Home
Impressum
Terms of business
Basket
You are here: >
Trabant 1.1
>
Spare parts
>
fuel system
Shop
IFA engine
pistons
IFA-vehicles
Framo
P70 / F8 / F9
W50/L60
Trabant 500/600
Wartburg 311 / 312 / 313
Multicar M22
Multicar M24
Multicar M25
Multicar M26
Multicar M27
Trabant 601
Spare parts
Tuning parts
complete cars
Trabant 1.1
Spare parts
Exhaust System
Brakes
Front brake
Rear brake
Electrical system
Lighting
Engine
cooling system
clutch system
carburettor
cylinder head
ignition system
fuel system
Gearbox
Front axle
Steering
wheel nuts
Rear axle
Panes and sealing rubbers
Body
mud guards
wheel house
side doors
bumper bar
Engine bonnet
Accessories
badget
Carpet set
key fob, key figure
letterings
valve caps
Tuning parts
Brakes
wheel spacer
Electrical system
exhaust system
valve caps
Roll bar
roll cage
tuning suspension
Wartburg 353
Spare parts
Tuning parts
Wartburg 1.3
Spare parts
Tuning parts
Barkas B 1000
Spare parts
Ball joints, accessories
Boots for ball joints
Skoda
Trailer
Bastei-camper
Camptourist / Klappfix
Intercamp / Oase
Qek-camper
Special made
Bulbs
12Volt
6Volt
24 Volt
connecting wire and accessory
bicolored car wires
Single colour wire
manufactured wires
workshop requirement
hose clips
tools
Lubricants
Mounting parts
fuel tank coating
Protection equipment
Varnish and paint
Accessory
Corrosion protection
adhesive bonded joint
Bowden cable
Carburetor jets
care products
Antifriction bearing
Grooved ball bearing
Cylindrical roller bearing
oils
Special items
Service
privacy policy
Terms of business
Used Oil disposal
Taking back of batterys
Downloads
shipping costs
Favorite links
Impressum
Produktindex
Search
Basket
fuel system
The complete offer in fuel system
Carburettor membrane square W1,3 / T1,1 / B1000-1
Detail
Singel part of the square carburettor membrane.
Membrane inserts for the carburettor type:
32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
OE Nummer: 1611757005 / 1352940230067816
24,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8627
Carburettor membrane small W1,3 / T1,1 / B1000-1
Detail
Singel part of the small carburettor membrane.
Membrane inserts for the carburettor type:
32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
OE Nummer: 1611757005 / 1352940230067816
24,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8628
Set of carburettor membranes W1,3 / T1,1 / B1000-1
Detail
Membranes inserts for the carburettor type:
32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
86,90 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 7925
Sealing set carburettor
Detail
One set of sealings for repairing of the carburettor Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
Fit for the carburettor types:
32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
Kit contens of paper sealings:
1x Sealing carburettor case (part.-no.:7560)
1x Sealing carburettor (side) (part.-no.:8254)
1x Sealing carburettor (rectangle) (part.-no.:8255)
Kit contens of rubber O-sealings:
2x Rundring 2,9mm (Art.-Nr.:8240)
1x Rundring 5,28mm (Art.-Nr.:8239)
1x O-ring 9,25mm (part.-no.:8238)
1x O-ring 18mm (part.-no.:8237)
1x O-ring 29,5mm (part.-no.:8236)
1x O-ring 80mm (part.-no.:8235)
Kit contens of aluminium sealings:
1x Aluminium-ring 12mm (part.-no.:8261)
1x Aluminium-ring 10mm (part.-no.:8262)
1x Aluminium-ring 13,8mm (part.-no.:8263)
28,89 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7415
Self-repair-set carburettor
Detail
Set to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 und Barkas B1000-1.
fit to the carb typs:
32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
152,11 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 746
Sealing carburettor case
Detail
Paper sealing as an single part
4,69 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7560
Sealing carburettor (side)
Detail
Paper sealing as an single part
6,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8254
Sealing carburettor (rectangle)
Detail
Paper sealing as an single part
3,77 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8255
Float needle valve W1,3 / T1,1 / B1000-1
Detail
Valve for controlling the petrol level for the carburettor type:
32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
original spare part number: 135 29 40 230 078216
19,55 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 82
Nozzle self-repair-set carburettor T1,1
Detail
Self repairset of nozzles for refresh the Trabant 1.1 carburettor.
Fit to the carburettort type: 32F 1-1 Trabant 1.1
43,14 €
inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.
Art.No. 7223
O-ring 2,9mm for carburettor
Detail
Special sealing ring as round packing cord as single part.
This 0-ring rubber is petrol and temperature resistant.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
diameter: 2,90mm
material: high temperature and fuel resistant rubber, black
two piece will be needed
2,55 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8240
O-ring 5,28mm for carburettor
Detail
Special sealing ring as round packing cord as single part.
This 0-ring rubber is petrol and temperature resistant.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
diameter: 5,28mm
material: high temperature and fuel resistant rubber, black
one piece will be needed
2,89 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8239
O-ring 9,25mm for carburettor
Detail
Special sealing ring as round packing cord as single part.
This 0-ring rubber is petrol and temperature resistant.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
diameter: 9,25mm
material: high temperature and fuel resistant rubber, black
one piece will be needed
2,58 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8238
O-ring 18mm for carburettor
Detail
Special sealing ring as round packing cord as single part.
This 0-ring rubber is petrol and temperature resistant.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
diameter: 18mm
material: high temperature and fuel resistant rubber, black
one piece will be needed
3,40 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8237
O-ring 29,5mm for carburettor
Detail
Special sealing ring as round packing cord as single part.
This 0-ring rubber is petrol and temperature resistant.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
diameter: 29,50mm
material: high temperature and fuel resistant rubber, black
one piece will be needed
2,64 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8236
O-ring 80mm for carburettor
Detail
Special sealing ring as round packing cord as single part.
This 0-ring rubber is petrol and temperature resistant.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
diameter: 80mm
material: high temperature and fuel resistant rubber, black
one piece will be needed
3,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8235
Aluminium-ring 10mm for carburettor
Detail
Special metal sealing sealing as single part.
This Aluring is extra made fur this carburettor umit.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
outside diameter: 10mm
inside diameter: 6,8mm
thickness: 1,2mm
material: aluminium selaning
one piece will be needed
3,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8262
Aluminium-ring 12mm for carburettor
Detail
Special metal sealing sealing as single part.
This Aluring is extra made fur this carburettor umit.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
outside diameter: 12mm
inside diameter: 7mm
thickness: 1mm
material: aluminium selaning
one piece will be needed
3,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8261
Aluminium-ring 13,8mm for carburettor
Detail
Special metal sealing sealing as single part.
This Aluring is extra made fur this carburettor umit.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
outside diameter: 13,8mm
inside diameter: 10,3mm
thickness: 1mm
material: aluminium selaning
one piece will be needed
3,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8263
Hose clip 8 - 12 / 7,5 stainless steel
Detail
Clip made of stainless steel for fuel hosed from diameter 8mm up to 12mm.
The wide of the clip is 7,5mm.
3,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6034
Hose clip 12 - 20 / 9
Detail
for fuel hose from D= 12mm up to 20mm.
the wide of the clip is 9mm.
1,30 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6036
Fuel pipe 8mm, copper pipe
Detail
Copper tube to use as fuel pipe to connect the fuel tank and the fuel pump. (suction line)
material: copper tube
size: 8x1
length: 5 meter
one piece will be needed
Preis pro Meter: 10,91 Euro
54,51 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 726
Delivery only at advance payment.
fuel pipe-return, 6mm, copper pipe
Detail
Copper tube to use as fuel pipe to connect the fuel pump and the fuel tank. (return flow line)
material: copper tube
size: 6x1
length: 5 meter
one piece will be needed
price per meter: 7,96 Euro
39,79 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 727
Delivery only at advance payment.
Gas separator
Detail
Gas separator between fuel pump and Carbrettor.
Fit for Trabant 1,1 and Wartburg 1,3 and Barkas B1000-1 four stroke motors.
material: rubber, black
one piece will be needed
12,91 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8656
Fuel pump * PIERBURG *
Detail
Machanical fuel pump as complete unit. Fit for 4-stroke four cylinder motor Wartburg 1,3, Trabant 1,1 and Barkas B1000-1
High quality fabricator: Pierburg
delivery without mounting bits
inclusive O-sealing
one piece will be needed
125,11 €
inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.
Art.No. 6328
Between pluger
Detail
Crinded and hardened bolt used at between pluger. Connection between engine block and fuel pump. Fit for Trabant 1,1 and Wartburg 1,3 four stroke motors.
material: steel, annealed
one piece will be needed
51,08 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6713
Sealing ring for fuel pump
Detail
Fuel resistant sealing for connection between engine block and fuel pump. Fit for Trabant 1,1 and Wartburg 1,3 and Barkas B1000-1 four stroke motors.
material: rubber, black
one piece will be needed
1,41 €
inclusive VAT, plus shipping costs
Delivery in 5 days.
Art.No. 7222
Delivery only at advance payment.
Fuel pump *1,1-W1,3-B1000-1*
Detail
Mechanical petrol pump complete to transer the petrol from the tank into the carburettor.
Fit for all 4 stroke models like Trabant 1.1, Wartburg 1.3 and Barkas B1000-1
one piece will be needed
made in EU
48,51 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 754
1+1
Membrane for fuel pump ( 5 hole system )
Detail
22,24 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 755
Membrane for fuel pump ( 6 hole system )
Detail
22,24 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 756
Fuel tank, overhauled
Detail
Overhauled tank for the Trabant 1.1
The petrol tank is an original spare part
scope of delivery: without any mounting parts
material: steel
made in Germany
434,00 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 1237
Hose for fuel tank
Detail
Petrol resistant rubber hose for the connection between fuel filling orifice and
gas tank at the Trabant 1,1.
Fit to all types like Limousine, Universal (station wagon) and Tramp.
The form hose is 30 degrees angled
Material: fuel resitant rubber, black
reproduction, EU
19,75 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 1238
Transmitter for fuel gauge
Detail
Sensor for fuel gauge with potentiometer for connection to all offert fuel gauges. Complete with rubber sealing and float.
made in Germany
one piece will be needed
46,08 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 1234
Sealing for Transmitter for fuel gauge
Detail
Rubber seal special made for the transmitter for fuel gauge of the fuel tank Trabant 1.1. Fuel resistant rubber.
Reproduction in good quality.
colour: black
one piece will be needed
made in EU
17,03 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 7801
Mounting srews forTransmitter for fuel gauge
Detail
One kit of mounting bolts for the transmitter for fuel gauge at the fuel tank Trabant 1.1.
screws and washer
steel, galvaniced
one set will be needed
2,50 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8668
Vents hose for fuel tank, rubber
Detail
Petrol resistant rubber hose with texture for the connection between fuel filling orifice and gas tank to vent the fuel system.
price per meter
colour: black
material: fuel resistant rubber
inside diameter: 12mm
outside diameter: 18mm
Trabant 1.1, Wartburg 353 und Wartburg 1.3
price 7,32 Euro / meter
7,32 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7428
Vent hose for Fuel tank, clear
Detail
Ventelation hose for the connection between petrol tank and filling pipe of the Trabant 1.1
price per meter
scope of delivery: inclusive two mounting clamps
material: PVC
made in Germany
4,50 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6930
Fuel tank plug, lookable
Detail
Plug for the Trabant 1.1 fuel tank.
Delivery inclusive 2 keys.
25,94 €
inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.
Art.No. 1239
Delivery only at advance payment.
Petrol filter universal
Detail
Gasoline filter for the universal duty.
The filter will be mounted between the fuel line.
connection diameter: 6 and 8mm
material: petrol resistant plastic with parer filter
price per piece
3,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7224
Texture-fuel hose 6mm and clamps
Fuel hose, 5,5 mm with texture
Detail
Flexible fuel hose with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
inside diameter: 5,5mm
material: petrol resistant rubber with outside texture
made in Germany
priece per Meter: 5,14 Euro
5,14 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 728
Hose clip for fuel hose 5,5 mm with texture
Detail
Clamp for flexible fuel hose (5,5mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
max.diameter: 11mm
wide: 9mm
re-usable
1,47 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6197
Hose clip for fuel hose, 8 mm with texture
Detail
Clamp fpr flexible fuel hose (5,5mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
max.diameter: 12 mm
wide: 8,5mm
re-usable
1,25 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6203
Hose clip 7 - 11 / 5 stainless steel
Detail
Hose clips made of stainless steel, for fuel hoses from diameter 7mm up to 11mm.
The wide of the clip is 5mm.
2,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6035
Texture fuel hose 8mm and clamps
Fuel hose, 8 mm (insde diameter)
Detail
Flexible fuel hose with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
inside diameter: 8 mm
material: petrol resistant rubber with outside texture
made in Germany
priece per Meter: 6,22 Euro
6,22 €
inclusive VAT, plus shipping costs
Delivery in 5 days.
Art.No. 729
Delivery only at advance payment.
Hose clip for fuel hose, 8 mm with texture
Detail
Clamp fpr flexible fuel hose (8mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
max.diameter: 13mm
wide: 9mm
re-usable
1,89 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8159
Hose clip for fuel hose, 8 mm with texture
Detail
Clamp fpr flexible fuel hose (8mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
max.diameter: 13 mm
wide: 9,5mm
re-usable
1,35 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8160
Rubber fuel hose and clamps
Rubber Fuel hose, 6 mm
Detail
Flexible fuel hose with inside texture and rubber surface.
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
inside diameter: 5,5 mm
material: petrol resistant rubber with inside texture
made in Germany
priece per meter: 4,93 Euro
4,93 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7113
Hose clip for fuel hose 6 mm with rubber surface
Detail
Clamp fpr flexible fuel hose (6mm inside diameter) with inside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
max.diameter: 12mm
wide: 9mm
re-usable
1,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8162
Hose clip for fuel hose, 6 mm with rubber surface
Detail
Clamp fpr flexible fuel hose (6mm inside diameter).
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
max.diameter: 12 mm
wide: 8,5mm
re-usable
1,05 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8161
Rubber fuel hose and clamps
Rubber Fuel hose, 7,5 mm
Detail
Flexible fuel hose with inside texture and rubber surface. Inside diameter 7,5mm.
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
inside diameter: 7,5 mm
material: petrol resistant rubber with inside texture
made in Germany
price per meter: 5,10 Euro
5,10 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6308
Hose clip for fuel hose 7,5 mm with rubber surface
Detail
Clamp fpr flexible fuel hose (7,5mm inside diameter) with inside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
max.diameter: 14mm
wide: 9mm
re-usable
1,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8163
Hose clip for fuel hose, 7,5 mm with rubber surface
Detail
Clamp fpr flexible fuel hose (8mm inside diameter).
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
max.diameter: 14 mm
wide: 8,5mm
re-usable
1,05 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8164
Polyamid fuel pipe 8 x 1, price per meter
Detail
Fuel line 8 x 1 mm
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
outer diameter:
8 mm
inner diameter:
6 mm
wall thickness:
1 mm
price is for one meter (max. 20 meter in one piece)
special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.
price 4,80 Euro / meter
4,80 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6033
Polyamid fuel pipe 6 x 1, price per meter
Detail
Fuel line 6 x 1 mm, most vehicles used as rear flow pipe for the petrol pump.
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
outer diameter:
6 mm
inner diameter:
4 mm
wall thickness:
1 mm
price is for one meter (max. 20 meter in one piece)
special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.
Bitte beachten: abgelängte Ware auf Kundenwunsch, keine Rücknahme oder Umtausch!
4,50 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7513
Polyamid fuel line 8 x 1
Detail
Fuel line 8 x 1 mm
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
outer diameter:
8 mm
inner diameter:
6 mm
wall thickness:
1 mm
price is for one meter (max. 20 meter in one piece)
special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.
price per meter: 3,80 Euro
19,00 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6032
Delivery only at advance payment.
Polyamid fuel line 6 x 1
Detail
Fuel line 6 x 1 mm, most vehicles used as rear flow pipe for the petrol pump.
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
outer diameter:
6 mm
inner diameter:
4 mm
wall thickness:
1 mm
price is for one meter (max. 20 meter in one piece)
special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.
price per meter: 3,20 Euro
16,00 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7514
Reinforcement bushing for fuel pipe 8 x 1
Detail
reinforcement bushing for our polyamide fuel pipe 8 x 1 (Art.No.:
6032
and
6033
)
material: brass
It should be uesed for every connection between polyamid fuel pipe and fuel hose!
mor informations:
see details
0,27 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6305
Reinforcement bushing for fuel pipe6 x 1
Detail
reinforcement bushing for our polyamide fuel pipe 8 x 1 (Art.No.:
7513
and
7514
)
material: brass
It should be uesed for every connection between polyamid fuel pipe and fuel hose!
mor informations:
see details
0,27 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7515
Sealing for transmitter fuel gauge
Detail
Rubber seal for the sensor of the fuel gauge as an single part.
Fit to all vehicle models: Trabant 601, Trabant 1.1, Wartburg 353, Wartburg 1.3, Brakas B1000, Barkas B1000-1, Multicar.
material: fuel resistant rubber, colour: black
made in Germany
one piece will be needed
4,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7461
Float for transmitter fuel gauge
Detail
Plastic float for the sensor of the fuel gauge as an single part.
Fit to all vehicle models: Trabant 601, Trabant 1.1, Wartburg 353, Wartburg 1.3, Brakas B1000, Barkas B1000-1, Multicar.
material: fuel resistant plastic, colour: withe
made in Germany
one piece will be needed
25,90 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 7460
Ring eye D12mm, connection 8mm hose
Detail
Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm
Eye diameter: 12mm
diameter pipe connection: 8mm
5,95 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7540
Ring eye D12mm with pipe bend
Detail
Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm
Eye diameter: 12mm
diameter pipe connection: 8mm
pipe bend: 90 degree
pipe length total: 74mm
15,38 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7517
Ring eye D12mm, connection 6mm hose
Detail
Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm
Eye diameter: 12mm
diameter pipe connection: 6mm
4,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7539
Ring eye D10mm, connection 8mm hose
Detail
Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm
Eye diameter: 10mm
diameter pipe connection: 8mm
4,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7538
Ring eye D10mm with pipe bend
Detail
Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm
Eye diameter: 10mm
diameter pipe connection: 6mm
pipe bend: 90 degree
pipe length total: 55mm
14,99 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7516
Ring eye D10mm, connection 6mm hose
Detail
Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm
Eye diameter: 10mm
diameter pipe connection: 6mm
4,60 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7537
fuel stabiliser, 250ml
Detail
for trouble free over-wintering of engines and fuel tanks.
The volume of the boddle protect 50 liter petrol.
priece per Liter: 59,72 Euro
14,93 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6671
Paper sealing for electrical mixture preheater
Detail
Upper paper seal for the electrical mixture preheater.
Fit to Trabant 1.1 and Wartburg 1.3
material: sealing paper
high quality reproduction
3,94 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7971
Electrical mixture preheater
Detail
electrical mixture preheater for Trabant 1.1 and Wartburg 1.3
96,10 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 801
Sealing ring for electrical mixture preheater
Detail
Special sealing ring for the electrical mixture preheater.
Fit to Trabant 1.1 and Wartburg 1.3
material: sealing rubber
high quality reproduction
9,36 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7976
Between flange
Detail
Rubber-metal sealing between sucition pipe and carburettor.
With the four pre installed bolts, the sealing will be mounted on top of the suction pipe.
fit for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1
one piece will be needed
74,12 €
inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.
Art.No. 6127
Petrol filter 42mm, universal
Detail
Gasoline filter for the universal duty.
The filter will be mounted between the fuel line.
connection diameter: 6 and 8mm
material: petrol resistant plastic with parer filter
price per piece
3,11 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8642
The complete offer in fuel system
* All prices inclusive VAT and plus
shipping costs
.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas