This site in german: Barkas B 1000 > Ersatzteile > Motor > Z√ľndung 
You are here: > Barkas B 1000> Spare parts> Engine> ignition

ignition

The product category Barkas B 1000 > Spare parts > Engine > ignition is spread over 7 sites:

Extensions pin for Dial gauge, 60mm

Extension for dial gauge. Fit to all offered gauges
  • thread: M2,5
  • diameter: 4mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in China
  • scope of delivery without seperate extension pin
  • non shock proof
3,09 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7302

Dial gauge simple type

High quality dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in Germany
  • scope of delivery without seperate extension pin
  • non shock proof
65,07 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6820

Dial gauge digitale type

Good quality dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in China
  • scope of delivery without seperate extension pin
  • non shock proof
45,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7301

Dial gauge simple type

Cheap dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in China
  • scope of delivery without seperate extension pin
  • non shock proof
24,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7300

Spark plug terminal universal 5 kOhm

Best terminal without metalcoat for all versions of sparks.
Good replacment as the old type of spark plugs with thread type M18.
Resistance type suppressor: 5kOhm
producer: NGK
inclusive rubber seal for ignition wire and spark plug.
7,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7724

Spark plug M18 - 175, NGK

Spark plug for using at tow stroke engines with thread M18.
Good replacement for the original spare part (W18).
The heating rate complies 175 (warm spark plug), best use for water cooled engines.
Made by NGK, Japan.
Bosch Nr. M175 T1
spanner gap: SW 21
11,04 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7529

Spark plug M18 - 260, NGK

Spark plug for using at tow stroke engines with thread M18.
Good replacement for the original spare part (T18).
The heating rate complies 260 (cold spark plug), best use for water and air cooled engines special for tuning engines.
Made by NGK, Japan.
Bosch Nr. M260 T1
8,64 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7531

Spark plug M18 - 225, NGK

Spark plug for using at tow stroke engines with thread M18.
Good replacement for the original spare part (T18).
The heating rate complies 225 (cold spark plug), best use for water and air cooled engines.
Made by NGK, Japan.
Bosch Nr. M225 T1
9,72 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7530

Spark plug M18 - 175, *ISOLATOR*

M18 spark plug. This part is an NOS spare part with thread M18 x 1,5mm.
The spanner gap is 26mm.
The heat rating is cose to 175. Can be used for wather cooled two stroke engines like Wartburg, Barkas, Framo, ZW1103
12,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 1192
The product category Barkas B 1000 > Spare parts > Engine > ignition is spread over 7 sites:
1234567
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas