This site in german: Trabant 1.1 > Ersatzteile > Motor 
You are here: > Trabant 1.1> Spare parts> Engine
Navigation

Engine

Category Engine has the following subcategorys:

The product category Trabant 1.1 > Spare parts > Engine is spread over 6 sites:

123456
Show all products

Crankshaft gear

Crankshaft gear for toothed belt. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • made in Germany
  • number of theeth: 44
  • one piece will be needed
91,11 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 7262
Delivery only at advance payment.

Bolt for crankshaft gear

High grade special bolt for the mounting of the crankshaft gear for toothed belt. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • one piece will be needed
  • made in Germany
5,41 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7482
Delivery only at advance payment.

Bolt for V-pully crankschaft

Bolt with hexagon socket for the mounting of the V-pully at the crankshaft gear for toothed belt.
Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • four pieces will be needed
  • made in Germany
2,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7484

Camshaft timing gear

Timing gear for toothed belt camshaft. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • made in Germany
  • number of theeth: 44
  • one piece will be needed
52,22 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7261

Ring gear for starter

Starter gear to mount at the 4-stroke engine fly wheel.
  • Fit to the vehicles: Trabant 1.1, Wartburg 1.3 and
    Barkas B1000-1
  • 113 theeth
  • inside diameter: 212mm
  • wide: 8mm
  • made in EU
84,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 686

breather hose down, crankcase ventilation

rubber form hose to put between breather connection of crankcase and oil separator
  • inner diameter: 18 mm
  • outer diameter: 26 mm
  • length before bending: ca. 29 cm
22,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 724

breather hose upper side, crankcase ventilation

rubber form hose to put between oil separator and suction pipe
  • inner diameter: 18 mm
  • outer diameter: 26 mm
  • length before bending: ca. 14,5 cm
22,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 725

V-belt AVX 10 x 700

Alternator belt fit to Wartburg 1,3, Trabant 1,1 and Barkas B1000-1.
  • dimensions: 10mm wide, 700mm long
  • made in England
7,61 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1106
Delivery only at advance payment.

Toothed belt 108 / 19,1

The toothed belt fit to Trabant 1,1 and Wartburg 1,3 and Barkas B1000-1 as well.
The timing belt will be delivered as an single part, without any mounting parts.
  • wide: 19,1mm (3/4 inch)
  • count of teeth: 108
17,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1107
The product category Trabant 1.1 > Spare parts > Engine is spread over 6 sites:
123456
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Spielfiguren von Bullyland | Spielzeugfiguren