This site in german: Trabant 1.1 > Ersatzteile > Karosserie 
You are here: > Trabant 1.1> Spare parts> Body

Body

Category Body has the following subcategorys:

The product category Trabant 1.1 > Spare parts > Body is spread over 10 sites:

Snap-in plug for side member

Plug for round holes in car bodys with a diameter of 22 mm (0,87 inch) and with wall thickness from 0,8 mm up to 2,0 mm.

four pieces needed for each Trabant

  • Material: thermoplastic rubber
  • Colour: black
  • Permanent operation temperature: -40°C - 135°C (temporary up to +150°C)

This type of grommet is very good to mount and demount, excellent for recurrent check and working of inner side of car body. This plug has a height of 5 mm.
0,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 455

Rubber plug for side member, flat

Plug for round holes in car bodys with a diameter of 22 mm (0,87 inch) and with wall thickness up to 2,4 mm (0,095 inch).

four pieces needed for each Trabant

  • Material: PVC
  • Colour: black

This type of plug is a little bit more difficile to mount and demount than the snap-in plug. This plug has a height of about 3 mm in the centre and leveling off to the border. So it has a very smooth lookout.
0,82 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6929

Rubber membrane plug for holes with diameter of 15mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 15 mm
inner diameter of membrane (max. usable diameter): 9 mm
outer diameter (total): 20 mm
0,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6796

Rubber membrane plug for holes with diameter of 18,5mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 18,5 mm (0,728")
inner diameter of membrane (max. usable diameter): 11 mm (0,433")
outer diameter (total): 23 mm (0,906")
0,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6895

Rubber membrane plug for holes with diameter of 20,5mm

Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 20,5 mm
inner diameter of membrane (max. usable diameter): 13,5 mm
outer diameter (total): 25 mm
thickness: 7 mm
1,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6797

Rubber membrane plug for holes with diameter of 28mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 28 mm
inner diameter of membrane (max. usable diameter): 21 mm
outer diameter (total): 35 mm
1,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6798

Rubber membrane plug for holes with diameter of 47mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
  • fit to hole diameter of 47 mm
  • inner diameter of membrane (max. usable diameter): 36 mm
  • outer diameter (total): 54 mm
  • thicknes of the menbrane: 1mm
  • total thickness: 10mm
2,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6800

Rubber membrane plug for holes with diameter of 37mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 37 mm
inner diameter of membrane (max. usable diameter): 29 mm
outer diameter (total): 44 mm
1,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6799

Rubber membrane plug for holes with diameter of 32mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
  • fit to hole diameter of 32 mm
  • inner diameter of membrane (max. usable diameter): 25 mm
  • outer diameter (total): 39 mm
  • thicknes of the menbrane: 1mm
  • total thickness: 9mm
2,23 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7613
1-1

The product category Trabant 1.1 > Spare parts > Body is spread over 10 sites:
12345678910
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Spielfiguren von Bullyland | Spielfiguren