This site in german: Wartburg 1.3 > Ersatzteile > Auspuff 
You are here: > Wartburg 1.3> Spare parts> Exhaust system

Silencer and exhaust spare parts

The complete offer in Silencer and exhaust spare parts

Exhaust manifold seal with meatl ring

Better construction of the manifold seal. Material graphite texture paper with metal pressing ring for each cylinder.
Splitted seal (that is one exhaust manifold seal for two cylinder)
  • made in Germany by Elring
  • sealing between outlet side of the cylinder head and the exhaust manifold
  • fit to Trabant 1.1, Wartburg 1.3 and Barkas B1000-1- all of this motors have got an cross streem cylinder head
  • scope of delivery one paar (2 pieces)
Special offer normaly 18,77 € now 16,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6260

Exhaust manifold seal

Simple construction of the manifold seal. Material graphite texture paper.
Splitted seal (that is one exhaust manifold seal for two cylinder)
  • sealing between outlet side of the cylinder head and the exhaust manifold
  • fit to Trabant 1.1, Wartburg 1.3 und B1000-1 - bouth of this motors have got an cross streem cylinder head
  • scope of delivery one paar (2 pieces)
reduced from 5,64 € to 4,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 31

exhaust nut, copper plated

Secure nut for the Trabant manifold. Surface is plated with coper.
  • thread: M8
  • spanner: SW12
0,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7304

exhaust nut with collar, copper plated

Secure nut for the Trabant manifold. Surface is plated with coper.
Use for mounting without washer.
  • thread: M8
  • spanner: SW132
  • grate: 8.8
  • collar diameter: 17,3mm
  • highness: 9,2mm
0,74 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7305

Pin bolt for exhaust maifold

1,59 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7668

Cover plate for exhaust manifold

Cover plate for mounting at exhaust manifold with connection for warm air sucktion intake.
  • fit to exhaust manifold of Trabant 1.1 and Wartburg 1.3 (both 4-stroke)
  • material: metal, zink coated
  • made in Germany
19,74 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 39

Exhaust pipe

Exhaust flue for Wartburg 1,3 with double waste gas guiding up to the Y-branch pipe.
  • material: metal pipe
  • made in EU
  • one piece will be needed
87,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3024

Gasket for exhaust pipe

Exhaust gasket with middling quality for the connection between exhaust mainfold and exhaust double pipe
  • inclusive metal compress ring
  • made in Hungary
  • one piece will be needed
4,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3023

Gasket for exhaust double pipe

high quality and dimension accuracy gasket for the connection between exhaust mainfold and exhaust double pipe
  • inclusive metal compress ring
  • made in Germany
  • one piece will be needed
5,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6348

Clamp

  • simple pipe clamp
  • zinc-coated

Following a table on which places of the cars the pipe clamps will be used:
vehiclepipe connection fromto
Trabant 1.1exhaust input pipepre-silencer
 pre-silencerRear Muffler with pipes
Wartburg 353Rear Muffler with pipesmuffler with pipes
Wartburg 1.3exhaust input double pipepre-silencer
 pre-silencerconnection pipe
 connection pipeRear Muffler with pipes
2,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 37

pipe clamp d=42,5mm

  • pipe clamp made of 2mm steel strip
  • zinc-coated
  • widht: 25mm

Following a table on which places of the cars the pipe clamps will be used:
vehiclepipe connection fromto
Trabant 1.1exhaust input pipepre-silencer
 pre-silencerRear Muffler with pipes
Wartburg 353Rear Muffler with pipesmuffler with pipes
Wartburg 1.3exhaust input double pipepre-silencer
 pre-silencerconnection pipe
 connection pipeRear Muffler with pipes
3,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6344

Retainer

Retainer for exhauts sytems of the Trabant 1.1, Wartburg 1.3 and many other vehicle types (VW, Audi, Skoda, Seat,..)
  • material: rubber, black
  • made by German prducer
  • delivery as an single part
4,02 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 38

Pre-silencer W1.3

Exhaust pre silencer for the Wartburg 1,3 liter four cylinder engine.
  • delivery without mounting bits
  • made in EU
  • one piece will be needed
69,37 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3020

Pre-silencer for katalysator

Exhaust pre silencer with connection flange for the unregulated catalytic converter Wartburg 1,3 liter 4-stroke engine.
  • delivery without catalytic converter and mounting bits
  • made in EU
  • one piece will be needed
83,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3021

Connection - pipe W1.3

Exhaust connection pipe between pre silencer and after muffler for all types of Wartburg 1,3 like Limousine, Tourist and Trans
  • delivery without mounting bits
  • please note: we charge extra fees for bulky goods!!
  • made in EU
  • one piece will be needed
49,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3022

Exhaust aftermuffler W1.3

Exhaust aftermuffler for the Wartburg 1,3 liter four cylinder engine.
  • delivery without mounting bits
  • made in EU
  • one piece will be needed
103,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3019

Alu Spray 400ml

Spray on the basis of special mixture of resins and aluminium pigments.
Aluminium-zinc doubleprotection.
Best resistance to high temperatures.
Excellent for use at exhaust systems and for car body works.
  • contens: 400ml
  • product is free of FCKW
  • heat resistance up to approx 800 °C
price: 46,05 Euro / liter
18,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7493

Zinc-alu Spray 400ml

Spray on the basis of special mixture of resins and aluminium pigments.
Aluminium-zinc doubleprotection.
Best resistance to high temperatures.
Excellent for use at exhaust systems and for car body works.
  • contens: 400ml
  • product is free of FCKW
  • heat resistance up to approx 300 °C
price: 22,25 Euro / liter
8,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8428
The complete offer in Silencer and exhaust spare parts

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas