This site in german: Trabant 1.1 > Ersatzteile > Kraftstoffsystem 
You are here: > Trabant 1.1> Spare parts> fuel system
Navigation

fuel system

The product category Trabant 1.1 > Spare parts > fuel system is spread over 8 sites:

12345678
Show all products
Rubber fuel hose and clamps 

Rubber Fuel hose, 7,5 mm

Flexible fuel hose with inside texture and rubber surface. Inside diameter 7,5mm.
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
  • inside diameter: 7,5 mm
  • material: petrol resistant rubber with inside texture
  • made in Germany
price per meter: 5,10 Euro
5,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6308

Hose clip for fuel hose 7,5 mm with rubber surface

Clamp fpr flexible fuel hose (7,5mm inside diameter) with inside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 14mm
  • wide: 9mm
  • re-usable
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8163

Hose clip for fuel hose, 7,5 mm with rubber surface

Clamp fpr flexible fuel hose (8mm inside diameter).
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 14 mm
  • wide: 8,5mm
  • re-usable
1,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8164

Polyamid fuel pipe 8 x 1, price per meter

Fuel line 8 x 1 mm
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
outer diameter:8 mm
inner diameter:6 mm
wall thickness:1 mm

price is for one meter (max. 20 meter in one piece)

special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.
price 4,80 Euro / meter
4,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6033

Polyamid fuel pipe 6 x 1, price per meter

Fuel line 6 x 1 mm, most vehicles used as rear flow pipe for the petrol pump.
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
outer diameter:6 mm
inner diameter:4 mm
wall thickness:1 mm

price is for one meter (max. 20 meter in one piece)

special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.
Bitte beachten: abgelängte Ware auf Kundenwunsch, keine Rücknahme oder Umtausch!
4,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7513

Polyamid fuel line 8 x 1

Fuel line 8 x 1 mm
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
outer diameter:8 mm
inner diameter:6 mm
wall thickness:1 mm

price is for one meter (max. 20 meter in one piece)

special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.
price per meter: 3,80 Euro
19,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6032

Polyamid fuel line 6 x 1

Fuel line 6 x 1 mm, most vehicles used as rear flow pipe for the petrol pump.
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
outer diameter:6 mm
inner diameter:4 mm
wall thickness:1 mm

price is for one meter (max. 20 meter in one piece)

special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.
price per meter: 3,20 Euro
16,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7514

Reinforcement bushing for fuel pipe 8 x 1

reinforcement bushing for our polyamide fuel pipe 8 x 1 (Art.No.: 6032 and 6033)
material: brass

It should be uesed for every connection between polyamid fuel pipe and fuel hose!
mor informations: see details
0,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6305

Reinforcement bushing for fuel pipe6 x 1

reinforcement bushing for our polyamide fuel pipe 8 x 1 (Art.No.: 7513 and 7514)
material: brass

It should be uesed for every connection between polyamid fuel pipe and fuel hose!
mor informations: see details
0,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7515

Sealing for transmitter fuel gauge

Rubber seal for the sensor of the fuel gauge as an single part.
Fit to all vehicle models: Trabant 601, Trabant 1.1, Wartburg 353, Wartburg 1.3, Brakas B1000, Barkas B1000-1, Multicar.
  • material: fuel resistant rubber, colour: black
  • made in Germany
  • one piece will be needed
4,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7461
The product category Trabant 1.1 > Spare parts > fuel system is spread over 8 sites:
12345678
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas