Home
Impressum
Terms of business
Basket
You are here: >
Wartburg 1.3
>
Spare parts
>
Front axle
Shop
IFA engine
pistons
IFA-vehicles
Framo
P70 / F8 / F9
W50/L60
Trabant 500/600
Wartburg 311 / 312 / 313
Multicar M22
Multicar M24
Multicar M25
Multicar M26
Multicar M27
Trabant 601
Spare parts
Tuning parts
complete cars
Trabant 1.1
Spare parts
Tuning parts
Wartburg 353
Spare parts
Tuning parts
Wartburg 1.3
Spare parts
Exhaust system
Brakes
Brake line
Front brake
Rear brake
Electrical system
Lighting
Engine
cooling system
clutch system
ignition system
Cylinder head
Fuel sytem
gear box
Front axle
rear axle
car body
rubber sections
Accessories
valve caps
Tuning parts
Roll bar
Suspension
valve caps
Barkas B 1000
Spare parts
Ball joints, accessories
Boots for ball joints
Skoda
Trailer
Bastei-camper
Camptourist / Klappfix
Intercamp / Oase
Qek-camper
Special made
Bulbs
12Volt
6Volt
24 Volt
connecting wire and accessory
bicolored car wires
Single colour wire
manufactured wires
workshop requirement
hose clips
tools
Lubricants
Mounting parts
fuel tank coating
Protection equipment
Varnish and paint
Accessory
Corrosion protection
adhesive bonded joint
Bowden cable
Carburetor jets
care products
Antifriction bearing
Grooved ball bearing
Cylindrical roller bearing
oils
Special items
Service
privacy policy
Terms of business
Used Oil disposal
Taking back of batterys
Downloads
shipping costs
Favorite links
Impressum
Produktindex
Search
Basket
Front axle
The complete offer in Front axle
Sleeve for ball joint
Detail
replacement sleeve for ball joint. Fit to Trabant601, Trabant 1,1 and Wartburg 353 and 1,3.
It is only recommendable if ball joint is without any slackness
2,60 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 938
Look plate ball joint for trak rod
Detail
Look plate to secure the mounting connetion between ball joint and track rod.
Fit to Wartburg 353 and 1,3
total two pieces will be needed
made in Germany
Please use the button detais for the exploded view and find the right spare part.
2,95 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7240
Ball joint for trak rod, complete
Detail
The ball joint fit to Wartburg 353 and 1,3
Reproduction, made in EU.
two pieces will be needed
made in Europe
Please use the button detais for the exploded view and find the right spare part.
17,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 3300
Driver for steering column
Detail
Steel driver for fabric joint for the connection of the steering column of the 353 und Wartburg 1.3 to the Steering column assembley.
sheet metal, galvaniced
two pieces will be needed for each car
made in Germany
Please use the button detais for the exploded view and find the right spare part.
Parts-No.: 53 01304 702
4,20 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7244
Fabric washer, steering column
Detail
Rubber joint for the connection of the steering column of the 353 und Wartburg 1.3 to the Steering column assembley.
delivery inclusive 8 pieces of tubular rivet to reinforce the hole
one piece will be needed for each car
made in EU
Please use the button detais for the exploded view and find the right spare part.
Parts-No.: 53 08002 900
17,49 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7068
Bearing for steering column
Detail
Bearing bush for steering column
made of plastic
fit to all chassis variants of Wartburg 353 and Wartburg 1,3
Parts-No.: 53 01308 618
3,28 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 7059
Silent buffer bush for wishbone
Detail
Silentbuffer bush fit to all chassis arms of Wartburg 353 and Wartburg 1,3 with the eye diameter 26mm.
upper wishbone, front axle - 2 pieces for each wishbone
lower wishbone, front axle - 2 pieces for each wishbone
wishbone, rear axle - 2 pieces for each wishbone
summary:
front axle: in all 8 pieces
rear axle: in all 4 pieces
11,05 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 6372
Silent buffer bush for upper wishbone W1,3
Detail
One set silentbuffer bush fit to the upper chassis arms of Wartburg 1,3.
delivery: two pieces
for each wishbone one set will be needed
39,67 €
inclusive VAT, plus shipping costs
Art.No. 6774
Delivery only at advance payment.
Metal bushing for buffer bearing bush of wishbone
Detail
Metall bushing to use in tandem with
rubber for buffer bearing bush
Fit to all chassis arms of Wartburg 353 (new type of bearing bush)
Also fit to older types of bearing bushes if carry on using outer metal bushing of that.
best quality, made in Germany
upper wishbone, front axle - 2 pieces for each wishbone
lower wishbone, front axle - 2 pieces for each wishbone
wishbone, rear axle - 2 pieces for each wishbone
summary:
front axle: in all 8 pieces
rear axle: in all 4 pieces
5,96 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6813
Rubber for buffer bearing bush of wishbone
Detail
Rubber bushing to use in tandem with
metal bushing for buffer bearing bush
Fit to all chassis arms of Wartburg 353 (new type of bearing bush)
Also fit to older types of bearing bushes if carry on using outer metal bushing of that.
upper wishbone, front axle - 2 pieces for each wishbone
lower wishbone, front axle - 2 pieces for each wishbone
wishbone, rear axle - 2 pieces for each wishbone
summary:
front axle: in all 8 pieces
rear axle: in all 4 pieces
6,82 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6812
Mounting nut for ball joint
Detail
Nut for the connection ball joint for the other wishbone and and the swivel bearing. Fit to all Wartburg 312, 353 und 1,3 models. The nut can be used for the upper and the bottom wishbone.
delivery inclusive spring washer
four pieces will be needed
2,23 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7716
Ball joint for wishbone
Detail
Connection ball joint as a single part for repairing of the front axle (other wishbone and and the swivel bearing).
Fit to all Wartburg 312, 353 und 1,3 models. The joint is mounted at the upper and the bottom wishbone.
This part is an high quality reproduction made in Europe.
fit to Wartburg 312, 353 and 1.3 modells like Limousine, Tourist, Camping and Trans
delivery inclusive sealing cap
for each wheel side two pieces will be needed, total four pieces for each car
10x Mounting screw for ball joint (Art.-Nr.:7774)
2x Mounting nut for ball joint (Art.-Nr.:7716)
2x Locking plate for ball joint for wishbone (Art.-Nr.:7003)
26,52 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 3302
Mounting screw for ball joint
Detail
Hexagon bolt for the connection ball joint and upper and lower wishbone, front axle left and right hand.
Fit to all Wartburg 312, 353 und 1,3 models. The nut can be used for the upper and the bottom wishbone.
material grade: 10.9
delivery inclusive spring washer
10 pieces will be needed
1,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7774
sleeve for ball joint of wishbone
Detail
Replacement sleeve for ball joint of wishbones fit to all types of Wartburg 353 and 1.3.
Please note: only use for Reproducted ball joints. Does not for for originale ones!!!
one piece needed for each ball joint (2 pieces for each front axle side)
material: rubber
made in EU
5,12 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6371
Locking plate for ball joint for wishbone
Detail
Locking plate for both outer mounting screws of ball joint for the other wishbone and and the swivel bearing. fit to all Wartburg 312, 353 und 1,3 models.
The joint is mounted at the upper and the bottom wishbone.
for each ball joint one piece will be needed
4,55 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7003
1+2
Protaction cap for Steering rack (W353 / W1.3)
Detail
Dust sealing for the gear rack at the Wartburg steering case.
material: rubber, black
one pieces will be needed
made in EU
4,82 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7867
Steering rack gaiter (W353 from Jan.87 / W1.3)
Detail
This gaiter for steering fits to Wartburg 353 (from January 1987 onwards) and all kind of Wartburg 1,3.
delivery without mounting parts
reproduction made in EU
two pieces will be needed
16,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7023
Wheel bearing 6009 C2
Detail
Outher ball bearing for the front and rear axle of Wartburg 353 und Wartburg 1,3
one piece needed for each wheel (four at all)
wheel beraing type: 6009 C2
made in Germany
26,39 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 3320
wheel bearing Wartburg, 6307 C2
Detail
Outher ball bearing for the Wartburg 353 und Wartburg 1,3.
Fit to the front and rear axle of all types.
one piece needed for each wheel(four at all)
wheel bearing type: 6307 C2
made in Germany
28,07 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 3325
Shim washer (rubber)
Detail
Shim rubber made of rubber. Mounting between outer ring of
inner wheel bearing
and bearing case.
Fit to the front and rear axle of Wartburg 353 and 1.3
New production made of our own mouldings
material: rubber, black
total 4 pieces will be needed
Parts-No. 53 01201 503
8,68 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7008
Wheel bearing set
Detail
Wheel bearing set for the front and rear axle of the Wartburg 353 and 1,3.
Set consist of:
1x deep groove ball bearing:6009 C2
1x deep groove ball bearing:6307 C2
1x sealing ring
all components are made by german producers
for each car total 4 sets will be needed
58,36 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7242
Bolt for wheel bearing housing
Detail
Screw for mounting the wheel bearing case at the steering front axle left or right hand
W312, 353, 1,3
Hexagon socket-head screw like original made with strength class 10.9
Hexagon bolt
strength grade 10.9
surface galvaniced
delivery as an single part
fit for the front axle of Wartburg 312, 353 and 1.3
8 pieces will be needed
2,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8219
Radial sealing 55 x 75 x 10 SL
Detail
Sealing with additional dust lip to protect the sealing lip to protect the wheel bearings at the front and rear axle.
This radial seal will be mounted at the outside of the wheel bearing housing (wheel side / wheel hub side)
material: NBR black
made in Germany
for the front axle 2 pieces and for the rear axle 2 pieces will be needed
Fit to the models: Wartburg 312, wartburg 353 und Wartburg 1,3
Made in Germany
from 10,92 € to 8,50 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 3330
Shaft seal - universal shaft
Detail
Radial oel seal for wheel side he drive Wartburg 353 gearbox.
The sealing will be mounted at the inner side of the wheel bearing housing / steering knuckle (driveshaft side).
Fit the the left and right hand of the steering knuckle.
size: 45 x 60 x 7
material: NBR (Nitril-rubber)
with additional dust lip
made in Germany
two pieces will be needed (one for each drive shaft)
8,77 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7002
Centering washer dirve shaft
Detail
Special washer for centering the wheel hub and the drive shaft (wheel side).
Mounting place between castle nut and the wheel hub.
The washer fit to the front axle drive shaft.
fit to Wartburg 353 and Wartburg 1.3
delivery as an single part
material: steel, galvaniced
two pieces will be needed
original spare part number: 134 29 11 006 075 701
3,82 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8174
Wheel nut Wartburg
Detail
Castle nut for mounting the wheel hub - wheel bearing - connection.
The nut fit to the front axle drive shaft and to the rear axle kingpin.
fit to Wartburg 353 and Wartburg 1.3
delivery as an single part without pin
four pieces will be needed
3,84 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8025
Wheel hub W1,3
Detail
Wheel hub for the Wartburg 1.3 front axle.
Please note: this spare part is not identical with the wheel carrier of the Wartburg 353!
The internal teeth of the drive shafts is different.
material: steel, surface blank
internal teeth: 21 teeth
bolt circle: 4x160mm
new production: made in Europe
one piece will be needed for each wheel side (front axle)
fir to the vehicles: Wartburg 1,3 Limousine, Tourist and Trans
93,20 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 7397
Spring W1,3 front axle
Detail
Coil spring for the Wartburg 1.3 front axle. Fit to both typs: Limousine and Tourist from vintage: 1988.
length of the spring: original (lo=414mm)
made in Germany
2 pieces will be needed
86,47 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7324
Form ring 20mm for Spring, front axle
Detail
Rubber form ringfor the coil spring for the Wartburg 353 and 1,3 front axle (Wartburg 312).
This form ring is about 19-20mm thickness.
Plaese check at your Wartburg before, which ring is mounted!
Fit to both typs: Limousine, Tourist and Trans.
material: rubber
Form ring total thickness: 19-20mm
made in Germany
2 pieces will be needed
23,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8645
Form ring 25mm for Spring, front axle
Detail
Rubber form ringfor the coil spring for the Wartburg 353 and 1,3 front axle (Wartburg 312).
This form ring is about 25mm thickness.
Plaese check at your Wartburg before, which ring is mounted!
Fit to both typs: Limousine, Tourist and Trans.
material: rubber
Form ring total thickness: 25mm
made in Germany
2 pieces will be needed
23,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8647
Telescopic shock absorber, W1,3 - front axle
Detail
Buffer special made for the Wartburg 1.3 front axle with coil spring. Fit to all typs: Limousine, Tourist and Trans from vintage: 1988 onwards.
scope of delivery inclusive bushing down
upper side complete with mounting elements: 1x ring buffer A, 1x ring buffer B, 1x holder disc, 1x hexagonal nut M8 and 1x spring washer
made in Germany
2 pieces will be needed
89,63 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6063
2+1
1+1
Rubber sleeve cushion for shock absorber 30mm
Detail
The bushing is pressed in to the eye of the shock absorber diameter size 30mm.
Fit to Trabant 500,600,601 leaf spring shocks or Wartburg 311/312/353, DDR trailers shocks and so on...
1x length inner sleeve: 32 mm
1x rubber
made in Germany
2 or 4 pieces will be needed
12,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8028
Delivery only at advance payment.
screw for Steering knuckle leaver
Detail
hexagon head screw M10 x 45
fit to Wartburg 353 and Wartburg 1.3
tensile strength: 10.9
made in Germany
you will need 2 pieces for one steering knuckle leaver
1,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6319
Look plate for steering knuckle leaver
Detail
Look plate for hexagon bolt steering knuckle leaver.
Right and left hand mountable.
fit to Wartburg 353 and Wartburg 1.3
sheet matal, *bone style*
made in Germany
you will need 2 pieces at all
2,54 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7239
wheel bolt 80mm
Detail
universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 80mm consist the length of thread and the length of knurling.
legth: 80mm
thread: M12 x 1,5
thread length: 68mm
knurling diameter: 14,5mm
knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,89 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7203
wheel bolt 60mm with flat portion
Detail
Wheel bolt fit to the Wartburg 353 and 1.3 front axle with disc brake system. Inclusice one side cuted.
Please note:
The length of 60mm consist the length of thread and the length of knurling.
legth: 60mm
thread: M12 x 1,5
thread length: 48mm
knurling diameter: 14,5mm
knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,62 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 7202
wheel bolt 50mm with flat portion
Detail
Wheel bolt fit to the Wartburg 353 and 1.3 front axle with disc brake system. Inclusice one side cuted.
Please note:
The length of 50mm consist the length of thread and the length of knurling.
legth: 50mm
thread: M12 x 1,5
thread length: 37mm
knurling diameter: 14,5mm
knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,33 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 7677
wheel bolt 40mm
Detail
universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 40mm consist the length of thread and the length of knurling.
legth: 40mm
thread: M12 x 1,5
thread length: 28mm
knurling diameter: 14,5mm
knurling length: 7,6mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
4,98 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 7200
wheel bolt 50mm
Detail
universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 50mm consist the length of thread and the length of knurling.
legth: 50mm
thread: M12 x 1,5
thread length: 38mm
knurling diameter: 14,5mm
knurling length: 7,6mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
4,86 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 6450
Delivery only at advance payment.
1+2
Hub cap , plastic
Detail
Plastic cover for the inner hole of Wartburg wheel disk to cover the hub axle nut.
material: plastic, black
made in EU
for each wheel one piece will be needed
18,50 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7042
puller for ball joint 18/38mm
Detail
gable width: 18 mm
max. lenght of ball joint axle: 38 mm
best use for track rod joints of Trabant and Wartburg.
69,91 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6192
wheel bolt 60mm
Detail
universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 60mm consist the length of thread and the length of knurling.
legth: 60mm
thread: M12 x 1,5
thread length: 48mm
knurling diameter: 14,5mm
knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,62 €
inclusive VAT, plus shipping costs
Art.No. 7201
Wheel nut AM 12 x 1,5 cone collar
Detail
cink-coated wheel nut with cone collar for Trabant, Wartburg and all other vehicles with same bolts
thread: M12 x 1,5
spanner gap: SW 19 mm
replacement for original wheel nut with high quality
2,20 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6338
Wheel nut AM 12 x 1,5 cone collar, covered
Detail
Cink-coated wheel nut with bigger cone collar. The nut end is closed an cover the bolt against dirt and water. Usefull for Trabant, Wartburg and all other vehicles with same bolts
extended hexagon
thread: M12 x 1,5
spanner gap: SW 19 mm
2,10 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7297
Wheel nut AM 12 x 1,5 cone collar
Detail
cink-coated wheel nut with bigger cone collar for Trabant, Wartburg and all other vehicles with same bolts
extended hexagon
thread: M12 x 1,5
spanner gap: SW 19 mm
2,15 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6339
Wheel nut set AM 12 x 1,5 cone collar, covered
Detail
One set of cink-coated wheel nut with bigger cone collar. The nut end is closed an cover the bolt against dirt and water. Usefull for Trabant, Wartburg and all other vehicles with same bolts.Extended hexagon.
One kit consist of 16 pieces.
thread: M12 x 1,5
spanner gap: SW 19 mm
1,69 € per piece
26,99 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7499
Wheel nut set, AM 12 x 1,5 cone collar
Detail
One set of cink-coated wheel nut with cone collar for Trabant, Wartburg and all other vehicles with same bolts.
Kit consists of 16 pieces.
thread: M12 x 1,5
spanner gap: SW 19 mm
replacement for original wheel nut with high quality
1,25 € per piece
20,00 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7498
Wheel nut set, AM 12 x 1,5 cone collar
Detail
One set of cink-coated wheel nut with bigger cone collar for Trabant, Wartburg and all other vehicles with same bolts.Extended hexagon.
One kit consist of 16 pieces.
thread: M12 x 1,5
spanner gap: SW 19 mm
1,69€ per piece
26,99 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7500
Pin for wheel nut Wartburg
Detail
Locking pin for the castle nut to lock the wheel hub - wheel bearing - connection.
The pin fit to the front axle drive shaft and to the rear axle kingpin.
fit to Wartburg 353 and Wartburg 1.3
delivery as an single
four pieces will be needed
0,25 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8026
Band clamp , long
Detail
Rebound strap for mounting of sleeve rubbers of universal shafts
long band clamp (for example for mounting of sleeve rubber on shaft joint), for diameter from 40mm up to 110mm
application:
the band clamp have to bent around the sleeve rubber by hand, so that it clinging to the sleeve rubber in best way
fixing this position by hooking into
spanning the band clamp with a pincers
ready
3,81 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6408
Steering wheel Wartburg
Detail
Steering wheel for Wartburg, made in Europe.
fit to Wartburg 312, 353 and 1.3 modells like Limousine, Tourist, Camping and Trans
delivery as an single part
one pieces will be needed
123,76 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8268
Sleeve rubber W1,3 (outer universal shaft side)
Detail
Rubber boot for the outher drive shaft joint of the Wartburg 1.3
It is always one piece assembled form the outer side of the joint and one piece from the inner side.
This
oel (Art.-Nr.:6619)
have to be used for the lubication of the outer joint.
material: rubber, black
made in EU
delivery as an single part without mounting pats
Additional needed mounting parts (not scope of delivery of the rubber boot):
2x Band clamp, long (part.-No.:6408)
2x Clamp (part.-No.:7608)
additional needed tools for dismounting and mounting (not part of this offer):
1x Seeger ring pliers, external retaining rings 19-60mm (LDM-part.-Nr.:8322)
19,04 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8414
Sleeve rubber set outer universal shaft side W1,3
Detail
One kit of rubber boots and assambly parts for the outher drive shaft joint of the Wartburg 1.3
It is always one piece assembled form the outer side of the joint and one piece from the inner side.
Scope of delivery:
2x Rubber boot wheel side (LDM-Art.-Nr.:8414)
1x oel for the lubication of the outer joint (LDM-Art.-Nr.:6620)
2x Band clamp, long (LDM-part.-No.:6408)
2x Clamp (LDM-part.-No.:6780)
one kit will be needed for each drive shaft (total: 2 set)
additional needed tools for dismounting and mounting (not part of this offer):
1x Seeger ring pliers, external retaining rings 19-60mm (LDM-part.-Nr.:8322)
42,10 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8415
Form ring 10mm for grinded Spring, front axle
Detail
Rubber form ringfor the grinded coil spring for the Wartburg 353 and 312.
This form ring is about 10mm thickness.
Plaese check at your Wartburg before, which ring / Spring type is mounted!
Fit to typs: Limousine, Tourist and Trans.
material: rubber
Form ring total thickness: 10mm
made in Germany
2 pieces will be needed
23,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8652
Form ring 17mm for grinded Spring, front axle
Detail
Rubber form ringfor the grinded coil spring for the Wartburg 353 and 312.
This form ring is about 17mm thickness.
Plaese check at your Wartburg before, which ring / Spring type is mounted!
Fit to typs: Limousine, Tourist and Trans.
material: rubber
Form ring total thickness: 170mm
made in Germany
2 pieces will be needed
23,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8653
The complete offer in Front axle
* All prices inclusive VAT and plus
shipping costs
.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas