This site in german: Barkas B 1000 > Ersatzteile > Motor > Kühlsystem 
You are here: > Barkas B 1000> Spare parts> Engine> Cooling system

Cooling system

The complete offer in Cooling system

Sealing ring for thermostat

Sealing ring made of black rubber fit thermostat of all Wartburg 353 and Barkas B1000 with 3 cylinder two stroke engine.
{[mad in Germany][one piece will be needed]}
3,85 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7007

Thermostat

Fit to all Wartburg 353 and Barkas with 3 cylinder two stroke engine.
  • incl. sealing ring
  • Thermostat opens by 82°C
  • one piece will be needed
12,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3135

Bolt for thermostat case

Hexagon bolt for the Thermostat manifold fit to all Wartburg 353 and B1000 two stroke engine
  • delivery inclusive washer
  • three pieces will be needed
0,92 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6858

Bolt for dyadic thermostat case

Hexagon bolt for the splitted thermostat housing.
Fit to Barkas B1000 two stroke engines.
  • delivery inclusive washer
  • three pieces will be needed
0,92 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7979

Bolt for pump housing

Hexagon bolt for the water pump case fit to all Wartburg 353 and B1000 two stroke engine
  • delivery inclusive washer
  • six pieces will be needed
0,92 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6859

Bolt for dyadic pump housing

Hexagon bolt for the water pump case fit to Wartburg 353 and B1000 two stroke engines with the splitted water pump housing.
  • delivery inclusive washer
  • six pieces will be needed
0,92 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7978

Seal for thermostat case

Thermostatseal fit to all Wartburg 353 and B1000 two stroke engine
  • material: seal-paper
  • one piece will be needed
2,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3136

Seal for thermostat case top

Thermostatseal fit to the top colling water pipe connection at the Barkas B1000 two stroke engine.
  • material: seal-paper
  • thickness: 1mm
  • made in Germany
  • one piece will be needed
3,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7596

sensor for temperature

Transmitter for temperature indication

thread: M14 x 1,5
width across flats: 19mm
Original-parts-no.: 91 05000 094
23,95 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6554

gasket ring of sensor for temperature

Aluminium ring for the temperature sensor mounted in cylinder head of 2-stroke engine of Wartburg 353 and barkas B1000.
  • outer-diameter: 20 mm
  • inner-diamter: 14 mm
  • thickness: 1,5 mm
Original-parts-no.: 99 00109 450
0,18 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6565

Coolant GLYSANTIN® Protect Plus, frost protection agent

coolant concentrate Protect Plus (G48), suitable for all popular makes of car
quality engine coolant such as Glysantin® Protect Plus provides all-season:
  • Corrosion protection
  • Overheating protection
  • Frost protection
  • Neutrality to rubber and plastics
  • Low foaming tendency
  • High chemical stability

Fit to the most coolant systems, for instance of Wartburg 353 and 1.3, Trabant 1.1 and Barkas B1000(-1).

Mixable with coolant G11 from Volkswagen.
NOT mixable with coolant G12 from Volkswagen!
price 12,24 Euro / liter
12,24 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6716

Bearing ring for water pump shaft

Bearing washer for the water pump inside the cylinder head of the Warturg 353 and Barkas B1000.
Can be used for all types of water pumps without vintage limit.
  • made in Germany
  • delivery as an single part
  • metal, galvaniced
  • one pieces needed
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8204

Sealing for water pump

Speacial seling system for the water pump inside the cylinder head of the Warturg 353 and Barkas B1000.
Can be used for all types of water pumps without vintage limit.
  • made in Europe
  • inclusive rubber seal
  • for Wartburg 353 up to 5-85 will be two pieces needed
  • for Wartburg 353 from to 5-85 and Barkas B1000 will be one piece needed
28,31 €inclusive VAT, plus shipping costs
Delivery in 14 days.

Art.No. 6770

Spare kit for water pump from 5/85

fit to Wartburg 353 (from vintage Mai 1985) and all Barkas B1000 (3 cylinder 2-stroke engine)
complete set consist of:
  • 1x fan wheel
  • 1x membran gasket compl.
  • 2x cover disc for ball bearings
  • 1x gasket for ball bearing (rubber), side of belt pulley
  • 1x distance bush (inner bush)
  • 1x O-ring
  • one set will be needed
250,10 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 3138

Spare kit for water pump from 5/85, low budget

Repairset for the coolung pump as no name product.
fit to Wartburg 353 (from vintage Mai 1985) and all Barkas B1000 (3 cylinder 2-stroke engine)
complete set consist of:
  • 1x fan wheel
  • 1x membran gasket compl.
  • 2x ball bearing
  • 1x distance bush (inner bush)
  • one set will be needed
  • no name, producer unknown
68,20 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8359

fan wheel water pump from 5/85

Waterpump wheel fit to Wartburg 353 (from vintage Mai 1985) and all Barkas B1000 (3 cylinder 2-stroke engine)
  • 1x fan wheel with 2xmetal ring for membran sealing
  • made in Europe
85,29 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7345

