Electrical system

The complete offer in Electrical system

toggle switch with protection cap

Detail

toggle switch with mechanical unblocking (protection cap)

double-pole change over switch
max. current: 15A
red protection cap, failsafe inhibiting of switching by mistake (ideal for safety-related applications like ignition or approval, nitrous oxide injection-system or similar)
Automatical switching off by folding back the protection cap

17,95 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6001

protection cap for toggle switch, color: red

Detail

protection cap made of red plastic
black metall ground plate
fit for all toggle switches with mounting thread of 12mm and lever length of max. 17mm
ideal for safety-related applications like ignition or approval, nitrous oxide injection-system or similar
switching off and lock the toggle switch, if cap will put down
for most toggle switches

14,45 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6002

toggle switch, illuminated Detail unipolar toggle switch for using inside a car The lever was made of transparent plastic. It can be illuminated by a bulb inside the switch. The color of illumination will be changed dependig on position of lever. Separate connectors for the internal bulb so it can be switched on in tandem with the car lights.
6,50 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6003

protection cap for toggle switch, color: blue metallic

Detail

protection cap made of (metallic glaze) blue plastic
black metall ground plate
fit for all toggle switches with mounting thread of 12mm and lever length of max. 17mm
ideal for safety-related applications like ignition or approval, nitrous oxide injection-system or similar
switching off and lock the toggle switch, if cap will put down
for most toggle switches

10,92 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6004

protection cap for toggle switch, color: black with carbon-look

Detail

protection cap made of plastic with carbon-look surface
black metall ground plate
fit for all toggle switches with mounting thread of 12mm and lever length of max. 17mm
ideal for safety-related applications like ignition or approval, nitrous oxide injection-system or similar
switching off and lock the toggle switch, if cap will put down
for most toggle switches

10,92 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6005

protection cap for toggle switch, color: transparent blue

Detail

protection cap made of blue transparent plastic
black metall ground plate
fit for all toggle switches with mounting thread of 12mm and lever length of max. 17mm
ideal for safety-related applications like ignition or approval, nitrous oxide injection-system or similar
switching off and lock the toggle switch, if cap will put down
for most toggle switches

10,45 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6007

protection cap for toggle switch, color: transparent yellow

Detail

protection cap made of yellow transparent plastic
black metall ground plate
fit for all toggle switches with mounting thread of 12mm and lever length of max. 17mm
ideal for safety-related applications like ignition or approval, nitrous oxide injection-system or similar
switching off and lock the toggle switch, if cap will put down
for most toggle switches

10,45 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6009

protection cap for toggle switch, color: transparent green

Detail

protection cap made of green transparent plastic
black metall ground plate
fit for all toggle switches with mounting thread of 12mm and lever length of max. 17mm
ideal for safety-related applications like ignition or approval, nitrous oxide injection-system or similar
switching off and lock the toggle switch, if cap will put down
for most toggle switches

10,45 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6008

protection cap for toggle switch, color: transparent red

Detail

protection cap made of red transparent plastic
black metall ground plate
fit for all toggle switches with mounting thread of 12mm and lever length of max. 17mm
ideal for safety-related applications like ignition or approval, nitrous oxide injection-system or similar
switching off and lock the toggle switch, if cap will put down
for most toggle switches

10,45 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6006

Relais 12V 50A (changeover contact)

Detail

Additional relais for operating supply 12V DC with changeover contact. The maximum current 30 ampere.

5 x blade terminal connection pins (6 x 0,8mm
1x changeover contact (can be used as changeover-, make- or break contact
Max. continuous current with 12V DC: 40A (make contact no.87)/ 30A (break contact no.87a)
plastic case
dimensions: 28 x 28 x 25 mm (without mounting lug)

8,92 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6890

Ignition look (second hand) W353 Detail Complete unit with key switch for ignition and starter (with key) Fit to all Wartburg 353. Please note: secound hand spare part.
86,84 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7280

Fuse 8A Detail white fuse for current up to 8A fit to all vehicles with this type of fuse
0,25 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 1220

Fuse 16A Detail red fuse for current up to 16A fit to all vehicles with this type of fuse
0,25 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 1221

Fuse set

Detail

Torpedo-fuse kit ideal for traveles or for the daily use.
Delivery with resealable blister box.
Scope of delivery:

4x 8A (withe)
4x 16A (red)
2x 25A (blue)

2,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6437

Key switch Detail One grade switch made of Duro-plastic Can be used for 6,12 (120W) and 24V (150W) electrical systems. Best use for additional electrical units at Old- and Youngtimers.
original spare part number: 8600.21/1	1,95 €inclusive VAT, plus shipping costs temporary not available Art.No. 7590

Rocker switch rear window defroster

Detail

Angular single step switch with function light for mounting for example at the dashboards.
Colour of the switch: yellow
symbol: window defroster
Can be used for 6,12 and 24V electrical systems.
Space saving frame size, best use for additional electrical units at Old- and Youngtimers.
Delivery without bulbs, it will be for example glas base bulb 12V 1,2W one needed.

original spare part number: 8620.19/112

9,88 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7627

Single grade pull switch Detail Small pull switch for mounting for example at the dashboards. Can be used for 6,12 and 24V electrical systems. Space saving frame size, best use for additional electrical units at Old- and Youngtimers.
original spare part number: 8600.23	4,76 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7589

windscreen washer kit

Detail

Complete kit for windscreen washer system with electrical pump and water bottle
voltage: 12V
Scope of delivery:

bottle 1,5 liter
cap
metal holder
wash pump 12V
1m plastic hose (connection pump-spray jet
1 piece of two double jet washer inclusive retainer spring

fit to follow washer systems:
windscreen Trabant 601
Wartburg 353 and 1.3 Tourist rear window

56,53 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6907

electrical pump for windscreen washer Detail electrical pump to put into the water bottle of windscreen washer voltage: 12V fit to follow washer systems: windscreen Trabant 601 rear window Wartburg 353 and 1.3 TOURIST (only for estate wagon)
42,46 €inclusive VAT, plus shipping costs temporary not available Art.No. 1125

Water vessel for windscreen washer system, singel part Detail Water bottle for windscreen washer system, to use in tandem with electrical pump bottle Volume: 1,5 liter original spare part fit to follow washer systems: windscreen Trabant 601 Wartburg 353 and 1.3 TOURIST rear window single part without pump, cap and metal holder
parts-no. 136 65 730	33,80 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6908

Interior lamp Wartburg

Detail

Lamp for the passenger compartments Wartburg 353 and Wartburg 1,3.
Can be used for 6V and 12V tubular lams 5W.

Original spare part
delivery without bulbs
delivery inclusive two mounting screws

original spare part number: 8838.174

28,11 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7756

Mounting screw for interior lamp Wartburg

Detail

Truss-head screw made of stainless stell for mounting the lamp for the passenger compartments Wartburg 353 and Wartburg 1,3.

Original type of screw
material: stainless steel
delivery as an single part
two pieces will be needed

0,15 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7757

Switch and timing switch for wiper motor

Detail

Combination switch with 2 level timing,2 level of wiper speeds and button for screen water.
Switch for wiper motor 12V.
Delivery inklusive knob for Trabant-Types. The switch can be modificatet with the knob for Wartburg, Barkas, Multicar ec.

New produced spare part
one piece will be needed

53,63 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1117

The complete offer in Electrical system

* All prices inclusive VAT and plus shipping costs.