This site in german: Trabant 1.1 > Ersatzteile > Motor > Vergaser 
You are here: > Trabant 1.1> Spare parts> Engine> carburettor

carburettor

The product category Trabant 1.1 > Spare parts > Engine > carburettor is spread over 6 sites:

Tick-over valve

Control unit for handling the overrun cut-off at the four stroke engine.
Fit to the following vehicles with the carburettor types:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1
73,42 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 757

controller-unit for overrun cut-off (T1.1/W1.3)

Electronical control unit for overrun cut-off of 4-stroke engines of Trabant or Wartburg.
Discontinues the fuel supply during overrun. Works in tandem with Switch for throttle valve und tick-over valve
81,29 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6489

Switch for throttle valve

Switch for overrun cut-off.
Fit to Trabant 1,1 and Wartburg 1,3 carburettor.
Original spare part
9,71 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6649

Carburettor bowdencable

Accelerate control cable for the Trabant 1,1 with four stroke engine.
length total: 990mm
length cover: 760mm
  • one piece will be needed
  • with adjusting screw at the carburettor side
14,46 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 749

Pin bolt for suction pipe

Connection between cylinder head and suction pipe.,
  • delivery as single part
  • dimension: M8 x 42mm
  • threat lenght 1: about 16mm
  • threat lenght 2: about 19mm
  • High quality made in Germany
  • fit for Trabant 1,1 all types, Wartburg 1,3 all types and Barkas B1000-1
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7667

Pin bolt for exhaust maifold

1,59 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7668

Sealing for suction pipe, Elring

Spezail seal made of steel. Mounting between suction pipe and engine block.
This sealing is made of one piece for all four cylinders.
Fir for the Trabant 1,1 engine with 1100cccm and for Wartburg / Barkas B1000-1 engines with 1300ccm.
  • Manufacturer: ELRING
  • fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1
  • one piece will be needed
8,03 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 758

Sealing for suction pipe, Reinz

Spezail seal made of steel. Mounting between suction pipe and engine block.
This sealing is made of one piece for all four cylinders.
Fir for the Trabant 1,1 engine with 1100cccm and for Wartburg / Barkas B1000-1 engines with 1300ccm.
  • Manufacturer: Reinz
  • fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1
  • one piece will be needed
3,24 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8328

Suction pipe

Intake manifold with water cooling ports for the Trabant 1,1 and Wartburg 1,3 with carburettor engines. delivery without any mounting parts, seals ec.
  • Suction for all cylinders 1 in 4
  • material: aluminium
  • made in Germany
  • one piece will be needed
95,01 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 759

Between flange

Rubber-metal sealing between sucition pipe and carburettor.
With the four pre installed bolts, the sealing will be mounted on top of the suction pipe.
  • fit for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1
  • one piece will be needed
74,12 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6127
The product category Trabant 1.1 > Spare parts > Engine > carburettor is spread over 6 sites:
123456
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Spielfiguren