Seal for water pump, labyrinth

Some Wartburg and B1000 engines have an splitted pump case.
This Waterpump seal fit to the outer cap, the labyrinth housing.
For the total sealing you need additional still the normal water pump seal
  • material: seal-paper
  • one piece will be needed
4,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7253

Seal for water pump

Waterpump seal to mounting between cylinder head and water pump housing ( fit to
both types single and splitted water pump casing).
Used at all Wartburg 353 and B1000 two stroke engine and integrated water pump at the cylinder head (without vintage limit).
  • material: pressed sealing-paper
  • one piece will be needed
2,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3139

Engine for heater

67,58 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4397

Fan-shaft, long

long fan-shaft with two textile reinforced rubber discs

new produced (not original)

one piece neeeded
48,39 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 4427

Fan-shaft complete

Complete fanshaft consist of:
short and long fan shaft, flexible transmitter disc, sheet-metal profile with ball bearing and plastic fan.

complete set, pre-installed
133,43 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 4426

Grooved ball bearing for Fan-shaft and water pump shaft

FAG grooved ball bearing for shaft of water pump and fan shaft
for Wartburg 353 and B1000 (2-stroke)
  • high quality made by FAG
  • size: 12 x 37 x 12
  • for the water pump shaft of the Wartburg 353 and Barkas B1000: two pieces are needed
  • for the Fan shaft Barkas one piece will be needed
9,44 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6298

Snap ring for grooved ball bearing

Circlip for grooved ball bearing 6301 for shaft of water pump Wartburg 353 and B1000 (2-stroke) without vintage limit.
  • Snap ring for bore
  • one piece will be needed
0,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6537

Fitted key 3 x 3,7

Woodruff key (3 x 3,7).
Can be used for additional fan-shaft Barkas B1000.
And olso for the connection between V-pully and Fan wheel water pump up to 5/85 or fan wheel water pump from 5/85 and (Water pump shaft 42cm up to 5/85 oder Water pump shaft from 6-85).
  • B1000: three pieces needed for complete fan-shaft
  • B1000 / W353: two pieces needed for shaft of waterpump
0,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6304

Rubber spring for radiator

spring suspension for cooling water radiatior
fastening the radiator at the carbody

material: rubber with thread bolt on both ends
three pieces will be needed
14,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4440

compensating reservoir (W353/B1000/M25)

Coolant compensating reservoir with one gland on bottom.

This coolant reservoir is suitable for follow car types:
  • Wartburg 353
  • B1000 (only 2-stroke)
  • Multicar M25

Suitable accessory:
39,21 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6728

Bottle for coolant (W1.3/B1000-1)

Cooling water compensating reservoir fit to Wartburg 1.3 and Barkas B1000-1 (both types with 4-stroke engine).
The bolltels will be reproducted in EU at the genuine tool.
This compensating tank got two hose connections.
1x bottom connector with diameter: 15mm
1x upper connector (ventilation to radiator) with diameter: ca.10mm
Delivery as single part, without cap, ventil and mounting bits.
52,47 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6419

closure for compensating tank

Cap with core thread for coolant fluid bottle of Trabant 1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 and B1000-1, Multicar M24 and M25 with Cunewald engine.
  • delivery as an single part
  • material:plastic
  • new repoduction
  • one piece will be needed
8,82 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6645

Sealing compensating reservoir / blow off valve

Special sealing ring between the blow off valve and coolant compensating reservoir.
This part is an new production made of ur own manufactured tool.
  • material: heater fluid,Glysantin restistant rubber
  • delivery as single part, without any mounting parts
  • one piece will be needed

This sealing fit to coolant reservoir (W353/B1000/M25) and coolant reservoir
as well for
an dem blow off valve 50kPa, blow off valve 100kPa and blow off valve 130kPa
This sealing is suitable for follow car types:
  • Trabant 1.1
  • Wartburg 353
  • Wartburg 1.3
  • B1000 and B1000-1
  • Multicar M25

Suitable accessory:
5,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8474

blow off valve for compensating reservoir, 50kPa (W353/B1000)

Blow off valve for coolant compensating reservoir of Wartburg 353 and 2-stroke version of Barkas B1000.
It will be mounted inside reservoir cap.
  • pressure: 50kPa
  • one piece will be needed
  • made in EU
20,53 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6553

blow off valve for compensating reservoir, 130kPa (W1.3/B1000-1)

Pressure valve for cooling water reservoir of Wartburg 1.3 and 4-stroke version of Barkas (B1000-1).
{[pressure: 130kPa][to mount inside the reservoir cap][one piece will be needed]}
Made in EU
24,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 618

