Cooling system

The product category Barkas B 1000 > Spare parts > Engine > Cooling system is spread over 5 sites:

blow off valve for compensating reservoir, 50kPa (W353/B1000)

Blow off valve for coolant compensating reservoir of Wartburg 353 and 2-stroke version of Barkas B1000.
It will be mounted inside reservoir cap.

pressure: 50kPa
one piece will be needed
made in EU

20,53 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6553

blow off valve for compensating reservoir, 130kPa (W1.3/B1000-1)

Detail

Pressure valve for cooling water reservoir of Wartburg 1.3 and 4-stroke version of Barkas (B1000-1).
{[pressure: 130kPa][to mount inside the reservoir cap][one piece will be needed]}

Made in EU

24,54 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 618

Coolant hose, 15 x 3,5mm (yard goods)

Detail

rubber coolant hose with textile inset (DIN 73411 7/79)

up to 6 bar
Inner diameter: 15 mm (0,59 inch)
Thickness of wall: 3,5 mm (0,138 inch)
up to 125°C
Outer layer (EPDM): resistance to oil, ozone and aging through heat
Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Deliverable as yard goods. If order two pieces of this article we will deliver one piece with a length of two Meter.

price 17,92 Euro / meter

17,92 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6936

Coolant hose, 25 x 3,5mm (1 Meter)

Detail

rubber coolant hose with textile inset (DIN 73411 issue 1955)

working pressure: 3 bar
Inner diameter: 25 mm (1 inch)
Thickness of wall: 3,5 mm (0,138 inch)
Outer and inner layer made of black SBR-rubber quality
resistant against hot water with antifreeze admixture from -20°C up to +95°C

Only obtainable in pieces of one Meter.

Inexpensive alternative for coolant hose 25mm x 4,5mm with lower resistance against pressure and temperatureFit to many veteran cars, for instance Wartburg 311price 14,77 Euro / meter

14,77 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6948

Coolant hose, 25 x 4,5mm (1 Meter)

Detail

Cooling wather hose for the connection between thermostat housing cylinder head and upper connector cooling radiator. Used length: 53cm.
Rubber coolant hose with textile inset (DIN 73411 7/79)

bup to 6 bar
Inner diameter: 25 mm (1 inch)
Thickness of wall: 4,5 mm (0,177 inch)
up to 125°C
Outer layer (EPDM): resistance to oil, ozone and aging through heat
Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Only obtainable in pieces of one Meter.

Made in Germany

29,86 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7282

Coolant hose, 25 x 4,5mm (2 Meter)

Detail

Cooling wather hose for the connection between lower connector cooling radiator and water pump housing. Used length: 97,5cm.
Rubber coolant hose with textile inset (DIN 73411 7/79)

length: 2m
bup to 4 bar
Inner diameter: 25 mm (1 inch)
Thickness of wall: 4,5 mm (0,177 inch)
up to 125°C
Outer layer (EPDM): resistance to oil, ozone and aging through heat
Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Only obtainable in pieces of two meters.

Made in Germany

61,23 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7283

V-belt (W353 / B1000)

Detail

V-belt 10 x 1150 fit to Wartburg 353 and Barkas B1000 to transmit the rotary to the dynamo and to the wather pump shaft.

size: 10 x 1150 mm
new German production

normaly 14,40 € now 9,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3176

Standard V-belt with 1175mm length for the Barkas B1000 with two stroke engine.
The bet connects the V-pully at the crankshaft, the V-pully at the water pump shaft (cylinder head) and the dynamo.
The tautening will be implementing by the retaining plate for dynamo.
V-belt is made by an brand manufacturer in best quality.

Size: 10mm width, 1175mm long
teethed construction
one piece will be needed
made in Germany

additional needed tools:

no special tool needed for mounting

normaly 14,40 € now 9,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6680

V-belt 10 x 1200 (B1000)

Detail

V-belt with 1200mm length for the Barkas B1000 with two stroke engine.
The bet connects the V-pully at the crankshaft, the V-pully at the water pump shaft (cylinder head) and the dynamo.
The tautening will be implementing by the retaining plate for dynamo.
V-belt is made by an brand manufacturer in best quality.

Size: 10mm width, 1200mm long
teethed construction
one piece will be needed
made in Germany

additional needed tools:

no special tool needed for mounting

18,24 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8258

The product category Barkas B 1000 > Spare parts > Engine > Cooling system is spread over 5 sites:

1 2 3 4 5
Show all products

* All prices inclusive VAT and plus shipping costs.