Spare parts for front wheel brake Wartburg 353

The complete offer in Spare parts for front wheel brake Wartburg 353

Brake hose front, drum brake W353

Flexible brake hose fit only to Wartburg 353 (older models) with brake drum system at the front and rear axle.
This brake hoses are made from actually production in best quality.

delivery as single part, without mounting parts
two pieces will be needed

14,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7123

connection brake line

Detail

brake line to connect both wheel brake cylinders inside of brake drum of front axle Barkas B1000
usable for each side (rigth/left)

Delivery as one piece NiCU material with mounted connection nuts
made in Germany
two pieces will be needed

9,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6456

Bleeder screw, front

Detail

fit to front wheel brake cylinder Trabant 500,600,601 and wartburg 353 (older model with drum brake system at the fron axle).

galvaniced
one piece for each wheel side (front-brake) will be needed
the screw have to be fixed always at the upper wheel barke cylinder

3,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 213

Bleeder screw cap

Detail

fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.

material: rubber
made in Germany

0,65 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 215

paste for brake cylinders Detail special lubricants paste for brake cylinders no problems with brake fluid and rubber sleevs commended for new wheel brake cylinders
price 96,39 Euro / kg	17,35 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6204

Brake drum ( single part ), 50mm Detail The brake drum fit only for Wartburg 353 (older model) with brake drum system at the fron axle. technical details: for brake shoewide is 50mm for brake drum diameter: 230mm bolt circle 4 x 160mm Reproduction made in Europe for each car 2 or 4 pieces will be needed
67,56 €inclusive VAT, plus shipping costs temporary not available Art.No. 3074

One set of brake shoes complete, with lining inclusive four pieces.
wide: 50mm
for brake drums with inner diameter of 230 mm.

fit to Wartburg 353 with brake drum at the front axle, to old version of rear axle and trailer with brake shoe wide of 50mm
One set will be needed.

84,97 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7671

Brake shoe complete, with lining 50mm, single part

Detail

brake shoe complete, with lining
wide: 50mm
for brake drums with inner diameter of 230 mm.

fit to Wartburg 353 with brake drum at the front axle, to old version of rear axle and trailer with brake shoe wide of 50mm

for one wheel side 2 pieces will be needed

32,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 3073

Holder single part steel

Detail

Spring bearing for the brake shoe holder can be used for Trabant 500- 601 front brake, Wartburg 353 and Wartburg 1,3.

material: steel
priece for each piece
two pieces will be needed for each brake shoe
delivery as an single part

3,83 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7098

Pressure spring for brake shoes

Detail

Spring to fix the break shoes at the brake base plate.
fit to follow brake systems:

4 pieces for brake drum front axle Wartburg 353
4 pieces for brake drum rear axle W353 and 1.3
4 pieces for brake drum front axle B1000 and B1000-1
4 pieces for brake drum rear axle B1000, B1000-1
2 pieces for trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9)
delivery as an single part
made in Germany

2,83 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8195

Holder for brake shoe, complete set

Detail

Retainer kit for break shoes to fix the 30mm and 50mm brake shoes at the brake base plate.
fit to follow brake systems:

4 set for brake drum front axle Wartburg 353
4 set for brake drum rear axle W353 and 1.3
2 sets for trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9)

12,88 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8316

Pressure spring spline end for brake shoes

Detail

Spring for the automatic adjuster of the break shoes at the brake base plate.
This spring press the look plate that the sliding element can work only in one direction.
fit to follow brake systems:

4 pieces for brake drum front axle Wartburg 353
4 pieces for brake drum rear axle W353 and 1.3
2 pieces for trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9)
delivery as an single part
made in Germany

additional needed tools for deassembly / assembly:

no special tools will be needed

2,30 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8260

release spring for brake shoes, long

Detail

long version of release spring for break shoes
fit to follow brake systems:

brake drum front axle Wartburg 353 (two pieces for each wheel side)
brake drum rear axle W353 (one piece for each wheel side)
brake drum front axle B1000 (two pieces for each wheel side)
brake drum rear axle B1000 (one piece for each wheel side)
trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9): one piece for each wheel side

3,18 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6454

Sealing ring front brake hose W353 / W1.3

Detail

Sealing for the connection between brake hose and brake suddle of Wartburg 353 and Wartburg 1,3.

four pieces will be needed

0,30 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7687

Brake hose, front 303mm W353 / W1.3

Detail

Brake hose as new production in best quality.
Can be used for the disc brake system Wartburg 353 and 1.3 front axle.
Each brake suddle has got four brake pistons. Inside only the two pistons are working in opposite directions are connected by an fluid channel. Because of that for each suddle are two brake hoses are needed.

