master brake cylinder

Brake master cylinder, 2 circle for Barkas B1000, B1000-1
complete.
Made in EU

banjo screw for mounting the aluminium terminal at the tandem brake master cylinder, clutch master cylinder or cluch slave cylinder Barkas B1000.

technical specifications:

• thread: M12x1
• spanner gap: SW17
• total length: 24 mm
• thread length: 11,5 mm
• inner diameter: 3,5 mm

Ring terminal, mounting one hand with banjo screw M12 and on the other end by brake pipe or brake hose (M12x1)

technical specifications:

• material: Aluminium
• bore size for banjo screw: 12,1mm, thickness: 11,2mm
• thread: M12x1 Type E
• delivery without mounting bits

In Germany overhauled main brake clinder fit to Barkas B1000 and Barkas B1000-1.
Please note: Delivery only in exchange!
You have to ship 1x Brake master cylinder, 2 circle original IFA to our company in advance!

• refreshed original spare part in exchange
• delivery without mounting parts
• one piece will be needed

Brake master cylinder, 1 circle for Barkas B1000, Framo and Wartburg 311,312 and 313.
piston diameter: 22,2mm
Case mark: Renak CH 107
Details about the exchange parts:
This spare part we can only deliver in direct exchange.
Please send one overhaulable Brake master cylinder two-circle (original IFA production), case type: Renak to our company in advance. After checking the delivered parts for the possibility of overhauling we will send you the prepaid invoice.

Sleeve set for brake master cylinder of one-circuit brake system
piston diamater: 22,2mm
Case mark: Renak CH 107
consist of:

• 1x annular boot for piston
• 1x rubber cup sleeve
• 1x rubber valve sleeve

fit to Wartburg 353 and Barkas B1000 (2-stroke)

Complete in Germany overhauled brake master cylinder.
Type: Renak CH 7

• Brake master cylinder, 1 circle for Barkas B1000, Mulicar M22, Mulicar M24, ZT, 3to-Stapler, Warburg 311,312,313, Framo
• piston diameter: 25,4mm

Details about the exchange parts:
This spare part we can only deliver in direct exchange.
Please send one overhaulable Brake master cylinder two-circle (original IFA production), case type: Renak to our company in advance. After checking the delivered parts for the possibility of overhauling we will send you the prepaid invoice.

Two sealing rings for the wheel brake cylinders built in front brake of Wartburg 311.
Case mark: Renak CH 7

• for diameter of piston: 25,4 mm
• scope of delivery: two piece of ring sleeve
• one piece is needed for each wheel brake cylinder
• first-class quality made in Germany

Brake master cylinder as reproduction of the Renak CH 7.
New production made in EU.
Selling without exchange part.

• Brake master cylinder, 1 circle for Barkas B1000, Mulicar M22, Mulicar M24, ZT, 3to-Stapler, Warburg 311,312,313, Framo
• piston diameter: 25,4mm
• delivery without mounting parts

Reservoir for brake fluid with two glands for Trabant 601 with 2-circle brake master cylinder, from vintage: april 1980.Fit also to Wartburg 353 and 1.3, Barkas B1000 with two circle brake master cylinder and Barkas B1000-1.

• scope of delivery: inclusive cap, but without mounting parts
• one piece will be needed

Connection hose from brake fluid reservoir to 2-circle master brake cylinder
length: 570 mm
Can be used for Barkas B1000 and B1000-1.

• material: brake fluid resisant rubber
• colour: black
• one piece needed

connection hose from brake fluid reservoir to 1-circle or 2-circle master brake cylinder
length: 670 mm
Can be used for Barkas B1000 and B1000-1.

• material: brake fluid resisant rubber
• colour: black
• one piece needed

for use in Trabant, Wartburg, B1000, trailer and camper with hydraulical brake system and a lot of other car types

• volume: 250 ml

Additional comment: Notes for used oil disposal

for use in Trabant, Wartburg, B1000, trailer and camper with hydraulical brake system and other cars

• volume: 500 ml

Additional comment: Notes for used oil disposal

for use in Trabant, Wartburg, B1000 and other cars

• volume: 1,0 l
• norms: FMVSS Nr.116 DOT4 und DOT3, SAEJ1703, DIN/ISO 4925

Additional comment: Notes for used oil disposal

Special tool for mounting or demounting of screw-cap for brakelines.
type: level angleded
Fit to brake screws SW10 and SW11.

Special tool for mounting or demounting of screw-cap for brakelines.
type: sraight
Fit to brake screws SW10 and SW11.

Special tool for mounting or demounting of screw-cap for brakelines.
type: sraight
Fit to brake screws SW12 and SW13.

quick-cleaner for brake and clutch parts

• FCKW free
• volume: 600 ml
• type: AD
• delivery as an single spray

quick-cleaner for brake and clutch parts

• FCKW, aceton free
• volume: 850 ml
• delivery as an single spray

Complete packing unit quick-cleaner for brake and clutch parts

• FCKW free
• content: 12x sprayer with volume of 600 ml