ignition

Original terminal as straight version.
Fit to all spark plugs M14 with connector thread M4
With a five kohm resistor for suppression of interference it is a ideal part for most (2-stroke) vehicles, which were bulit in G.D.R.
For some ignitions systems (for example the Electronic ignition base plate) have only to use in tandem with such spark plug terminals (minimum resistor of 5 kohm)

• suppression of interference (5 kOhm)
• with no additional splash water protection for the ignition cable

Fit to all spark plugs M14

• suppression of interference (1 kOhm)
• splash water protected

Fit to all spark plugs M14 with connector thread M4
With a five kohm resistor for suppression of interference it is a ideal replacement part for most (2-stroke) vehicles, which were bulit in G.D.R.
For some ignitions systems (for example the Electronic ignition base plate have only to use in tandem with such spark plug terminals (minimum resistor of 5 kohm)

• suppression of interference (5 kOhm)
• with no additional splash water protection

Very good spare part for replacement the original one at all Barkas B1000 with two stroke enine.
Fit to all spark plugs M14 with connector thread M4
With a five kilo ohm resistor for suppression of interference it is a ideal replacement part for most (2-stroke) vehicles, which were bulit in G.D.R.

• suppression of interference (5 kOhm)
• three silicon ignition wires cuted and complete manufactured with spark plug terminals, high quality made in Germany
• one set will be needed

This spark plug is the basic type for Wartburg 353 and Barkas B1000 (2-stroke).
High quality product.
Plaese note: The electrode gap has to be adjusted compere to the ordes of the engine producer.

• producer: BeruAG Isolator, Germany
• spark plug tap: M14 x 1,25
• wrench opening: SW21
• rating: 175

One set of sparkplugs, 10 pieces inclusive.
This spark plug is the basic type for Wartburg 353 and Barkas B1000 (2-stroke).
High quality product.
Plaese note: The electrode gap has to be adjusted compere to the ordes of the engine producer.

• inclusive 10 pieces of spark plugs M14, 175
• producer: BeruAG Isolator, Germany
• spark plug tap: M14 x 1,25
• wrench opening: SW21
• rating: 175

One set of sparkplugs, 10 pieces inclusive.
Standard spark plug for engine of Trabant 601
High quality product.
Plaese note: The electrode gap has to be adjusted compere to the ordes of the engine producer.

• inclusive 10 pieces of spark plugs M14, 225
• producer: BeruAG Isolator, Germany
• spark plug tap: M14 x 1,25
• wrench opening: SW21
• rating: 225

standard spark plug for engine of Trabant 601
High quality product.
Plaese note: The electrode gap has to be adjusted compere to the ordes of the engine producer.

• producer: BeruAG Isolator, Germany
• spark plug tap: M14 x 1,25
• wrench opening: SW21
• rating: 225