Accessories

Category Accessories has the subcategory

The complete offer in Accessories

Speedometer with trip meter

Detail

Round speedometer for the cars Wartburg 1.3, Wartburg 353, Trabant 1.1, Barkas B1000 and B100-1.
type:

Speedscale up to 150km/h
inclusive trip meter
power 12V
delivery without bulbs and without bulb retainer
front rim : black
mounting diameter: 100mm
genuine spare part
Zak No: 3.0230/47

81,64 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7092

Clip for trademark

Detail

Mounting Clip for letterings.

Material: PVC
price for each piece
made in Europe

0,19 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1258

Splint-pin set, 555 pices

Detail

Splint-pin set, complete with clear plastic box.
Consist of 555 differnt splint diameters and sizes. Electrogalvanized, DIN 94.
scope of dlivery:

1,6 x 32 (150 pieces)
2,4 x 25 (150 pieces)
2,4 x 38 (100 pieces)
3,2 x 32 (75 pieces)
3,2 x 50 (50 pieces)
4,0 x 64 (30 pieces)

17,03 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7739

Splint-pin set, complete with metal box

Detail

Splint-pin set, complete with metal box.Consist of 1150 differnt splint diameters and sizes. Electrogalvanized, DIN 94.
scope of dlivery:

1,6 x 32 (100 pieces)
2 x 22 (100 pieces)
2 x 32 (100 pieces)
2 x 40 (100 pieces)
3,2 x 20 (100 pieces)
3,2 x 32 (100 pieces)
3,2 x 40 (100 pieces)
4 x 32 (100 pieces)
4 x 40 (100 pieces)
4 x 50 (100 pieces)
5 x 40 (50 pieces)
5 x 50 (50 pieces)

72,35 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1342

Handbrake cable, complete

Detail

handbrake cable for for Wartburg (rear axle).
fit to all type of Wartburg 3 and 4 cylinder engine.
both cables are symmetric and have the same length

the complete lenght is 160 cm
2 pieces will be needed

32,56 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3090

Sealing plate for hand brake lever (W353/W1.3)

Detail

Sealing plate for hand brake lever mounted at the care frame - body.
Fit to all variants of Wartburg 311, 312, 313, 353 und 1.3 (4-takt)
This part is an new reproduction, best replacement for the original one. Made from our own produced moulding tool.

material: oel and grease resistant rubber (NBR), colour black
Reproduction in best quality
made in Germany
one piece will be needed for each car

27,80 €inclusive VAT, plus shipping costs

Art.No. 7004

Screen wipers Wartburg 1.3

Wiper blade rubber

Detail

Rubber section for wiper blade, single part.Scope of delivery without fixing metal holder.

length: 415mm
original spare part
fit to all W353 and W1,3 models
2 pieces will be needed

5,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6626

Wiper blade chrome

Detail

Original wiper blade made of stainless steeel complete with 2 leading spring arms, wiper rubber and fixing plug for wiper holder.
Please note: only fit to the original wiper arm OE-Nr.:8746.28 ! Does not fit to our offered wiper arms LDM-Art-Nr.:3210 und 7496 !!

length: 415mm
fit to all Wartburg 353 and Wartburg 1,3 models with wiper arm OE-Nr.:8746.28
2 pieces will be needed

Original number: 8746.28-2

14,21 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6935

Wiper blade, new version

Detail

wiper blade complete with 3 leading spring arms, wiper rubber and fixing plug for wiper holder.
latest version of the wiper blade, it will be pinned at the wiper arm.

length: 415mm
fit to all W353 and W1,3 models
2 pieces will be needed

24,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 3205

Wiper blade, old version

Detail

wiper blade complete with 3 leading spring arms, wiper rubber and fixing plug for wiper holder.
Old version of the wiper blade, it will be mounted by an hock at the wiper arm.

length: 415mm
fit to all W353 and W1,3 models
2 pieces will be needed

additional needed parts::

1x Wiper arm, old version, LDM-part.no.: 7496

20,19 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7495

Wiper arm old version

Detail

Wiper arm complete with tension spring and clamping sleeve for fixing
Version with hock to clip in the wiper blade.

lenght: 360mm
fit to W353 and W1,3
two pieces will be needed

28,41 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7496

Wiper arm new version

Detail

wiper arm complete with tension spring and clamping sleeve for fixing
Version for pinned the wiper blade.

lenght: 300mm
fit to W353 and W1,3
two pieces will be needed

12,44 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 3210

Windscreen wiper Tourist

Detail

Rear windshild wiper complete with wiper arm and wiper blade. Arm complete with tension spring and clamping sleeve for fixing

lenght of the arm: 300mm
lenght of the wiper blade: 330mm
original spare part
fit to W353 and W1,3
one will be needed

12,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6625

Plastic cap for wiper arm

Detail

Sealing cap (single part) for the mounting place of the wiper arm.
Fit to CZ models Trabant, Wartburg and B1000.
Can be used for screw joints spanner gap SW 13.

material: plastic, black
original spare part
two pieces will be needed for models of Limousine
station wagons will need three of this spare part

0,49 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7440

Tank for windscreen washer

Detail

Plastic reservoir for windscreen washer made of plasic.
This is an original spare part.
Fit for all car types of Wartburg 353 from5-85 and all Wartburg 1.3
The plasic tank is an original single part without any accesorys.

without cap and wash pump
new type form year 5-85
one piece will be needed

Scope of delivery:

Additional parts (not part of this offer):

electrical wash pump, LDM-part.no.: 1128

original spare part

57,60 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3215

Double jet for windscreen washer Detail Simpe and universal kind of double jet. Can be used for mechanial or electrical windscreen washer pumps. Delivery inclusive sealing and mounting nut. Fit to washer hoses: PVC Intake line for windscreen washer (ID=4mm) PVC Intake line for windscreen washer (ID=5mm) Made in Europe
3,51 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 1124

Single jet for windscreen washer, original Detail Jet for windscreen cleaning. Can be used for mechanical and electrical wash pump. Washer jet with only one adjustable jet. made in Germany colour: black
original spare part number: 9.0002	4,55 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7444

Retainer for windscreen washer, original Detail Metal holder for jet for windscreen cleaning. Can be used for mechanical and electrical wash pump. Fit to all Single or double washer jets made in GDR. steel metal, spring steel, surface blank
original spare part number:WN 9015	2,19 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7443

Yoke for electrical pump

Detail

Retainer for the pump for windshield washer.
Fit to all Wartbrug with tank for fresh waterfrom vintage march 1985.

original spare part
one piece will be needed

Original spare part number: 1366573005031127

3,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7454

Electrical pump for windscreen washer

Detail

The pump for windshield washer is a complete component. Mounted at all Wartbrug with tank for fresh waterfrom vintage march 1985.

Reproduction
delivery without sealing LDM-part-no.: 7579
supply voltage 12V
electrical connection over two flat plugs: 6,3 x 0,8
one piece will be needed

16,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1128

Sealing for pump windscreen washer - bottle

Detail

Rubber sealing for the pump for windshield washer at the fresh water bottle. Mounted at all Wartbrug 1,3 with tank for fresh water and Wartburg 353 from vintage march 1985.

material: rubber, black
one piece will be needed

3,45 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7579

Metal holder for water bottle

Detail

Metal retainer for the windscreen water bottles 1,5 liter of the Trabant, Muticar, B1000 and 2,5 liter of the Wartburg models.

original spare part
material: steel, surface galvaniced
one piece will be needed

original part number: WN 9143

5,61 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7442

windscreen washer kit

Detail

Complete kit for windscreen washer system with electrical pump and water bottle
voltage: 12V
Scope of delivery:

bottle 1,5 liter
cap
metal holder
wash pump 12V
1m plastic hose (connection pump-spray jet
1 piece of two double jet washer inclusive retainer spring

fit to follow washer systems:
windscreen Trabant 601
Wartburg 353 and 1.3 Tourist rear window

56,53 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6907

electrical pump for windscreen washer Detail electrical pump to put into the water bottle of windscreen washer voltage: 12V fit to follow washer systems: windscreen Trabant 601 rear window Wartburg 353 and 1.3 TOURIST (only for estate wagon)
42,46 €inclusive VAT, plus shipping costs temporary not available Art.No. 1125

Water vessel for windscreen washer system, singel part Detail Water bottle for windscreen washer system, to use in tandem with electrical pump bottle Volume: 1,5 liter original spare part fit to follow washer systems: windscreen Trabant 601 Wartburg 353 and 1.3 TOURIST rear window single part without pump, cap and metal holder
parts-no. 136 65 730	33,80 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6908

Cap for water vessel for windscreen washer system Detail Plastic cap with mounting sprap for the water bottle of the windscreen washer system. The plug close up the refilling hole. To use at many reservoir bottles with electrical or mechanical pump. fit to follow washer systems: Trabant 601, Trabant 1.1, Wartburg 1.3, Wartburg 353, Multicar, W50 and so on
4,75 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7357

Trademark * IFA WARTBURG* Detail Trademark with the lettering IFA Wartburg. material: plastic, black Scope of delivery complete with mounting plugs. The tradmark will be mounted at the car body with four plastic sticks at the rear side.
5,75 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 3550

Trademark * TOURIST * Detail Trademark with the lettering tourist. material: plastic, black Scope of delivery complete with 4 mounting plugs. The tradmark will be mounted at the car body with four plastic sticks at the rear side.
5,22 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 3552

Trademark * 1,3-S *

Detail

Plastic lettering for the rear of the Wartburg 1,3. Fit at the original holes. Mounting only with pins for letterings.
High-grade new production.

material: plastic, black
made in EU
scope of delivery inclusive pins
one piece will be needed

9,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8081

Trademark * 1,3 *

Detail

Plastic lettering for the rear of the Wartburg 1,3. Fit at the original holes. Mounting only with pins for letterings.
High-grade new production.

material: plastic, black
made in EU
scope of delivery inclusive pins
one piece will be needed

5,22 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 3553

T-Shirt LDM-Tuning, white Detail white T-Shirt made of 100% cotton printed lettering on front- and back-side size: M
11,99 €inclusive VAT, plus shipping costs temporary not available Art.No. 6425

Universal boot kit

Detail

Bellows for many exertions at automobiles, trailers, caravans and ships ...
size:

length:19cm diameter:10mm / 30mm
length:23cm diameter: 35mm / 35mm
length:15cm diameter:30mm / 42mm
length:13cm diameter:41mm / 48mm
length:12cm diameter:41mm / 55mm
different length and diameter combinable
length of the bellow pice: 95mm

17,28 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7010

Replacement glass for RETRO reverse lamp

Detail

Red glass as spare part for our RETRO reverse indication lamp

material: clear (white) glass
made in Germany

8,93 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7137

Retro rear fog lamp for rear bumper

Detail

Chromed reversing fog light for the mounting on top of the bumber.
The lamp made of high end fabrication and the design fit brilliant to historical cars.

colour: chromium-plated casing, red glass
size: 11 x 5,5 cm
delivery without bulb
made in Germany
with E-icon

159,88 €inclusive VAT, plus shipping costs

Art.No. 6877

Retro licence plate lights

Detail

Chromed reversing registration plate light.
Mounting with two M6 nuts.
The lamp made of high end fabrication and the design fit brilliant to historical cars.

colour: chromium-plated casing, clear lense
size: L=82mm x B=29mm x H=27mm
bolt distance: 45mm
delivery without bulb
made in Europe
mit E-Zeichen

16,86 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7989

Replacement glass for RETRO rear fog lamp

Detail

Red glass as spare part for our RETRO fog light

material: red glass
made in Germany

19,99 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7136

Retro back up lamp for rear bumper

Detail

Chromed back up light for the mounting on top of the bumber.
The lamp made of high end fabrication and the design fit brilliant to historical cars.

colour: chromium-plated casing, clear glass
size: 11 x 5,5 cm
delivery without bulb
made in Germany
with E-icon

134,63 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6876

Bulb retainer display instruments, screw pin

Detail

Holder for bulbs with screw pin for wire connection. Can be used for nearly all IFA vehicles.
Type with contact for screw connection: up tp 1,5 mmm².
Useabe for bulbs 6V, 12V oder 12V 2W with Ba7S base as speedometer lightning, display and indecator lights.

new spare part
delivery without bulb

6,10 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7844

Bulb retainer display instruments

Detail

Holder for bulbs as an checked secound hand part. Can be used for nearly all IFA vehicles.
Type with contact pin for wire plug: 6,3x0,8 (standart)
Useabe for bulbs 6V, 12V oder 12V 2W with Ba7S base as speedometer lightning, display and indecator lights.

delivery without bulb and pin
new Reproduction

4,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7843

Rubber cover for ignition key

Detail

Grip rubber for mounting at the ignition key.
This spare part is an original one.
Fit for the vehicles: Trabant, Wartburg, W50, Barkas LO, LD Multicar usw.

material: rubber, black
original spare parts
delivery as an single part

9,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8193

Delivery only at advance payment.

Spare key, copy is made from yor key number

Detail

Production of an spare key for door, ignition or fuel cap looks and so on...
You have to tell us your key number per email, fax or letter.
Keys for the vehicles: Trabant, Wartburg, W50, Barkas LO, LD Multicar usw.

delivery time about one to two weeks
all Trabant keys possible

Please write here your keynumber in:

29,75 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1341

Delivery only at advance payment.

Combi-instrument

Detail

Round instrument for the cars Wartburg 1,3 and B1000-1.
Original spare part for display the engine temperature and the fuel gauge.
type:

late type with LED
inclusive connection plug
power 12V
scope of delivery inclusive without bulbs
front rim : black
mounting diameter: 100mm
genuine spare part
Zak No: 3.085101/47

35,90 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7354

Inner rear view mirror Wartburg

Detail

Panorama mirror for the Wartburg 353 and 1.3 indoor.
The spare part is original made in Germany.

lenght: 24,5 cm
wide: 7 cm
inckusive plastic feet for mounting at the roof fram

19,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1264

Spring clip for interior lining

Detail

Clip for mounting the door trim panels or the inner wheel covers. Fit to all types of Trabant, Wartburg, Barkas and many IFA vehicles.

material: spring steel, surface, galvaniced

0,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1160

Steering wheel Wartburg

Detail

Steering wheel for Wartburg, made in Europe.

fit to Wartburg 312, 353 and 1.3 modells like Limousine, Tourist, Camping and Trans
delivery as an single part
one pieces will be needed

123,76 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8268

Wiper set new version

Detail

Complete wiper kit for the Wartburg lates version, wiper blade will be pinned at the wiper arm.
length og the wiper blade: 415mm
Set consists of:

fit to all W353 and W1,3 models
One set will be needed
made in EU

35,44 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 8311

Handle for sunshine roof

Detail

Turning handle for Wartburg 353 and 1,3 sliding roof.
New production, made of plastic.
Please note: only fabricated part, the surface have to be finished byself.

diameter: 93mm
material: plasic
colour: ivory
made in Germany
one piece will be needed

fabricated, not finished survace !

35,70 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8385

Bulb retainer display instruments, additional negative terminal

Detail

Holder for bulbs as an new reproduction part. Can be used for nearly all IFA vehicles.
Type with two contact pins for wire plug: 6,3x0,8 (standart)
1x pin for plus terminal (+) and 1x pin for negative pin (-)
Useabe for bulbs 6V 2W or 12V 2W with Ba7S base as speedometer lightning, display and indecator lights.

New repoduction
delivery without bulb
made in EU

3,80 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 8443

Spring for tank plate

Detail

Torsion spring for hinged plate, fit to Wartburg 353 and Wartburg 1,3.
Will be mounted on the tank plate and car body.
The spring supports the closing of the hinged plate.

material: steel
surface: galvaniced
one piece will be needed
delivery as an single part

Original spare part number: 1342921001296301

8,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8548

Outer door handle, left side, PVC black, complete with look and key (EU)

Detail

Reproduction door handle made of plastic for Multicar, Trabant, Wartburg, Barkas, W50.

colour: black
scope of delivery complete with lock and key
good quality made in EU

19,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8631

The complete offer in Accessories

* All prices inclusive VAT and plus shipping costs.