This site in german: Trabant 1.1 > Ersatzteile > Motor > Kühlsystem 
You are here: > Trabant 1.1> Spare parts> Engine> cooling system
Navigation

cooling system

The product category Trabant 1.1 > Spare parts > Engine > cooling system is spread over 5 sites:

12345
Show all products

blow off valve for compensating tank, 100kPa (T1.1)

Blow off valve for cooling water tank of Trabant 1,1.
It will be mounted under the reservior cap.
  • pressure: 100kPa
  • made in EU
  • one piece will be needed
13,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 720

compensating tank complete

coolant bottle for Trabant 1.1, delivery without closure and valve
  • original spare part
35,20 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 719

Hose connector 19mm, universal

Universal useable plastic connection tube for coolant hoses.
Best use for reparations of demaged hoses or tuning and modifications z.B. Trabant with Wartburg engine or VW engines.
Easy to install, just push the two ends of the hoses at tube and fix it with two clamps.
technical details:
  • diameter: 19mm
  • lenght of the connection side: 32mm
  • legth total: 75mm
  • material: plastic, temperatur and oel restistant, whithe
3,18 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7432

Radiator hose set Trabant 1,1

Complete set oft coolant hoses to for the Trabant 1,1
Fit to all types like Limousine, station wagon and Tramp.
Scope of delivery:
  • 1x radiator hose: Di=10mm, length: 810mm
  • 1x radiator hose: Di=15mm, length: 470mm
  • 1x radiator hose: Di=15mm, length: 570mm
  • 1x radiator hose: Di=15mm, length: 730mm
  • 1x radiator form hose: Di=12mm, length: 360mm
  • 1x radiator form hose: Di=12mm, length: 420mm
  • 1x radiator form hose: Di=18mm, length: 240mm
  • 1x radiator form hose: Di=18mm, length: 260mm
  • 1x radiator form hose: Di=18mm, length: 300mm
  • 1x radiator form hose: Di=30mm, length: 240mm
  • 1x radiator form hose: Di=30mm, length: 470mm
  • 1x radiator form hose: Di=30mm, length: 480mm
99,48 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8117

Clamp set for radiator hose, Trabant 1,1

Set oft hose clamps for coolant hoses Trabant 1,1
Fit to all types like Limousine, station wagon and Tramp.
Scope of delivery:
  • one kit will be needed
28,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8620

compensating tank complete, universal

universal useable coolant bottle.
Scope of delivery complete with closure cap and integreated valve and switch for fluid lavel.
Two connections for the water hoses.
diamter connection down: 15mm
diamter connection on top: 8mm
Brillant replacement for the original spare part. Can be used for tuning and modificatios for example: Trabant with Wartburg engine or VW engines
41,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7430

Coolant hose compensating tank - engine

Cooling water hose for connection between compensating tank (uppper side) and engine block.
Fit to Trabant 1,1 with 1100 ccm four stroke engine.
  • inside diameter: 17 mm
  • outside diameter: 26 mm
  • lenght: ca.38 cm
  • one piece will be needed

To depicting of the spare part place (technical exploded view) please click on the details.
11,24 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6646

Coolant hose compensating tank - radiator

Cooling water hose for connection between compensating tank and radiator.
Fit to Trabant 1,1 with 1100 ccm four stroke engine.
  • inside diameter: 10 mm
  • outside diameter: 19 mm
  • lenght: ca.86 cm
  • one piece will be needed

To depicting of the spare part place (technical exploded view) please click on the details.
14,34 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6647

Thermostat

These calorstat are fit for Trabant 1.1 and Wartburg 1.3.
Scope of delivery inclusive rubber sealing ring, which should be changed at every demounting of the thermal switches.
  • Reproduction in Germany
  • open up temperature: 84°C
  • basic diameter: 54 mm
  • valve diameter: 35 mm
  • length closed phase: 34mm
  • round sealing: 4x50x58
  • made in Germany
  • one piece will be needed
22,70 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 6418
Delivery only at advance payment.

Rubber seal for thermostat

O-ring seal for mechanical thermal switch. The seal should be changed after every demounting of the heat governor.
  • material: rubber
  • form: round
  • diameter: 4 mm x50 mm x 58 mm
  • one piece will be needed
1,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 722
The product category Trabant 1.1 > Spare parts > Engine > cooling system is spread over 5 sites:
12345
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Holzspielzeug