cooling system

Coolant compensating reservoir with one gland on bottom.

This coolant reservoir is suitable for follow car types:

• Wartburg 353
• B1000 (only 2-stroke)
• Multicar M25

Suitable accessory:

• blow off valve 50kPa
• closure

Cooling water compensating reservoir fit to Wartburg 353 all types with front radiator (from vintage 6-1985).
The bolltels will be reproducted in EU at the genuine tool.
This compensating tank got two hose connections.
1x bottom connector with diameter: 15mm
1x upper connector (ventilation to radiator) with diameter: ca.10mm
Delivery as single part, without cap, ventil and mounting bits.

Blow off valve for coolant compensating reservoir of Wartburg 353 and 2-stroke version of Barkas B1000.
It will be mounted inside reservoir cap.

• pressure: 50kPa
• one piece will be needed
• made in EU

Special sealing ring between the blow off valve and coolant compensating reservoir.
This part is an new production made of ur own manufactured tool.

• material: heater fluid,Glysantin restistant rubber
• delivery as single part, without any mounting parts
• one piece will be needed

This sealing fit to coolant reservoir (W353/B1000/M25) and coolant reservoir
as well for
an dem blow off valve 50kPa, blow off valve 100kPa and blow off valve 130kPa
This sealing is suitable for follow car types:

• Trabant 1.1
• Wartburg 353
• Wartburg 1.3
• B1000 and B1000-1
• Multicar M25

Suitable accessory:

• blow off valve 50kPa
• blow off valve 100kPa
• blow off valve 130kPa
• closure

Cap with core thread for coolant fluid bottle of Trabant 1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 and B1000-1, Multicar M24 and M25 with Cunewald engine.

• delivery as an single part
• material:plastic
• new repoduction
• one piece will be needed

rubber coolant hose with textile inset (DIN 73411 7/79)

• up to 6 bar
• Inner diameter: 15 mm (0,59 inch)
• Thickness of wall: 3,5 mm (0,138 inch)
• up to 125°C
• Outer layer (EPDM): resistance to oil, ozone and aging through heat
• Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Deliverable as yard goods. If order two pieces of this article we will deliver one piece with a length of two Meter.

Rubber coolant hose with textile inset (DIN 73411 7/79)

• bup to 6 bar
• Inner diameter: 25 mm (1 inch)
• Thickness of wall: 4,5 mm (0,177 inch)
• up to 125°C
• Outer layer (EPDM): resistance to oil, ozone and aging through heat
• Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Only obtainable in pieces of one Meter.

rubber coolant hose with textile inset (DIN 73411 issue 1955)

• working pressure: 3 bar
• Inner diameter: 25 mm (1 inch)
• Thickness of wall: 3,5 mm (0,138 inch)
• Outer and inner layer made of black SBR-rubber quality
• resistant against hot water with antifreeze admixture from -20°C up to +95°C

Only obtainable in pieces of one Meter.