brake hose: 303 mm lenght
Connection: 1x M10x1 external thread (male) and 1x M10x1 internal thread (female)
Reproduction high quality
for all Wartburg from type 353W and all Wartburg 1,3 types

needed quantum:

Wartburg 353: total 4 pieces (A and B circular)
Wartburg 1,3: total 2 pieces (B-circular)
the second Wartburg 1,3 brake hose has got the length of 350mm (A-cirular)

additional needed parts (not scope of delivery):

12,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3095

Brake disk set Wartburg

Detail

One kit of brake disks fit to Wartburg 353 und Wartburg 1,3.
technical details:
brakedisc Ø 238 mm
highness 69,8 mm
brake disc type: full (without ventilation)
brakedisk thickness: 11,0 mm
minimum thickness: 9,5mm
centrical diameter: 92,0mm

mounting place: front axle
scope of delivery: two pieces
made in EU
one set will be needed

priece 54,27 Euro / piece

108,54 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7504

Brake disk, singel part

Detail

Brake disk fit to Wartburg 353 und Wartburg 1,3.
technical details:
brakedisc Ø 238 mm
highness 69,8 mm
brake disc type: full (without ventilation)
brakedisk thickness: 11,0 mm
minimum thickness: 9,5mm
centrical diameter: 92,0mm

mounting place: front axle
made in EU
two pieces will be needed

64,26 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3080

Bolt for brake disk

Detail

High tensile prestressed hexagon bolt for mounting the brake disk of the Wartburg 353 and 1,3 at the wheel carrier.

dimension: M8 x 20
strength class: 10.9
surface: galvaniced, silver
10 pieces will be needed
made in Germany

0,89 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6991

Brake caliper, single part, left side

Detail

Overhaul part, please send this part in advance to our company for refresh.

165,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6725

Brake caliper, single part, right side (W353/W1.3/S105/S120)

Detail

Wartburg has got at the front axle a 4-piston caliper (fixed suddle)

The caliper right side is complete remanufactured:

new sealed joint face of both caliper case halves and mounted with new high-tension bolts
surface electrogalvanized with olic draped colour
four new pistons with new sealing rings and dust caps
new bleed screws with rubber caps

Delivery as single part without attachments (Cotter pin for brake lining (5x80), Spring clamp for brake lining and brake lining have to ordered additional).

For more informations to this exchange part please use the Detail button.

Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.

165,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6726

Brake caliper, left-hand, complete

Detail

Wartburg has got at the front axle a 4-piston brake suddle (fixed suddle)
This caliper is suitable for follow vehicles:

Wartburg 353 (only with disc brake at front axle)
Wartburg 1.3
Skoda 130
Skoda Rapid (120G, 130G, 135G)

Brake caliper left side is complete remanufactured (details see brake caliper, component part).
scope of delivery:

The spare part we can only deliver in exchange. The worned out part (overhaulable IFA original part)have to be send to our company in advance.

Old caliper (worned out) have to be shiped in advance!

185,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3075

Brake caliper, complete, right-hand

Detail

Wartburg has got at the front axle a 4-piston brake caliper (fixed suddle)
This caliper is suitable for follow vehicles:

Wartburg 353 (only with disc brake at front axle)
Wartburg 1.3
Skoda 130
Skoda Rapid (120G, 130G, 135G)

Right-hand brake caliper is complete remanufactured (details see brake caliper, component part).

Scope of delivery:

The spare part we can only deliver in exchange. The worned out part (overhaulable IFA original part)have to be send to our company in advance.

Old caliper (worned out) have to be shiped in advance!

185,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3076

Brake lining kit for disc brake

Detail

One set of brake linings reproducted made by Europeen company.
Complete set of disk brake lining consist of 4 pices.
Fit to vehicles Wartburg 353, Wartburg 1.3, Skoda 105 und Skoda 120 with four-piston brake caliper.

delivery without mounting parts
made in EU

20,56 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3081

Brake lining kit for disc brake, Bosch

Detail

One set of brake linings with good quality made by Bosch.
Complete set of disk brake lining consist of 4 pices.
Fit to vehicles Wartburg 353, Wartburg 1.3, Skoda 105 und Skoda 120 with four-piston brake caliper.

delivery without mounting parts
made by Bosch

27,76 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7736

Brake lining kit for disc brake, Ferodo

Detail

One set of brake linings with high quality made by Ferodo.
Complete set of disk brake lining consist of 4 pices.
Fit to vehicles Wartburg 353, Wartburg 1.3, Skoda 105 and Skoda 120 with four-piston brake caliper.

delivery without mounting parts
made by Ferodo

36,89 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7737

Spring clamp for brake lining, stainless steel

Detail

Brake pad clamp fit to the front disk brake system of Wartburg 353, Wartburg 1.3, Skoda 105 and Skoda 120.
This part is an high quality reproduction made in Germany.
The spring wire is made of secial stainless steel to give your Old or Youngtimer the best technical and optical performance.

Spring wire: stainless steel (VA)
made in Germany
For each Brake suddle one pice will be needed (total 2 pieces)

4,98 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3082

Cotter pin for brake lining Detail Splitted pin for disk brake lining. For each brake suddle two pieces will be needed (4 pieces total). Fit to Wartburg 353, Wartburg 1.3, Skoda 105 und Skoda 120.
0,48 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 3083

Bleeder screw brake suddle front, 33mm

Detail

Bleeder screw longer as the original length. Fit to Brake suddle left hand and Brake suddle right hand Wartburg 353 and Wartburg 1,3.
3 pieces will be needed for each brake suddle.

spanner gap: SW 8
thread: M8 X 1,25
length total: 33mm
at all 6 pieces will be needed
surface: galvaniced
delivery without rubber protection cap

2,45 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8197

Bleeder screw brake suddle front, 26mm

Detail

Bleeder screw in original length. Fit to Brake suddle left hand and Brake suddle right hand Wartburg 353 and Wartburg 1,3.
3 pieces will be needed for each brake suddle.

spanner gap: SW 8
thread: M8 X 1,25
length total: 26mm
at all 6 pieces will be needed
surface: galvaniced
delivery without rubber protection cap

3,10 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8196

screw for Steering brake suddle

Detail

hexagon head screw M12 x 1,5 x 30 for mountig brake suddle right hand or brake suddle left hand at knuckle
fit to Wartburg 353 and Wartburg 1.3

surface zinc coated and gold passivated
tensile strength: 10.9
you will need 2 pieces for one brake suddle.

1,98 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6320

Repair-set for brake caliper PLUS (W353/W1.3/S130/Rapid)

Detail

Complete set for repairing the brake caliper of Wartburg 353/1.3 and Skoda S120 und Rapid (120G, 130G, 135G), too.
All parts in outstanding quality.

Inhalt:

4x sealing ring for piston
4x dust protection cap
3x cap for bleeder screw
4x brake piston
sealing ring for caliper conduit
1x spring clamp for brake lining
4x cotter pin for brake lining
3x bleeder screw
4x mounting bolt

2 pieces needed for complete front axle

92,32 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6938

Repair-set for brake caliper (W353/W1.3/S130/Rapid)

Detail

Repair-set for the four piston brake suddle of the Wartburg 353/1.3 and Skoda S105 and S120, too.
All parts in reproducted in best quality.

contens:

4x sealing ring for piston
4x dust protection cap
3x cap for bleeder screw

Two pieces will be needed for the complete front brake (disc brake caliper).

28,70 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6723

Protective cap for brake-suddle pistion

Detail

Dust sleeve for the singe part of the brake piston.
Four pieces will be needed for one brake caliper.
Made by an special manufacture to save the best quality.

suitable for brake caliper of follow car types:

Wartburg 353
Wartburg 1.3
Skoda 105
Skoda 120
useable for brake piston diameter: 34mm
for each brake caliper four pieces will be needed

9,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3077

Sealing ring for brake-suddle pistion ( incl.8 pices )

Detail

Sealing ring set for all 8 brake pistons of the vehicle.
One set will be needed.
Made by an special manufacture to save the best quality.
Fit for brake caliper of follow car types:

Wartburg 353
Wartburg 1.3
Skoda 105
Skoda 120

16,70 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3078

Piston for caliper (W353/W1.3/S130/Rapid)

Detail

One piston fit to caliper of Wartburg 353 (only with disc brake system at front axle) and for Wartburg 1.3 (all variants) and Skoda S130 / Rapid.

High quality reporduction. Surface like original chrom plated
diameter brake piston: 34mm
Four pieces will be needed for one caliper.

