This site in german: Trabant 1.1 > Ersatzteile > Motor > Vergaser 
You are here: > Trabant 1.1> Spare parts> Engine> carburettor

carburettor

The product category Trabant 1.1 > Spare parts > Engine > carburettor is spread over 6 sites:

Sealing ring for electrical mixture preheater

Special sealing ring for the electrical mixture preheater.
Fit to Trabant 1.1 and Wartburg 1.3
  • material: sealing rubber
  • high quality reproduction
9,36 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7976

Paper sealing for electrical mixture preheater

Upper paper seal for the electrical mixture preheater.
Fit to Trabant 1.1 and Wartburg 1.3
  • material: sealing paper
  • high quality reproduction
3,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7971

Electrical mixture preheater

electrical mixture preheater for Trabant 1.1 and Wartburg 1.3
66,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 801

Thermo switch

Thermostat is mounted in thermotat housing
The thermo switch is a earthless closed-circuit current switch for warm running automatic.
It open if cooling water temperature is about 60°C.
27,13 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 850

Rubber Fuel hose, 6 mm

Flexible fuel hose with inside texture and rubber surface.
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
  • inside diameter: 5,5 mm
  • material: petrol resistant rubber with inside texture
  • made in Germany
priece per meter: 4,93 Euro
4,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7113

Rubber Fuel hose, 7,5 mm

Flexible fuel hose with inside texture and rubber surface. Inside diameter 7,5mm.
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
  • inside diameter: 7,5 mm
  • material: petrol resistant rubber with inside texture
  • made in Germany
price per meter: 5,10 Euro
5,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6308

Fuel hose, 5,5 mm with texture

Flexible fuel hose with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
  • inside diameter: 5,5mm
  • material: petrol resistant rubber with outside texture
  • made in Germany
priece per Meter: 5,14 Euro
5,14 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 728

Petrol filter universal

Gasoline filter for the universal duty.
The filter will be mounted between the fuel line.
  • connection diameter: 6 and 8mm
  • material: petrol resistant plastic with parer filter
  • price per piece
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7224

Hose clip for fuel hose, 8 mm with texture

Clamp fpr flexible fuel hose (8mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 13mm
  • wide: 9mm
  • re-usable
1,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8159

Fuel hose, 8 mm (insde diameter)

Flexible fuel hose with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
  • inside diameter: 8 mm
  • material: petrol resistant rubber with outside texture
  • made in Germany
priece per Meter: 6,22 Euro
6,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 729

Hose clip for fuel hose, 6 mm with rubber surface

Clamp fpr flexible fuel hose (6mm inside diameter).
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 12 mm
  • wide: 8,5mm
  • re-usable
1,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8161

Hose clip for fuel hose, 7,5 mm with rubber surface

Clamp fpr flexible fuel hose (8mm inside diameter).
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 14 mm
  • wide: 8,5mm
  • re-usable
1,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8164

Hose clip for fuel hose, 8 mm with texture

Clamp fpr flexible fuel hose (8mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 13 mm
  • wide: 9,5mm
  • re-usable
1,35 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8160

The product category Trabant 1.1 > Spare parts > Engine > carburettor is spread over 6 sites:
123456
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Spielfiguren