This site in german: Trabant 1.1 > Ersatzteile > Karosserie 
You are here: > Trabant 1.1> Spare parts> Body
Navigation

Body

Category Body has the following subcategorys:

The complete offer in Body

Front rim, prime coated

Headlamp rim for Trabant 500,600, 601 und 1,1.
Mountable for R2 (Bilux) and H4 headlights.
  • Front rim fit to the left and to the right side
  • material: metal shrink boot
  • original spare part
  • two pieces will be needed
44,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 53

Center part of grille assembly

Grille assembly center part. This part is an repair-profile for weling in to the car body between the two haed lamp holders front right and left hand.
  • matreial: profiled sheet steel
  • new produciton
  • fit to all Trabant 601 and Trabant 1,1
  • one piece will be needed
29,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 439

Grille assembly, complete

nach Verfügbarkeit lieferbar !
180,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 440

Front transverse member

Front transverse member is welded across in front of the car. It is the girder for the engine-gearbox underfarme. At the side wall it is the connection to the side member left or right hand. The six holes for the underframe are not drilled.
Scope of delivery complete with two car-jack points (pipe D= 30mm, d= 25mm, L= 76mm)
fit to all Trabant 601.
  • coated with transport sealing varnish
  • made in Germany
  • one piece will be needed
365,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 441

Alu Spray 400ml

Spray on the basis of special mixture of resins and aluminium pigments.
Aluminium-zinc doubleprotection.
Best resistance to high temperatures.
Excellent for use at exhaust systems and for car body works.
  • contens: 400ml
  • product is free of FCKW
  • heat resistance up to approx 800 °C
price: 46,05 Euro / liter
18,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7493

Under-frame

Underframe for Trabant 1,1
The part is complete checked, sandblasted, undercoated (primed), and varnished (black).
295,00 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 446

Mounting screw under frame

Mounting bolt for the connection between underframe and front transverse member.
Scope of delivery inclusive external teeth lock washer and nut.
  • grade: 10.9
  • surface: galvaniced
  • for the Trabant 500,600,601 will be 6 pieces needed
  • for the Trabant 1,1 will be four pieces needed
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6746

Twin bearing

Rubber spring front for engine Trabant 1,1. The bearing is screwed direct at the under frame.

  • one piece will be needed
42,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 447

Side member, left side

Side member left hand. This part is an repair-profile for weling in to the car body between the left outer half of rear wheel house and the Front transverse member.
  • matreial: profiled sheet steel
  • original IFA-spare part
  • fit to all Trabant 601 and Trabant 1,1
  • one piece will be needed
38,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 450

Side member, right side

Side member right hand. This part is an repair-profile for weling in to the car body between the right outer half of rear wheel house and the Front transverse member.
  • matreial: profiled sheet steel
  • original IFA-spare part
  • fit to all Trabant 601 and Trabant 1,1
  • one piece will be needed
38,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 451

Snap-in plug for side member

Plug for round holes in car bodys with a diameter of 22 mm (0,87 inch) and with wall thickness from 0,8 mm up to 2,0 mm.

four pieces needed for each Trabant

  • Material: thermoplastic rubber
  • Colour: black
  • Permanent operation temperature: -40°C - 135°C (temporary up to +150°C)

This type of grommet is very good to mount and demount, excellent for recurrent check and working of inner side of car body. This plug has a height of 5 mm.
2,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 455

Rubber plug for side member, flat

Plug for round holes in car bodys with a diameter of 22 mm (0,87 inch) and with wall thickness up to 2,4 mm (0,095 inch).

four pieces needed for each Trabant

  • Material: PVC
  • Colour: black

This type of plug is a little bit more difficile to mount and demount than the snap-in plug. This plug has a height of about 3 mm in the centre and leveling off to the border. So it has a very smooth lookout.
2,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6929

Rubber membrane plug for holes with diameter of 15mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 15 mm
inner diameter of membrane (max. usable diameter): 9 mm
outer diameter (total): 20 mm
0,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6796