24,81 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6828

Sealing ring for caliper conduit, 2 pieces (W353/W1.3/S130/Rapid)

Detail

One pair of sealing rings fit to connection conduits between caliper halves.
Fit to the vehicles: Wartburg W353 and W1.3 and Skoda S130/Rapid)

high quality
material: brake fliud resistant rubber
contens: 1 Paar (2 pieces)
set is needed for each brake suddle

6,60 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6827

Bolt for caliper (W353/W1.3/S130/Rapid)

Detail

One connecting bolt fit to caliper of Wartburg 353 (only with disc brake system at front axle) and for Wartburg 1.3 (all variants)
high grade bolt: 12.9
Surface: zink coated

Four pieces will be needed for one caliper.

2,51 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6829

Wheel brake cylinder and spare parts

Weel-brake cylinder original, front, left hand

Detail

Overhauled wheel brake cylinder right hand fit only to Wartburg 353 (older models) with brake drum system at the front axle.
Complete in Germany refreshed spare part. All ruubers are reproducted by the original tools and company in best quality.
The wheel brake case is spaecial made for each wheel side. Please note: this part fit only to the left car side (driver side).
{[fit to all Wartburg 353 models with brake drum system at the front axle][two pieces will be needed for each wheel side][delivery without bleeder screw][overhauled in Germany]}

Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.

76,87 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 8180

Weel-brake cylinder original, front, right hand

Detail

Overhauled wheel brake cylinder right hand fit only to Wartburg 353 (older models) with brake drum system at the front axle.
Complete in Germany refreshed spare part. All ruubers are reproducted by the original tools and company.
The wheel brake case is spaecial made for each wheel side. Please note: this part fit only to the right car side (co driver side).
{[fit to all Wartburg 353 models with brake drum system at the front axle][two pieces will be needed for each wheel side][delivery without bleeder screw][overhauled in Germany]}

Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.

76,87 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 8179

Dust cap original for front wheel brake cylinder

Detail

Now we are able to offer you sleeves for the repair of the wheelbrake cylinder front left hand or wheelbrake cylinder front right hand of the Wartburg 353 with drum brake system at the front axle and some types of Wartburg 312.
This is the best alternative to the poor Eu sleeves.
The selaing caps are new made at the orignal tools (original producer).

delivery as an single part
for each wheelbrake side (two wheelbrake cylinders) two pieces will be needed
total 4 pieces will be needed
for brake diameter: 25,4 mm (1 Zoll)
made in Germany
the sealing ring fit to the left and the right brake cylinders

The sleeves should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder should be changed.

8,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8185

Ring sleeve original for front wheel brake cylinder

Detail

Now we are able to offer you sleeves for the repair of the wheelbrake cylinder front left hand or wheelbrake cylinder front right hand of the Wartburg 353 with drum brake system at the front axle and some types of Wartburg 312.
This is the best alternative to the poor Eu sleeves.
The selaing rubbers are new made at the orignal tools (original producer).

delivery as an single part
for each wheelbrake side (two wheelbrake cylinders) two pieces will be needed
total 4 pieces will be needed
for brake diameter: 25,4 mm (1 Zoll)
made in Germany
the sealing ring fit to the left and the right brake cylinders

The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder should be changed.

8,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8184

Sleeve set original for front wheel brake cylinder

Detail

Now we are able to offer you sleeves for the repair of the wheelbrake cylinder front left hand or wheelbrake cylinder front right hand of the Wartburg 353 with drum brake system at the front axle and some types of Wartburg 312.
This is the best alternative to the poor Eu sleeve sets.
All rubber parts are new made at the orignal tools (original producer).
The set consist of:

2 pieces of ring sleeves
2 pieces of dust caps
for each wheelbrake side (two wheelbrake cylinders) one set will be needed
total 2 sets will be needed
for brake diameter: 25,4 mm (1 Zoll)
made in Germany
the kit fit to the left and the right brake cylinders

The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder should be changed.

19,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8183

1+1

Weel-brake cylinder, complete, front, left hand , W353

Detail

The wheel brake cylinder left hand fit only to Wartburg 353 (older models) with brake drum system at the front axle. New producted spare part made in Europe.
The wheel brake case is spaecial made for each wheel side. Please note: this part fit only to the left car side (driver side).
{[fit to all Wartburg 353 models with brake drum system at the front axle][two pieces will be needed for each wheel side][delivery without bleeder screw][Repro part made in EU]}

35,78 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 3071

Weel-brake cylinder, complete, front, right hand

Detail

The wheel brake cylinder right hand fit only to Wartburg 353 (older models) with brake drum system at the front axle. New producted spare part made in Europe.
The wheel brake case is spaecial made for each wheel side. Please note: this part fit only to the right car side (co driver side).
{[fit to all Wartburg 353 models with brake drum system at the front axle][two pieces will be needed for each wheel side][delivery without bleeder screw][Repro part made in EU]}

35,78 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 3070

Ring sleeve for wheel brake cylinder

Detail

blow-out patch for wheel brake cylinder left hand or wheel brake cylinder right handfront axle
fit only to Wartburg 353 with brake drum system at the front axle.
scope of delivery:

complete set incl. 4 pieces
one set will be needed

10,33 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 3072

Universal brake line, CUNIFER 5m, 4,75x0,7 Detail Brakepipeline made of NiCuFe material. Size 4,75 x 0,7 mm with length of 5m Fit for many cars also for Trabant, Wartburg
priece 5,45 Euro / meter	37,01 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6177

Universal brake line made of steel, PVC-coated 5m, 4,75x0,7 Detail Brakepipeline made of steel and plastic coated. One set constists of 6mm x 0,7mm 5m long for Trabant, Wartburg, Volkswagen
price 3,05 Euro / meter	15,25 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 262

Universal brake line, PVC-coated in 1 m pices max.5m, 6x0,7 Detail Brakepipeline made of steel and plastic coated. Dimensions: 6mm x 0,7mm maximum 5m long. Fit to Trabant, Wartburg, Volkswagen. Price per meter.
Price: 6,50 Euro / Meter	6,50 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 263

Screw-cap for brakeline 4,75x0,7 Wartburg and VW

Detail

Brake pipe screw for breakline with flanged type E.
Can be used for all brake lines made of steel or nickel-cooper alloy with outside diameter 4,75mm.

fit to Wartburg 353, Wartburg 1,3 and Opel (Vauxhall)
thread: M10x1,0
spanner gap: M10
useable for brake pipes: 4,75x0,7mm

0,89 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6378

Look plate for steering knuckle leaver

Detail

Look plate for hexagon bolt steering knuckle leaver.
Right and left hand mountable.
fit to Wartburg 353 and Wartburg 1.3

sheet matal, *bone style*
made in Germany
you will need 2 pieces at all

2,54 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7239

screw for Steering knuckle leaver

Detail

hexagon head screw M10 x 45
fit to Wartburg 353 and Wartburg 1.3

tensile strength: 10.9
made in Germany
you will need 2 pieces for one steering knuckle leaver

1,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6319

Spare parts for PAL-caliper

Brake hose retainer, original style

Detail

sacer spring for connection between flexible brake hose and brake pipe

surface bronzing
one piece for each screw joint will be needed

2,10 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 240

Brake hose retainer

Detail

sacer spring for connection between flexible brake hose and brake pipe
not the same design like the originale one (made for VW). This retainer can be also used for Trabant and Wartburg.

electrogalvanized, black
high quality made in Germany, spring metal
one piece for each screw joint will be needed

2,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6624

Brake pipe spanner 10-11mm angled Detail Special tool for mounting or demounting of screw-cap for brakelines. type: level angleded Fit to brake screws SW10 and SW11.
12,47 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7702

Brake-cleaner XXL 850ml

Detail

quick-cleaner for brake and clutch parts

FCKW, aceton free
volume: 850 ml
delivery as an single spray

price 5,29 Euro / liter

4,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7898

brake-cleaner 600ml

Detail

quick-cleaner for brake and clutch parts

FCKW free
volume: 600 ml
type: AD
delivery as an single spray

price 7,62 Euro / liter

4,57 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6252

Brake pipe spanner 12-13mm, straight Detail Special tool for mounting or demounting of screw-cap for brakelines. type: sraight Fit to brake screws SW12 and SW13.
12,43 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7992

Brake pipe spanner 10-11mm, straight Detail Special tool for mounting or demounting of screw-cap for brakelines. type: sraight Fit to brake screws SW10 and SW11.
9,86 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7703

Brake-cleaner, one packing unit, 12x Sprayer 600ml

Detail

Complete packing unit quick-cleaner for brake and clutch parts

FCKW free
content: 12x sprayer with volume of 600 ml

That implies a price of a single sprayer of 3,90 €price 6,50 Euro / liter

46,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7033

Bleeder screw cap with tongue

Detail

Rubber cap with additional tongue fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.
The flap kibosh loosing the complete cap.

material: brake fluid resistant rubber
made in EU

1,68 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8446

The complete offer in Spare parts for front wheel brake Wartburg 353

* All prices inclusive VAT and plus shipping costs.