Coolant hose, 15 x 3,5mm (yard goods)

rubber coolant hose with textile inset (DIN 73411 7/79)
  • up to 6 bar
  • Inner diameter: 15 mm (0,59 inch)
  • Thickness of wall: 3,5 mm (0,138 inch)
  • up to 125°C
  • Outer layer (EPDM): resistance to oil, ozone and aging through heat
  • Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Deliverable as yard goods. If order two pieces of this article we will deliver one piece with a length of two Meter.
price 17,92 Euro / meter
17,92 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6936

Coolant hose, 25 x 3,5mm (1 Meter)

rubber coolant hose with textile inset (DIN 73411 issue 1955)
  • working pressure: 3 bar
  • Inner diameter: 25 mm (1 inch)
  • Thickness of wall: 3,5 mm (0,138 inch)
  • Outer and inner layer made of black SBR-rubber quality
  • resistant against hot water with antifreeze admixture from -20°C up to +95°C

Only obtainable in pieces of one Meter.
Inexpensive alternative for coolant hose 25mm x 4,5mm with lower resistance against pressure and temperatureFit to many veteran cars, for instance Wartburg 311price 14,77 Euro / meter
14,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6948

Coolant hose, 25 x 4,5mm (1 Meter)

Cooling wather hose for the connection between thermostat housing cylinder head and upper connector cooling radiator. Used length: 53cm.
Rubber coolant hose with textile inset (DIN 73411 7/79)
  • bup to 6 bar
  • Inner diameter: 25 mm (1 inch)
  • Thickness of wall: 4,5 mm (0,177 inch)
  • up to 125°C
  • Outer layer (EPDM): resistance to oil, ozone and aging through heat
  • Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Only obtainable in pieces of one Meter.
Made in Germany
29,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7282

Coolant hose, 25 x 4,5mm (2 Meter)

Cooling wather hose for the connection between lower connector cooling radiator and water pump housing. Used length: 97,5cm.
Rubber coolant hose with textile inset (DIN 73411 7/79)
  • length: 2m
  • bup to 4 bar
  • Inner diameter: 25 mm (1 inch)
  • Thickness of wall: 4,5 mm (0,177 inch)
  • up to 125°C
  • Outer layer (EPDM): resistance to oil, ozone and aging through heat
  • Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Only obtainable in pieces of two meters.
Made in Germany
55,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7283

V-belt (W353 / B1000)

V-belt 10 x 1150 fit to Wartburg 353 and Barkas B1000 to transmit the rotary to the dynamo and to the wather pump shaft.
  • size: 10 x 1150 mm
  • new German production
Special offer normaly 14,40 € now 9,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3176

V-belt 10 x 1175 (B1000)

Standard V-belt with 1175mm length for the Barkas B1000 with two stroke engine.
The bet connects the V-pully at the crankshaft, the V-pully at the water pump shaft (cylinder head) and the dynamo.
The tautening will be implementing by the retaining plate for dynamo.
V-belt is made by an brand manufacturer in best quality.
  • Size: 10mm width, 1175mm long
  • teethed construction
  • one piece will be needed
  • made in Germany

additional needed tools:
  • no special tool needed for mounting
Special offer normaly 14,40 € now 9,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6680

V-belt 10 x 1200 (B1000)

V-belt with 1200mm length for the Barkas B1000 with two stroke engine.
The bet connects the V-pully at the crankshaft, the V-pully at the water pump shaft (cylinder head) and the dynamo.
The tautening will be implementing by the retaining plate for dynamo.
V-belt is made by an brand manufacturer in best quality.
  • Size: 10mm width, 1200mm long
  • teethed construction
  • one piece will be needed
  • made in Germany

additional needed tools:
  • no special tool needed for mounting
15,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8258

Hose connector 19mm, universal

Universal useable plastic connection tube for coolant hoses.
Best use for reparations of demaged hoses or tuning and modifications z.B. Trabant with Wartburg engine or VW engines.
Easy to install, just push the two ends of the hoses at tube and fix it with two clamps.
technical details:
  • diameter: 19mm
  • lenght of the connection side: 32mm
  • legth total: 75mm
  • material: plastic, temperatur and oel restistant, whithe
3,18 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7432

compensating tank complete, universal

universal useable coolant bottle.
Scope of delivery complete with closure cap and integreated valve and switch for fluid lavel.
Two connections for the water hoses.
diamter connection down: 15mm
diamter connection on top: 8mm
Brillant replacement for the original spare part. Can be used for tuning and modificatios for example: Trabant with Wartburg engine or VW engines
41,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7430

V-belt 13 x 1250 (B1000)

V-belt with 1250mm length for the Barkas B1000 with two stroke engine and 13mm V-pullys.
The bet connects the V-pully at the crankshaft, the V-pully at the water pump shaft (cylinder head) and the dynamo.
The tautening will be implementing by the retaining plate for dynamo.
V-belt is made by an brand manufacturer in best quality.
  • Size: 13mm width, 1250mm long
  • teethed construction
  • one piece will be needed
  • made in Germany

additional needed tools:
  • no special tool needed for mounting
22,18 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8438
The complete offer in Cooling system

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas