Gearbox spare parts, add-on-components and accessories

cam for freewheel for Wartburg gearbox up to vintage: november 1986.
Mounting without woodruff key.

• original spare part
• scope of delivery without cage and torsion spring
• incl. 10 cylindric rolls
• one piece will be needed

cam for freewheel for Wartburg gearbox up to vintage: november 1986.
Mounting without woodruff key.

• made in Europe
• scope of delivery inclusive cage, spring, 10x cylindrical roller
• piece will be needed

cam for freewheel for Wartburg gearbox from vintage: november 1986.
Mounting with woodruff key.

• original spare part
• scope of delivery inclusive cage, torsion spring and 10 cylindric rolls
• one piece will be needed

Rubber sleeve gearbox side for the right and left universal shaft.
Fit for all universal shaft of the Wartburg 353 and Wartburg 312

• material: rubber, black
• two pieces will be needed
• made in Europe
• delivery as an single part without mounting spring and mounting strap

Additional needed mounting parts (not scope of delivery of the rubber boot):
2x Band clamp, long (part.-No.:6408)
2x Spring clamp (part.-No.:8222)
1x High performance grease with molybdenum, tube 100g (Art.-Nr.:6256)

Rubber boot for the outher drive shaft joint of the Wartburg 312 and 353.
It is always one piece assembled form the outer side of the joint and one piece from the inner side.
This oel (Art.-Nr.:6619) have to be used for the lubication of the outer joint.

• material: rubber, black
• made in EU
• delivery as an single part without mounting pats

Additional needed mounting parts (not scope of delivery of the rubber boot):
2x Band clamp, long (part.-No.:6408)
2x Clamp (part.-No.:7608)
additional needed tools for dismounting and mounting (not part of this offer):
1x Seeger ring pliers, external retaining rings 19-60mm (LDM-part.-Nr.:8322)

One kit of rubber boots and assambly parts for the outher drive shaft joint of the Wartburg 312, 353 and 1,3.
It is always one piece assembled form the outer side of the joint and one piece from the inner side.
Scope of delivery:
2x Rubber boot wheel side (LDM-Art.-Nr.:3147)
1x oel for the lubication of the outer joint (LDM-Art.-Nr.:6620)
2x Band clamp, long (LDM-part.-No.:6408)
2x Clamp (LDM-part.-No.:6780)

• one kit will be needed for each drive shaft (total: 2 set)

additional needed tools for dismounting and mounting (not part of this offer):
1x Seeger ring pliers, external retaining rings 19-60mm (LDM-part.-Nr.:8322)

Circlip for mounting at the Wartburg 353 and Wartburg 1,3 drive shaft boot.
Can be used at the inner sleeve of the outside joint.

• Two piece will be needed for each car

Needed plier for dismounting and mounting (not part of this offer):
1x Seeger ring pliers, external retaining rings 19-60mm (LDM-part.-Nr.:8322)

One kit of rubber boot and assambly parts for the universal shaft gearbox side.
Fit for all universal shaft of the Wartburg 353 and Wartburg 312 right and left hand.
Scope ofe delivery:
1x Sleeve rubber set gear box side
2x Band clamp, long (part.-No.:6408)
2x Spring clamp (part.-No.:8222)
1x High performance grease with molybdenum, tube 100g (Art.-Nr.:6256)

• one set will be needed for each drive shaft

Spring clamp for mounting the rubber sleeve gearbox side at the drive shaft.
Fit for the right and left car side at all types of Wartburg 353 and Wartburg 312.
This part is an new reproduction made in Germany. Best replacement for the original one.
Made of stainless steel.
Simply to assamble also by mounted driveshaft.

• material: spring steel, VA
• two pieces will be needed
• made in Germany
• delivery as an single part
• fit for Rubber boot gearbox side (Part.-No.:3147)

Rebound strap set for mounting of sleeve rubbers of universal shafts
consist of:

• long band clamp (for example for mounting of sleeve rubber on shaft joint), for diameter from 40mm up to 110mm
• short band clamp to seal sleeve rubber on universal shaft, for diameter from 25mm up to 50mm

application:

• the band clamp have to bent around the sleeve rubber by hand, so that it clinging to the sleeve rubber in best way
• fixing this position by hooking into
• spanning the band clamp with a pincers
• ready

Rebound strap for mounting of sleeve rubbers of universal shafts
long band clamp (for example for mounting of sleeve rubber on shaft joint), for diameter from 40mm up to 110mm
application:

• the band clamp have to bent around the sleeve rubber by hand, so that it clinging to the sleeve rubber in best way
• fixing this position by hooking into
• spanning the band clamp with a pincers
• ready