Rubber membrane plug for holes with diameter of 18,5mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 18,5 mm (0,728")
inner diameter of membrane (max. usable diameter): 11 mm (0,433")
outer diameter (total): 23 mm (0,906")
0,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6895

Rubber membrane plug for holes with diameter of 20,5mm

Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 20,5 mm
inner diameter of membrane (max. usable diameter): 13,5 mm
outer diameter (total): 25 mm
thickness: 7 mm
1,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6797

Rubber membrane plug for holes with diameter of 28mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 28 mm
inner diameter of membrane (max. usable diameter): 21 mm
outer diameter (total): 35 mm
1,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6798

Rubber membrane plug for holes with diameter of 47mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
  • fit to hole diameter of 47 mm
  • inner diameter of membrane (max. usable diameter): 36 mm
  • outer diameter (total): 54 mm
  • thicknes of the menbrane: 1mm
  • total thickness: 10mm
2,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6800

Rubber membrane plug for holes with diameter of 37mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 37 mm
inner diameter of membrane (max. usable diameter): 29 mm
outer diameter (total): 44 mm
1,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6799

Rubber membrane plug for holes with diameter of 32mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
  • fit to hole diameter of 32 mm
  • inner diameter of membrane (max. usable diameter): 25 mm
  • outer diameter (total): 39 mm
  • thicknes of the menbrane: 1mm
  • total thickness: 9mm
2,23 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7613
1+1

Cover plate, front

This cover plate is mouned under the Trabant 601 front bumber. It save the dynamo and a part of the pree silencer.
  • material: formed metal plate
  • delivery: basic varnished black
  • made in EU
  • one piece will be needed
please note: we charge additional fees for bulky goods !!
44,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 459

Lower side part left side

Lower side part from the doorway left hand. This part is an repair-profile for weling in to the car body on top of the side member.
  • matreial: profiled sheet steel
  • fit to all Trabant 601 and Trabant 1,1
  • one piece will be needed
25,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 460

Lower side part right side

Lower side part from the doorway right hand. This part is an repair-profile for weling in to the car body on top of the side member.
  • matreial: profiled sheet steel
  • fit to all Trabant 601 and Trabant 1,1
  • one piece will be needed
25,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 461

Lower side part protector

Lower side part protector is fitted under the doors.
Fit to all Trabantz 601 from year: November 1984 (limousine), and from year January 1985 (station wagon)
  • material: plastic
  • colour: black
  • original made in Germany
  • 2 pieces will be needed
Price: 25,90 Euro / Meter
25,90 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 462

Outer lower part of luggage boot ( station-wagen )

Rear metal sheet of the car boot Trabant Universal (station wagon).
Fir to Trabant 1,1 and Trabant 601 types.
Original spare part.
please ask for availability!
200,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 504

Outer lower part of boot ( Limousine )

Rear metal sheet of the car boot Trabant Limousine.
Fir to Trabant 1,1 and Trabant 601 types.
Original spare part.
please ask for availability!
200,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 505

Lock unit for Rear door ( station wagen )

This lock will be mounted at the Trabant Universal inside of rear door. It is applied by the door hinge.
  • original spare part
  • one piece will be needed
15,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6136

Rear door ( station wagen )

Rear door for the Trabant Universal. Scope of delivery: single part, without additional mounting parts.
  • band new original spare part
  • surface: basic colour
115,55 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 510

Boot lid ( Limousine )

fit to car body variant limousine of Trabant 601 and Trabant 1.1
original IFA spare part
195,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 511

Hinge rear door, left side

Tailgate hinge complete component, aluminium. Made in Hungary, the qualtiy does not compare to the original ones (worse)
  • Trabant Universal driver side
  • one piece will be needed
8,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 512

Hinge rear door, right side

Tailgate hinge complete component, aluminium. Made in Hungary, the qualtiy does not compare to the original ones (worse)
  • Trabant Universal codriver side
  • one piece will be needed
8,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 513

Suspension support for rear door

Gas pressure support for the rear door Trabant from vintage april 1983
  • length unladen: 50 cm
  • diameter cylinder stick: 10 mm
  • diameter gas cylinder: 22 mm
  • up side with tap M6
  • down mounting eye D=8 mm
  • two pieces will be needed
26,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 514

Boot lid hinge, complete

Complete premounted component. Fit to all Trabant 601 and 1,1 without vintage dissociation.
  • original spare part
  • two pieces will be needed
44,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 515

Boot lid lock Limousine, original

Genuine part tailgate lock for the Limousine of the Trabant 601 and 1.1 witjout vintage limit.
  • delivery inclusive lock and two keys
  • inclusive sealing plate
  • inklusive mounting holder
  • one piece will be needed
  • NOS, original spare part
94,20 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7396

Rubber section for boot lid

Profile rubber for sealing the car boot of the Trabant Limousine. D
Brillant rubber sealing, perfect fit, in best quality. Made in Germany.
  • length: 2,92 meter
  • material: rubber, black
  • fit for all Trabant 601 and 1.1 Limousine
  • one piece will be needed
Price: 11,61 Euro / Meter
34,84 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 516

Rubber section for rear door

black cellular rubber (sponge rubber) section for tailgate of Trabant (601 and 1.1)
  • length: 3,50 Meter
  • German product
price per piece
33,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 517

Clamping piece for rubber section

9,20 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 518

Flexible edge protector, white-grey

universal to use

price for one meter
Price: 3,60 Euro / Meter
3,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6073

Screw 2,9mm for cover moulding mudguards and doors

Stainless steel screw slotted like the original type and size to fix the aluminium stips. Can be used for all alu strips at the mudguards front and rear and at the doors as well.
Fit to all Trabant and Trabant 1.1 models and types.
  • material: A2
  • head design: round-head tapping screw
0,35 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6816

Screw 3,5mm for cover moulding mudguards and doors

Stainless steel screw slotted like the original type. The length is the same like original but the diameter is thicker (3,5mm).
Best use to fix the aluminium stips with worn out holes at the mudguards.
Can be used for all alu strips at the mudguards front and rear and at the doors as well.
Fit to all Trabant and Trabant 1.1 models and types.
  • material: A2
  • head design: round-head tapping screw
0,36 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8145

Screw-Set 2,9mm for cover moulding mudguards and doors

Stainless steel screw slotted -kit like the original type and size to fix the aluminium stips. Can be used for all alu strips at the mudguards front and rear and at the doors as well.
Fit to all Trabant and Trabant 1.1 models and types.
  • contens: 50 pieces
  • material: A2
  • head design: round-head tapping screw
7,44 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8082

Mudgard screw, 3,9mm diameter

Stainless steel screw slotted for mounting the plasic wings at the car body.
Best peplacement for the original one without corrosion.
Fit to all Trabant 601 and 1,1 all models also Kübel and Tramp.
  • material: A2
  • type: tapping screw diameter: 3,9mm
  • price per piece
0,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8168

Mudgard screw, original diameter

Stainless steel screw slotted for mounting the plasic wings at the car body.
Best peplacement for the original one without corrosion.
Fit to all Trabant 601 and 1,1 all models also Kübel and Tramp.
  • material: A2
  • type: tapping screw, original diameter
  • price per piece
0,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7720

Plug for body

Small plug for holes diameter 5mm.
Can be used for the car body.
  • material: rubber, black
  • total length: 27mm
  • made in Germany
2,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7705

Screw 2,9mm for cover moulding roof

Stainless steel screw slotted for the aluminium stips.
  • material: A2
  • head design: round-head tapping screw
  • sation wagon will be 17 pieces needed
  • Limousine will be 15 pieces needed
  • price per piece
0,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6817

Screw 3,5mm for cover moulding roof

Stainless steel screw slotted like the original type. The length is the same like original but the diameter is thicker (3,5mm).
Best use to fix the aluminium stips with worn out holes at the roof.
Can be used for all alu strips at the roof.
Fit to all Trabant and Trabant 1.1 models and types.
  • material: A2
  • head design: round-head tapping screw
  • sation wagon will be 17 pieces needed
  • Limousine will be 15 pieces needed
0,36 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8146

Screw for radiator cover

Stainless steel screw slotted for the aluminium cover front (radiator grill).
Best peplacement for the original one without corrosion.
Fit to all Trabant 601 and 1,1 all models also Kübel and Tramp.
Please note for the Trabant 601 Standard up to vintage 1970.
  • material: A2
  • head design: round-head tapping screw
  • six pieces will be needed
  • delivery inclusive washer ans nut
0,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7717

PVC-section for cover moulding, complete for one car, 7 meter, BLACK

One komplett set of black plastic profile for mounting inside the aluminum stripes along the front / rear fenders and doors.
Good quality reproduction, made in Germany
  • colour: black
  • fit for all Trabant 601 and 1,1
  • Limousine and station wagon
  • delivery as one piece (7m)
  • one set will be needed
Price: 4,29 Euro / Meter
30,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 541

Spring clamp for cover plate, rear door station wagon

Spring for coverplate air cooling housing Trabant two stroke motor and cover felt rear door station wagon.
  • material: matal, galvanized
  • made in EU
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1161

Inner rear view mirror

Panorama mirror for the Tranant indoor in best quality.
The spare part is original made in Germany (NOS).
  • lenght: 24,5 cm
  • wide: 7 cm
  • delivery inclusive plastic feet for mounting at the roof frame
55,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1171

Rear rubber lining for boot lid look

Sealing for the boot look of the Trabant type Limousine.
The rubber will be mounted behind the aluminium look.
Fit ot all tailgates of the T601 and T1,1.
  • material: Gummi, black
  • original spare part
  • one piece will be needed
2,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1180

Boot lid look catch, Limousine

The plasitc look catch will be mounted at the outer lower part of boot of the Trabant type Limousine.
The plastic part will hold the arrester hook and secure if the tailgate is cloused.
Fit ot all tailgates of the Trabi 601 and T1,1.
  • material: PVC
  • original spare part
  • one piece will be needed
6,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1181

Mudflaps set rear

Rubber dirttraps four monting at the back side of the Trabant wheel case. Type with stamped S-trademark.
  • delivery inclusive 2x mounting metal strips
  • set consist of two pieces
  • dimension: 20 x 20 cm, thickness: 5 mm
  • material: rubber, black
  • one set will be needed
14,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1230

Instrument panel

85,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1052

Instrument panel

used part
demounted from Trabant 1.1
with components (tachometer, switches)
188,54 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6107

Cover for instrument panel

15,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1053

Intake line for windscreen washer (ID=5mm)

Plastic hose for windscreen cleaning system with the inside diameter of 5 mm.
  • Price for each meter
  • If you want more as one meter please just order more pieces
  • made in Germany
Price: 1,93 Euro / Meter
1,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6883

Intake line for windscreen washer (ID=4mm)

Plastic hose for windscreen cleaning system with the inside diameter of 4 mm.
  • Price for each meter
  • If you want more as one meter please just order more pieces
  • made in Germany
Price: 1,93 Euro / Meter
1,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1127

Sealing for pump windscreen washer - bottle

Rubber sealing for the pump for windshield washer at the fresh water bottle. Mounted at all Wartbrug 1,3 with tank for fresh water and Wartburg 353 from vintage march 1985.
  • material: rubber, black
  • one piece will be needed
3,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7579

Yoke for electrical pump

Retainer for the pump for windshield washer.
Fit to all Wartbrug with tank for fresh waterfrom vintage march 1985.
  • original spare part
  • one piece will be needed
Original spare part number: 1366573005031127
12,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7454

Electrical pump for windscreen washer

The pump for windshield washer is a complete component. Mounted at all Wartbrug with tank for fresh waterfrom vintage march 1985.
  • Reproduction
  • delivery without sealing LDM-part-no.: 7579
  • supply voltage 12V
  • electrical connection over two flat plugs: 6,3 x 0,8
  • one piece will be needed
16,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1128

Rubber grommet for tachometer shaft

rubber grommet for flexible speedometer shaft
fit to all variants of Trabant 601 and 1.1
  • inner diameter: 7,5 mm
  • for hole diameter of: 25 mm
  • thickness: 7,5 mm
  • one piece will be needed
4,85 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6734

eyebolt for for grille assembly

Wing screw for mounting the grille assembly, fit to Trabant 601 and 1,1.
  • delivery without rubber ring
  • original spare part
  • two pieces will be needed
14,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 81

Rubber for eyebolt for for grille assembly

Rubber washer for the wing screw for mounting the grille assembly, fit to Trabant 601 and 1,1.
  • two pieces will be needed
0,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7279

Rubber lining EU for brake and clutch pedal-shaft

Rubber pad for the clutch and brake pedal.
  • material: rubber, black
  • made in EU
  • worse qulity
  • two pieces will be needed
8,55 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8013

Rubber lining made in Germany for brake and clutch pedal-shaft

Rubber pad for the clutch and brake pedal.
New reproduction made in Germany in brilliant quality.
Fit to many IFA cars like Trabant, P70/F8, Wartburg 311, Multicar...
  • material: rubber, black
  • made in Germany
  • best quality
  • two pieces will be needed
12,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 184

Foot lever clutch

Foot lever for the mecanical actuated cluch system of the Trabant 601 and 1,1.
24,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7127

Foot lever unit ( overhauled )

Foot lever unit constist of one lever for the hydraulic actuated brake system and one lever for the mechanical actuated cluch system. The set is complete in Germany refreshed and pre-installed.
110,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 185

release spring for pedal, late model

release spring fit to brake pedal and clutch pedal of pedal unit
length of the spring coil: 53mm
diameter of the spring coil: 10mm
total length of the spring: ca.122mm
  • fit to Trabant 601 and Trabant 1.1
  • two pieces will be needed
7,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6643

Rubber membrane plug for holes with diameter of 25mm

Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 25 mm
inner diameter of membrane (max. usable diameter): 18,5 mm
outer diameter (total): 30,5 mm
thickness: 7 mm
1,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7625

Bitumen/plastic plates, foil-laminated

Self-adhesive absorbing plates for sheet metal parts (car doors, computer cases or something else).
  • with aluminium foil-laminated
  • colour: silver
  • content: 6x pltes with 500 x 250mm
  • thickness: about 2mm
  • weight per unit of area: 3,7 kg/m²
Price: 87,55 Euro / m²
72,23 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6891

Mounting bolt for interior lining

Special srew made of stainless steel.
0,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7745

Grinding fleece - pad, rot

Fleece to buff surfaces form coatings and cleaning of aluminium, brass ec.
Can be used for working by hand.
  • Price per pice
  • Pice size: 100x10mm and 20cm long
  • Rauheit: very fine: 320
Price: 5,35 Euro / Meter
1,07 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7889

Interior lamp

Lamp for the Trabant 601 and 1,1 interior.
For the insert will be nedded:
1x tubular bulb 6V: LDM-no.: 121
1x tubular bulb 12V: LDM-no.: 135
  • original spare part
  • delivery without bulb
original spare part no. 8838-173
12,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 98

Underbody protection wax 1000ml

Protecton wax for the underside and wheel cases for many vehicles.
To spray the wax an special atomizer pistol lance will be needed.
Recommended amount 300g/qm, source function 3-4qm.
Best use for body work, vehicle manufacturing and road maintenance.
The wax protect the cars against mechanical and chemical stress like rock chips, gritting salt, water and so on. And corrosion will be bewared.
  • contens: 1000ml
  • corrosion protection at salt dust like DIN 50021: 500 hours without rost
  • Dust dry after 2 hours, dry after 4-5 hours
  • temperature from -25° C bis 80° C
  • wax based product
Price: 10,67 Euro / Liter
10,67 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8087

Underbody protection wax 500ml, Spray

Protecton wax for the underside and wheel cases for many vehicles.
To spray the wax no special tools will be needed.
Recommended amount 300g/qm, source function 1,5qm.
Best use for body work, vehicle manufacturing and road maintenance.
The wax protect the cars against mechanical and chemical stress like rock chips, gritting salt, water and so on. And corrosion will be bewared.
  • contens: 500ml
  • corrosion protection at salt dust like DIN 50021: 500 hours without rost
  • Dust dry after 2 hours, dry after 4-5 hours
  • temperature from -25° C bis 80° C
  • wax based product
  • colour: brown
Price: 18,76 Euro / Liter
9,38 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8088

Underbody protection 1000ml

Protecton wax for the underside and wheel cases for many vehicles.
To spray the underbody an special atomizer pistol lance will be needed.
Best use for body work, vehicle manufacturing and road maintenance.
The bitumen protect the cars against mechanical and chemical stress like rock chips, gritting salt, water and so on. And corrosion will be bewared.
  • contens: 1000ml
  • corrosion protection at salt dust like DIN 50021: 500 hours without rost
  • Dust dry after 4-5 hours
  • dry afer 24 houers
  • temperature from -25° C bis 80° C
  • bitumen based product
Price: 21,10 Euro / Liter
21,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8293

Body-cavity sealing, Elaskon 1000ml

Protecton wax for the body cavity and frames for many vehicles.
To spray the wax will be an special atomizer pistol lance will be needed.
Recommended amount 250g/qm.
Best use for body work, vehicle manufacturing and road maintenance.
The wax protect the cars against mechanical and chemical stress like rock chips, gritting salt, water and so on. And corrosion will be bewared.
  • contens: 1000ml
  • Dry after 4-8 hours
  • temperature from -25° C bis 80° C
  • wax based product
Price: 14,70 Euro / Liter
14,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8404

Compressed air underbody protection gun

simple air gun for spray off protecton wax at the body and frames for many vehicles.
Best use for body work, vehicle manufacturing and road maintenance.
  • delivery inclusive additional cavity tube
46,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8421

Compressed air underbody protection gun

Simple air gun for spray off protecton wax at the body and frames for many vehicles.
Best use for body work, vehicle manufacturing and road maintenance.
  • only use for underbody protection
30,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8422

Zinc-alu Spray 400ml

Spray on the basis of special mixture of resins and aluminium pigments.
Aluminium-zinc doubleprotection.
Best resistance to high temperatures.
Excellent for use at exhaust systems and for car body works.
  • contens: 400ml
  • product is free of FCKW
  • heat resistance up to approx 300 °C
price: 22,25 Euro / liter
8,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8428

Conical seat for suspension support for rear door

Massive made of metal produced conical seat for mounting at the rear door suspensions.
Fit to the gas pressure support for the rear door Trabant from vintage april 1983
  • part is galvaniced and pree greased
  • fit for suspensions threat: M6
  • diameter of the ball head: 10mm
  • made in Germany
  • two pieces will be needed
2,66 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8473

PVC-section for cover moulding, complete for one car, 7 meter, GREY

One komplett set of grey plastic profile for mounting inside the aluminum stripes along the front / rear fenders and doors.
Good quality reproduction, made in Germany
  • colour: grey
  • fit for all Trabant 601 and 1,1
  • Limousine and station wagon
  • delivery as one piece (7m)
  • one set will be needed
Price: 4,29 Euro / Meter
30,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 542

PVC-section for cover moulding, complete for one car, 7 meter, BLUE

One komplett set of lue plastic profile for mounting inside the aluminum stripes along the front / rear fenders and doors.
Good quality reproduction, made in Germany
  • colour: blue
  • fit for all Trabant 601 and 1,1
  • Limousine and station wagon
  • delivery as one piece (7m)
  • one set will be needed
Price: 4,29 Euro / Meter
30,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 543

PVC-section for cover moulding, complete for one car, 7 meter, RED

One komplett set of red plastic profile for mounting inside the aluminum stripes along the front / rear fenders and doors.
Good quality reproduction, made in Germany
  • colour: red
  • fit for all Trabant 601 and 1,1
  • Limousine and station wagon
  • delivery as one piece (7m)
  • one set will be needed
Price: 4,29 Euro / Meter
30,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 544

PVC-section for cover moulding, complete for one car, 7 meter, GREEN

One komplett set of green plastic profile for mounting inside the aluminum stripes along the front / rear fenders and doors.
Good quality reproduction, made in Germany
  • colour: green
  • fit for all Trabant 601 and 1,1
  • Limousine and station wagon
  • delivery as one piece (7m)
  • one set will be needed
Price: 4,29 Euro / Meter
30,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 545

Mounting bolt for foot lever unit

Mounting screw for foot lever unit.
  • fit to Trabant 601 and Trabant 1,1
  • scope of delivery inclusive 1x bolt, 1x Washer, 1x spring washer
  • 4 pieces will be needed
1,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8522

Plastic protection, wire tap

Plastic hose to protect the electrical wires at the mounted metal taps at the car body. Trabant engine compartment, car boot, passenger room.
  • PVC, lack
  • price per meter
6,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7675

Set of cable grommet seal

One set of cable grommet seals with different sizes.
Contens:
  • 40 pieces body hole: 6mm / wire bore: 2mm
  • 40 pieces body hole: 7,5mm / wire bore: 5mm
  • 40 pieces body hole: 9mm / wire bore: 6mm
  • 25 pieces body hole: 11mm / wire bore: 8,5mm
  • 20 pieces body hole: 12mm / wire bore: 10mm
  • 5 pieces body hole: 15mm / wire bore: 12mm
  • 5 pieces body hole : 20,5mm / wire bore: 14,5mm
  • 5 pieces body hole: 23,5mm / wire bore: 17,5mm
15,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8608

Screw-Set 2,9mm for cover moulding roof

One Set of Stainless steel screw slotted for the aluminium stips.
  • material: A2
  • head design: round-head tapping screw
  • sation wagon will be 17 pieces needed
  • Limousine will be 15 pieces needed
  • Set constist of 20 pieces
piece: 0,35 Euro / piece
6,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8637

Screw 3,5mm for cover moulding roof

Stainless steel screw slotted like the original type. The length is the same like original but the diameter is thicker (3,5mm).
Best use to fix the aluminium stips with worn out holes at the roof.
Can be used for all alu strips at the roof.
Fit to all Trabant and Trabant 1.1 models and types.
  • material: A2
  • head design: round-head tapping screw
  • sation wagon will be 17 pieces needed
  • Limousine will be 15 pieces needed
  • Set consist of 20 pieces
Price: 0,38 Euro / piece
7,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8638

Mudgard screw-set, original diameter

One set of stainless steel screw slotted for mounting the plasic wings at the car body.
Best peplacement for the original one without corrosion.
Fit to all Trabant 601 and 1,1 all models also Kübel and Tramp.
  • material: A2
  • type: tapping screw, original diameter
  • set constist of 100 pieces
price: 0,10 Euro / piece
9,52 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8639

Mudgard screw-set, 3,9mm diameter

Stainless steel screw slotted for mounting the plasic wings at the car body.
Best peplacement for the original one without corrosion.
Fit to all Trabant 601 and 1,1 all models also Kübel and Tramp.
  • material: A2
  • type: tapping screw diameter: 3,9mm
  • set consist of 100 pieces
Price: 0,11 Euro / piece
10,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8640
The complete offer in Body

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas