Expansion bolt can be used for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.

if the cylinder head packing will be changed, you need new expansion bolts as well!
  • inclusive ring washer
  • for true order of bolt tighten please see details
  • 10 piecse will be needed
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6407

Set of bolts for cylinder head

Expansion bolt can be used for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.

if the cylinder head packing will be changed, you need new expansion bolts as well!
  • inclusive ring washer
  • set consists of 10 pieces
  • for true order of bolt tighten please see details
  • one set will be needed
priece for each one: 3,53 Euro
35,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7360

Mounting bolt for throttle valve, BVF 40F

Screw for fix the butterfly valve at the throttle shaft.
Fit for the Berlin carburettor BVF 40F.
Please note: this screw have to be mounted properly, use Threadlocking - medium strength (Art.-Nr.:6380).
Lose screws can cause worse engine damages!
  • Raised countersunk-head screw
  • delivery as single part
  • total: 2 pieces will be needed
0,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8411
Delivery only at advance payment.

Mounting nut for accelerating pump

Nut and secure washer for fix the tappet of the accelerating pump.
Fit for the Berlin carburettor BVF 40F.
For dismounting and mounting is it necessitating to split the carurettor case.
Exact mounting place: please click on Detail
  • scope of delivery: 1x nut and 1x spring washer
  • total: one pieces will be needed
0,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8442

Screw for Exhaust manifold (engine side)

Hexagon head bolt for mounting the mainfold at the engine block (exhaust side)
Delivery complete with washer.
  • strength class 10.9
  • SW 17
  • surface: galvaniced
  • Wartburg 353: 6 pieces will be needed
  • Barkas B1000: 6 pieces will be needed
2,52 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8483

Piston ring sealing crank shaft (W353/B1000)

Special piston ring for the sealing of the crank case. Can be mounted at the flywheel and the v-pully side, crankshaft with 45 hp or 50 hp.
  • fit to 2-stroke-engines of Wartburg 353 and Barkas B1000
  • 4 piece will be needed for each engine
42,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8556

Ring gear for starter

Starter gear to mount at the 4-stroke engine fly wheel.
  • Fit to the vehicles: Trabant 1.1, Wartburg 1.3 and
    Barkas B1000-1
  • 113 theeth
  • inside diameter: 212mm
  • wide: 8mm
  • made in EU
84,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 686

Sealing ring for plug screw

sealing ring for plug screw gearbox-oel
fit for gear boxes of follow vehicles:
  • material: aluminium
  • size: 22x27x1,5
  • one piece will be needed
  • Trabant 601
  • Trabant 1.1
  • Wartburg 353
  • Wartburg 1.3
  • B1000
  • and for most other vehicles
1,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6357

Grooved ball bearing for Fan-shaft Barkas B1000

FAG grooved ball bearing for fan shaft B1000 (2-stroke).
  • high quality made by FAG
  • size: 12 x 32 x 10
  • for the Fan shaft Barkas 2 pieces will be needed
9,44 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8644

Bolt set for Engine retainer

One set of bolts for mounting the engine at the retainer / supporting bracket. For Wartburg 311, 312, 353 and Barkas 1000 with 45 or 50 horse power.
  • delivery inclusive washer
  • 6 pieces screws M10 different length
  • one set will be needed
9,04 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8687

Inner spring for choke shaft, BVF 40F

Torsion spring for the starter flap shaft.
Fit for the Berlin carburettor BVF 40F.
For assembly it is necessary to dismantle the choke flap.
Please note: this screw have to be mounted properly, use Threadlocking - medium strength (Art.-Nr.:6380).
Lose screws can cause worse engine damages!
  • Spring made of stainless steel
  • delivery as single part
  • total: 1 piece will be needed
9,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8723
Delivery only at advance payment.

Other spring for choke shaft, BVF 40F

Outside torsion spring for the starter flap shaft.
Fit for the Berlin carburettor BVF 40F.
For assembly it is necessary to dismantle the choke flap.
Please note: this screw have to be mounted properly, use Threadlocking - medium strength (Art.-Nr.:6380).
Lose screws can cause worse engine damages!
  • Spring made of stainless steel
  • delivery as single part
  • total: 1 piece will be needed
9,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8725
Delivery only at advance payment.
The complete offer in Engine

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas