This site in german: Wartburg 1.3 > Ersatzteile > Motor 
You are here: > Wartburg 1.3> Spare parts> Engine

Engine spare parts and

Category Engine spare parts and has the following subcategorys:

The complete offer in Engine spare parts and

rubber diffusor for cold air intake

rubber diffusor tube for Air-Control-box of cold-/ warm air intake of Trabant 1.1

maybe also for the vehicles Wartburg 1.3 and B1000-1 (alle with 4-stroke engines)
original-IFA-spare part
18,21 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6665

intake silencer

air filter box for Wartburg 1.3

maybe also for the vehicles Trabant 1.1 and B1000-1 (alle with 4-stroke engines)
  • original-IFA-spare part
160,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6432

Hose for air-intake

Fresh air intake rubber hose.
54,11 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 1244

intake connection for carburettor

The input pipe deflect the fresh air into the carburettor of 4-stroke version of Trabant (carburettor type: 32 F 1-1)
and Wartburg (carburettor type: 34 TLA 51/2)
  • material: black rubber
  • original spare part
  • delivery without connection for under-inflation pipes , controler warm/cold air
68,20 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 1246

Air filter

fit for the vehicles Trabant 1.1, Wartburg 1.3 and B1000-1 (alle with 4-stroke engines)
  • material: paper ribs, vulcanized rubber lips
  • Made in Germany from the original equipment manufacturer
8,71 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1101

Oel filter

Fit to Trabant 1,l and 1,3 engine (Wartburg and Barkas B1000-1). Scope of delivery inclusive sealing ring.
  • made in Germany
  • one piece will be needed
6,78 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1102

Oilsump

Oil sump fit to all oilsump of Trabant 1,1 and wartburg 1,3 with four stroke engine
  • material: metal
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
73,29 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7129

Chain Oil pump

Chain for the support of the Oilpump fit to all oilsump of Trabant 1,1 and wartburg 1,3 with four stroke engine
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
19,83 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7134

Bleeder for crank case

Breather mounted at the crank case down of the Trabant 1.1,Wartburg 1.3 and Barkas B1000-1 with four stroke engine.
New original spare part.
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
67,98 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7480

Oil pump

Oilpump fit to all oilsump of Trabant 1,1 and wartburg 1,3 with four stroke engine
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
178,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7133

Screw for oel drain SW19

Oel drain screw plug. Fit to all oilsump of Trabant 1,1 and wartburg 1,3. Produced by FEBI.
  • spanner size: SW19
  • made in Germany
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
1,37 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7128

seal ring for oel drain screw plug

copper seal ring for oel drain screw plug. Fit to all oilsump of Trabant 1,1 and wartburg 1,3. Produced by ELRING.
  • dimensions: 14 x 20x 1,5
  • made in Germany
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
0,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6426

V-belt AVX 10 x 700

Alternator belt fit to Wartburg 1,3, Trabant 1,1 and Barkas B1000-1.
  • dimensions: 10mm wide, 700mm long
  • made in England
7,61 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1106

Toothed belt 108 / 19,1

The toothed belt fit to Trabant 1,1 and Wartburg 1,3 and Barkas B1000-1 as well.
The timing belt will be delivered as an single part, without any mounting parts.
  • wide: 19,1mm (3/4 inch)
  • count of teeth: 108
17,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1107

radial sealing for crank shaft (side of flywheel) 85 x 105 x 11 *ELRING*

radial sealing for one side of crankshaft (side of flywheel)
fit to Trabant 1.1 and Wartburg 1.3

Best available type of Radial sealing 85 x 105 x 11 with:
  • dust lip
  • left spin
  • higher working temperatur range
  • approved ELRING quality

  • inner diameter: 85 mm
  • outer diameter: 105 mm
  • width: 11 mm
  • material: Viton/Polyacryl-rubber

new produced
19,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6343

radial sealing for crank shaft (side of flywheel) 85 x 105 x 12

Sealing ring for Trabant 1.1 and Wartburg 1.3 engine cluch side.
High quality with additional dust lip.
The dust lip protect the oil stripe lip for abrasion of the cluch.
  • size: 85x105x12
  • made in Germany
  • one piece will be needed
13,04 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6132

Cover sealing flywheel side

Spezial paper seal for the metal cover od the radial sealing for one side of crankshaft (side of flywheel)
fit to Trabant 1.1 and Wartburg 1.3
  • made in Germany
  • one piece will be needed
4,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7050

Radial sealing for camshaft and crankshaft ( 32 x 47 x 10) with dust lip *ELRING*

radial sealing for camshaft and one side (side of belt) of crankshaft
fit to Trabant 1.1, Wartburg 1.3 and Barkas B1000-1
Made by ELRING

Best available type of Radial sealing 32 x 47 x 10 with additional dust lip, dual spin and higher working temperatur range.
  • inner diameter: 32 mm
  • outer diameter: 47 mm
  • width: 10 mm
  • material: Viton/Polyacryl-rubber
13,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6341

Radial sealing for camshaft and crankshaft( 32 x 47 x 10)

radial sealing for camshaft of Trabant 1.1 and Wartburg 1.3
The simplest and cheapest typ WITHOUT dust lip.
  • size: 32x47x10
  • made in Germany
5,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 629

Radial sealing for camshaft and crankshaft ( 32 x 47 x 10) with dust lip

radial sealing for camshaft and one side of crankshaft of Trabant 1.1 and Wartburg 1.3
more professional type of Art.No.629 (Radial sealing for camshaft (32 x 47 x 10)) with additional dust lip
  • size: 32x47x10
  • made in Germany
9,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6340

Camshaft timing gear

Timing gear for toothed belt camshaft. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • made in Germany
  • number of theeth: 44
  • one piece will be needed
52,22 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7261

Bolt for V-pully crankschaft

Bolt with hexagon socket for the mounting of the V-pully at the crankshaft gear for toothed belt.
Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • four pieces will be needed
  • made in Germany
2,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7484

Bolt for crankshaft gear

High grade special bolt for the mounting of the crankshaft gear for toothed belt. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • one piece will be needed
  • made in Germany
5,41 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7482

Crankshaft gear

Crankshaft gear for toothed belt. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • made in Germany
  • number of theeth: 44
  • one piece will be needed
72,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7262

Cover sealing pullywheel side

Spezial paper seal for the metal cover od the radial sealing for one side of crankshaft (side of toothed belt)
fit to Trabant 1.1 and Wartburg 1.3
  • made in Germany
  • one piece will be needed
9,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7051

Seal for oel pan

Very reasonable Seal for oel sump with medium quality. Fit to 4-stroke engine of Trabant 1.1 and Wartburg 1.3.The seal between oil sump and engine block.
  • Material:chaded sealing paper
  • made in EU
  • one piece will be needed
9,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 634

Sealing kit engine block down

Complete kit for the engine block. Fit to 4-stroke engine of Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
Made by Eling.
98,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7485

Seal for oil pan

Oelsump seal fit to 4-stroke engine of Trabant 1.1 and Wartburg 1.3.
Approved quality made by ELRING. It is the seal between oil sump and engine block.
  • material: chaded spezial-sealing paper
  • made in Germany
  • one piece will be needed
21,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6342

Tick-over valve

Control unit for handling the overrun cut-off at the four stroke engine.
Fit to the following vehicles with the carburettor types:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1
73,42 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 757

Oel pressure switch, black

oel pressure switch
it closes if oil pressure is more than 140 kPa (+/-20 kPa)
colour of plastic: black

original name of the part:
DTR 8640.10/17.1.1
14,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 840

Oel pressure switch, colour brown

Oel pressure switch
it opens if oil pressure is more than 30 kPa (+/-15 kPa)
colour of plastic: brown

original name of the part:
DTR 8640.9/2.1.1
14,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 841

Carburettor bowdencable

Bowdencable fir to all Wartburg 1,3
  • length total: 125 cm
  • length of the vover: 102,5cm
  • made in the EU
24,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3515

Key rubber spring (front engine bearing W1.3)

Key rubber spring to mount between support on frontside (left) of combustion engine and frame.
  • one piece will be needed for one Wartburg 1.3
27,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7005

Socked spring

Sleeve spring (round) have to be pressed in the support for engine or gerabox retainer.
  • outside diameter: 75mm
  • length: 55mm
  • length of the mounting bushing inside: 68mm
  • diameter of the mounting bushing inside: 11mm
  • Trabant 1,1 one piece will be needed for engine-gerbox support front left hand
  • Wartburg 1,3 two pieces will be needed for engine support front and for gearbox support rear
70,77 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 635

Bolt for flywheel

Special bolt for flywheel mounting.
Fit to the engines of the vehicles Trabant 1.1, Wartburg 1.3 or Barkas B1000-1.
  • 6 pieces will be needed
  • with dry threadlocker
  • grade: 12.9
  • made in Germany
2,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7422

Engine block

Single part without any add-on components.
The block can be used for the vehicles Trabant 1.1, Wartburg 1.3 or Barkas B1000-1.
Brand new spare part, zero mark for pistons are possibe to hone.
800,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7421

Engine for Wartburg 1,3 or Trabant 1,1

you have to send your engine to our company and we will overhaul it complete.

Piston ring set (zero mark)

One set of piston rings consitst of:
4x piston ring 75 x 1,75mm
4x piston ring 75 x 2mm
4x oil scraper ring 75 x 3mm
Fit to all four strok engines Trabat 1.1, Wartburg 1.3, and Barkas B1000-1.
  • high quality made in Germany
  • one set will be needed
  • useable for the bore size: 75,000mm
135,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7835

Switch for throttle valve

Switch for overrun cut-off.
Fit to Trabant 1,1 and Wartburg 1,3 carburettor.
Original spare part
9,71 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6649

controller-unit for overrun cut-off (T1.1/W1.3)

Electronical control unit for overrun cut-off of 4-stroke engines of Trabant or Wartburg.
Discontinues the fuel supply during overrun. Works in tandem with Switch for throttle valve und tick-over valve
81,29 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6489

ADDINOL 4 stroke motor oil SAE 10W-40, 1 litre

ADDINOL SEMI SYNTH SAE 10W-40
for Trabant 1.1, Wartburg 1.3 and most other motors from VAG-combine (Audi, VW, Seat, Skoda)
particulate with synthetic oil
no sheer minerally oil
contens: 1 Litre
Additional comment: Notes for used oil disposalLink opens in a new window.
15,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6248

ADDINOL 4 stroke motor oil SAE 10W-40, 4 litre

ADDINOL SEMI SYNTH SAE 10W-40
for Trabant 1.1, Wartburg 1.3 and most other motors from VAG-combine (Audi, VW, Seat, Skoda)
particulate with synthetic oil
no sheer minerally oil
contens: 4 Litre
Additional comment: Notes for used oil disposalLink opens in a new window.
price: 10,95 Euro for each Liter
43,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6249

ADDINOL 4 stroke motor oil SAE 10W-40, 20 litre

ADDINOL SEMI SYNTH SAE 10W-40
for Trabant 1.1, Wartburg 1.3 and most other motors from VAG-combine (Audi, VW, Seat, Skoda)
particulate with synthetic oil
no sheer minerally oil
contens: 20 Litre
price: 7,21 Euro for 1 Liter
144,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6250

ADDINOL FLUSHING OIL SUPER, 0,5l

ADDINOL FLUSHING OIL SUPER
The perfect inside cleaner for engines of Trabant 1.1, Wartburg 1.3 and most other 4-stroke engines

contens: 0,5 Litre (sufficent for appr. 5 L engine oil filling)
  • proper flushing guarantees complete removal of used oil and maximum cleanliness of the engine
  • dissolves sludge and solids
  • Power Conditioner increasing the engine output
13,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6889

Exhaust manifold seal

Simple construction of the manifold seal. Material graphite texture paper.
Splitted seal (that is one exhaust manifold seal for two cylinder)
  • sealing between outlet side of the cylinder head and the exhaust manifold
  • fit to Trabant 1.1, Wartburg 1.3 und B1000-1 - bouth of this motors have got an cross streem cylinder head
  • scope of delivery one paar (2 pieces)
reduced from 5,64 € to 4,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 31

Exhaust manifold seal with meatl ring

Better construction of the manifold seal. Material graphite texture paper with metal pressing ring for each cylinder.
Splitted seal (that is one exhaust manifold seal for two cylinder)
  • made in Germany by Elring
  • sealing between outlet side of the cylinder head and the exhaust manifold
  • fit to Trabant 1.1, Wartburg 1.3 and Barkas B1000-1- all of this motors have got an cross streem cylinder head
  • scope of delivery one paar (2 pieces)
Special offer normaly 18,77 € now 16,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6260

Seal for water pipe

Paper sealing for the cooling water pipe connection to the engine block, rear side water pump.
Fit ot Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 with four stroke engines.
  • made in Germany
2,65 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7483

Piston ring pliers

Piston ring mounting and demounting tool.
With this pliers the changing of the piston rings will be simple and save, because the rins are retained at the outside.
  • working dimensions: 1-100mm
  • surface: nickel-plated
  • with blue plastic handles
  • made in Germany
35,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7619

Ring gear for starter

Starter gear to mount at the 4-stroke engine fly wheel.
  • Fit to the vehicles: Trabant 1.1, Wartburg 1.3 and
    Barkas B1000-1
  • 113 theeth
  • inside diameter: 212mm
  • wide: 8mm
  • made in EU
84,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 686
The complete offer in Engine spare parts and

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas