This site in german: Trabant 1.1 > Ersatzteile > Motor 
You are here: > Trabant 1.1> Spare parts> Engine
Navigation

Engine

Category Engine has the following subcategorys:

The complete offer in Engine

Oel filter

Fit to Trabant 1,l and 1,3 engine (Wartburg and Barkas B1000-1). Scope of delivery inclusive sealing ring.
  • made in Germany
  • one piece will be needed
9,78 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1102

Screw for oel drain SW19

Oel drain screw plug. Fit to all oilsump of Trabant 1,1 and wartburg 1,3. Produced by FEBI.
  • spanner size: SW19
  • made in Germany
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
2,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7128

seal ring for oel drain screw plug

copper seal ring for oel drain screw plug. Fit to all oilsump of Trabant 1,1 and wartburg 1,3. Produced by ELRING.
  • dimensions: 14 x 20x 1,5
  • made in Germany
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
0,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6426

Oilsump

Oil sump fit to all oilsump of Trabant 1,1 and wartburg 1,3 with four stroke engine
  • material: metal
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
91,61 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7129

Chain Oil pump

Chain for the support of the Oilpump fit to all oilsump of Trabant 1,1 and wartburg 1,3 with four stroke engine
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
19,83 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7134

Oil pump

Oilpump fit to all oilsump of Trabant 1,1 and wartburg 1,3 with four stroke engine
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
178,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7133

Bleeder for crank case

Breather mounted at the crank case down of the Trabant 1.1,Wartburg 1.3 and Barkas B1000-1 with four stroke engine.
New original spare part.
  • fit also to many engines from VW (engine block 1100)
  • one piece will be needed
67,98 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7480

Seal for oil pan

Oelsump seal fit to 4-stroke engine of Trabant 1.1 and Wartburg 1.3.
Approved quality made by ELRING. It is the seal between oil sump and engine block.
  • material: chaded spezial-sealing paper
  • made in Germany
  • one piece will be needed
21,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6342

Seal for oel pan

Very reasonable Seal for oel sump with medium quality. Fit to 4-stroke engine of Trabant 1.1 and Wartburg 1.3.The seal between oil sump and engine block.
  • Material:chaded sealing paper
  • made in EU
  • one piece will be needed
9,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 634

Sealing kit engine block down

Complete kit for the engine block. Fit to 4-stroke engine of Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
Made by Eling.
98,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7485
1+1
Engine retainer

Socked spring

Sleeve spring (round) have to be pressed in the support for engine or gerabox retainer.
  • outside diameter: 75mm
  • length: 55mm
  • length of the mounting bushing inside: 68mm
  • diameter of the mounting bushing inside: 11mm
  • Trabant 1,1 one piece will be needed for engine-gerbox support front left hand
  • Wartburg 1,3 two pieces will be needed for engine support front and for gearbox support rear
70,77 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 635

Socked spring - eccentric

Sleeve spring (round-eccentric) have to be pressed in the engine-gearbox support

  • Trabant 1,1 one piece will be needed for engine support rear
88,18 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 636

Twin bearing

Rubber spring front for engine Trabant 1,1. The bearing is screwed direct at the under frame.

  • one piece will be needed
42,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 447

Under-frame

Underframe for Trabant 1,1
The part is complete checked, sandblasted, undercoated (primed), and varnished (black).
295,00 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 446

Mounting screw under frame

Mounting bolt for the connection between underframe and front transverse member.
Scope of delivery inclusive external teeth lock washer and nut.
  • grade: 10.9
  • surface: galvaniced
  • for the Trabant 500,600,601 will be 6 pieces needed
  • for the Trabant 1,1 will be four pieces needed
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6746

Engine block

Single part without any add-on components.
The block can be used for the vehicles Trabant 1.1, Wartburg 1.3 or Barkas B1000-1.
Brand new spare part, zero mark for pistons are possibe to hone.
800,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7421

Piston ring set (zero mark)

One set of piston rings consitst of:
4x piston ring 75 x 1,75mm
4x piston ring 75 x 2mm
4x oil scraper ring 75 x 3mm
Fit to all four strok engines Trabat 1.1, Wartburg 1.3, and Barkas B1000-1.
  • high quality made in Germany
  • one set will be needed
  • useable for the bore size: 75,000mm
135,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7835

Engine for Wartburg 1,3 or Trabant 1,1

you have to send your engine to our company and we will overhaul it complete.

Bolt for flywheel

Special bolt for flywheel mounting.
Fit to the engines of the vehicles Trabant 1.1, Wartburg 1.3 or Barkas B1000-1.
  • 6 pieces will be needed
  • with dry threadlocker
  • grade: 12.9
  • made in Germany
2,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7422
Sealing crankshaft flywheel side

radial sealing for crank shaft (side of flywheel) 85 x 105 x 12

Sealing ring for Trabant 1.1 and Wartburg 1.3 engine cluch side.
High quality with additional dust lip.
The dust lip protect the oil stripe lip for abrasion of the cluch.
  • size: 85x105x12
  • made in Germany
  • one piece will be needed
13,04 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6132

radial sealing for crank shaft (side of flywheel) 85 x 105 x 11 *ELRING*

radial sealing for one side of crankshaft (side of flywheel)
fit to Trabant 1.1 and Wartburg 1.3

Best available type of Radial sealing 85 x 105 x 11 with:
  • dust lip
  • left spin
  • higher working temperatur range
  • approved ELRING quality

  • inner diameter: 85 mm
  • outer diameter: 105 mm
  • width: 11 mm
  • material: Viton/Polyacryl-rubber

new produced
19,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6343

Cover sealing flywheel side

Spezial paper seal for the metal cover od the radial sealing for one side of crankshaft (side of flywheel)
fit to Trabant 1.1 and Wartburg 1.3
  • made in Germany
  • one piece will be needed
4,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7050
Sealing crankshaft timing belt side

Radial sealing for camshaft and crankshaft ( 32 x 47 x 10) with dust lip *ELRING*

radial sealing for camshaft and one side (side of belt) of crankshaft
fit to Trabant 1.1, Wartburg 1.3 and Barkas B1000-1
Made by ELRING

Best available type of Radial sealing 32 x 47 x 10 with additional dust lip, dual spin and higher working temperatur range.
  • inner diameter: 32 mm
  • outer diameter: 47 mm
  • width: 10 mm
  • material: Viton/Polyacryl-rubber
13,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6341

Radial sealing for camshaft and crankshaft( 32 x 47 x 10)

radial sealing for camshaft of Trabant 1.1 and Wartburg 1.3
The simplest and cheapest typ WITHOUT dust lip.
  • size: 32x47x10
  • made in Germany
5,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 629

Radial sealing for camshaft and crankshaft ( 32 x 47 x 10) with dust lip

radial sealing for camshaft and one side of crankshaft of Trabant 1.1 and Wartburg 1.3
more professional type of Art.No.629 (Radial sealing for camshaft (32 x 47 x 10)) with additional dust lip
  • size: 32x47x10
  • made in Germany
9,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6340

Cover sealing pullywheel side

Spezial paper seal for the metal cover od the radial sealing for one side of crankshaft (side of toothed belt)
fit to Trabant 1.1 and Wartburg 1.3
  • made in Germany
  • one piece will be needed
9,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7051

Crankshaft gear

Crankshaft gear for toothed belt. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • made in Germany
  • number of theeth: 44
  • one piece will be needed
91,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7262

Bolt for crankshaft gear

High grade special bolt for the mounting of the crankshaft gear for toothed belt. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • one piece will be needed
  • made in Germany
5,41 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7482

Bolt for V-pully crankschaft

Bolt with hexagon socket for the mounting of the V-pully at the crankshaft gear for toothed belt.
Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • four pieces will be needed
  • made in Germany
2,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7484

Camshaft timing gear

Timing gear for toothed belt camshaft. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • made in Germany
  • number of theeth: 44
  • one piece will be needed
52,22 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7261

Ring gear for starter

Starter gear to mount at the 4-stroke engine fly wheel.
  • Fit to the vehicles: Trabant 1.1, Wartburg 1.3 and
    Barkas B1000-1
  • 113 theeth
  • inside diameter: 212mm
  • wide: 8mm
  • made in EU
84,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 686

breather hose down, crankcase ventilation

rubber form hose to put between breather connection of crankcase and oil separator
  • inner diameter: 18 mm
  • outer diameter: 26 mm
  • length before bending: ca. 29 cm
22,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 724

breather hose upper side, crankcase ventilation

rubber form hose to put between oil separator and suction pipe
  • inner diameter: 18 mm
  • outer diameter: 26 mm
  • length before bending: ca. 14,5 cm
22,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 725

V-belt AVX 10 x 700

Alternator belt fit to Wartburg 1,3, Trabant 1,1 and Barkas B1000-1.
  • dimensions: 10mm wide, 700mm long
  • made in England
7,61 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1106

Toothed belt 108 / 19,1

The toothed belt fit to Trabant 1,1 and Wartburg 1,3 and Barkas B1000-1 as well.
The timing belt will be delivered as an single part, without any mounting parts.
  • wide: 19,1mm (3/4 inch)
  • count of teeth: 108
17,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1107

Fan frame

21,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1243

Hose for air-intake

Fresh air intake rubber hose.
54,11 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 1244

Hose for warm air-intake

Rubber hose for warm air-intake
will be used to connect regulator box and nozzle of cover plate for exhaust manifold
49,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1245

Electrical mixture preheater

electrical mixture preheater for Trabant 1.1 and Wartburg 1.3
96,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 801

Paper sealing for electrical mixture preheater

Upper paper seal for the electrical mixture preheater.
Fit to Trabant 1.1 and Wartburg 1.3
  • material: sealing paper
  • high quality reproduction
3,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7971

Sealing ring for electrical mixture preheater

Special sealing ring for the electrical mixture preheater.
Fit to Trabant 1.1 and Wartburg 1.3
  • material: sealing rubber
  • high quality reproduction
9,36 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7976

controller-unit for overrun cut-off (T1.1/W1.3)

Electronical control unit for overrun cut-off of 4-stroke engines of Trabant or Wartburg.
Discontinues the fuel supply during overrun. Works in tandem with Switch for throttle valve und tick-over valve
81,29 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6489

ADDINOL 4 stroke motor oil SAE 10W-40, 1 litre

ADDINOL SEMI SYNTH SAE 10W-40
for Trabant 1.1, Wartburg 1.3 and most other motors from VAG-combine (Audi, VW, Seat, Skoda)
particulate with synthetic oil
no sheer minerally oil
contens: 1 Litre
Additional comment: Notes for used oil disposalLink opens in a new window.
15,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6248

ADDINOL 4 stroke motor oil SAE 10W-40, 4 litre

ADDINOL SEMI SYNTH SAE 10W-40
for Trabant 1.1, Wartburg 1.3 and most other motors from VAG-combine (Audi, VW, Seat, Skoda)
particulate with synthetic oil
no sheer minerally oil
contens: 4 Litre
Additional comment: Notes for used oil disposalLink opens in a new window.
price: 10,95 Euro for each Liter
43,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6249

ADDINOL FLUSHING OIL SUPER, 0,5l

ADDINOL FLUSHING OIL SUPER
The perfect inside cleaner for engines of Trabant 1.1, Wartburg 1.3 and most other 4-stroke engines

contens: 0,5 Litre (sufficent for appr. 5 L engine oil filling)
  • proper flushing guarantees complete removal of used oil and maximum cleanliness of the engine
  • dissolves sludge and solids
  • Power Conditioner increasing the engine output
13,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6889

ADDINOL 4 stroke motor oil SAE 10W-40, 20 litre

ADDINOL SEMI SYNTH SAE 10W-40
for Trabant 1.1, Wartburg 1.3 and most other motors from VAG-combine (Audi, VW, Seat, Skoda)
particulate with synthetic oil
no sheer minerally oil
contens: 20 Litre
price: 7,21 Euro for 1 Liter
144,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6250

Exhaust manifold seal

Simple construction of the manifold seal. Material graphite texture paper.
Splitted seal (that is one exhaust manifold seal for two cylinder)
  • sealing between outlet side of the cylinder head and the exhaust manifold
  • fit to Trabant 1.1, Wartburg 1.3 und B1000-1 - bouth of this motors have got an cross streem cylinder head
  • scope of delivery one paar (2 pieces)
reduced from 5,64 € to 4,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 31

Exhaust manifold seal with meatl ring

Better construction of the manifold seal. Material graphite texture paper with metal pressing ring for each cylinder.
Splitted seal (that is one exhaust manifold seal for two cylinder)
  • made in Germany by Elring
  • sealing between outlet side of the cylinder head and the exhaust manifold
  • fit to Trabant 1.1, Wartburg 1.3 and Barkas B1000-1- all of this motors have got an cross streem cylinder head
  • scope of delivery one paar (2 pieces)
Special offer normaly 18,77 € now 16,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6260

Seal for water pipe

Paper sealing for the cooling water pipe connection to the engine block, rear side water pump.
Fit ot Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 with four stroke engines.
  • made in Germany
2,65 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7483

Piston ring pliers

Piston ring mounting and demounting tool.
With this pliers the changing of the piston rings will be simple and save, because the rins are retained at the outside.
  • working dimensions: 1-100mm
  • surface: nickel-plated
  • with blue plastic handles
  • made in Germany
35,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7619
The complete offer in Engine

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas