This site in german: Wartburg 353 > Ersatzteile > Motor > Zündung 
You are here: > Wartburg 353> Spare parts> Engine> Ignition system
Navigation

Spare parts and accessories for the Wartburg 353 ignition

The complete offer in Spare parts and accessories for the Wartburg 353 ignition

Contact breaker, EU

Inexpensively breaker for the ignition controling.
Used for 2 stroke engiene Trabant, Wartburg and Barkas
for Trabant you will need two pices Wartburg and Barkas got three of them.
  • inclusive lube felt
  • material: plastic
  • original spare part
  • made in EU
4,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7299

Contact breaker, original

Breaker for the ignition controling. Best quality.
used for 2 stroke engiene Trabant, Wartburg and Barkas
for Trabant you will need two pices
Wartburg and Barkas got three of them
  • without lube felt
  • material: plastic
  • original spare part
  • made in Germany
15,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 805

Contact breaker Pertinax

used for 2 stroke engiene Trabant, Wartburg and Barkas
for Trabant you will need two pices
Wartburg and Barkas got three of them
  • old type of contact braker
  • made of fabric reinforced plastic
  • made in Germany
25,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6715

Ignition capacitor

Spark capacitor fit to all Trabant, Wartburg and Barkas with tow stroke engine.
  • Trabant: 2 pieces will be needed
  • Wartburg: 3 pieces will be needed
  • B1000: 3 pieces will be needed
2,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 806

Ignition coil 12V, 40mm made in Germany

Wartburg and Barkas ignition coil made by German producer.
The ignition coil fit to all Wartburg 353, Wartburg 312 and Barkas 2-stroke.
  • diameter: 40mm
  • length of the case: 90mm
  • made in Germany
99,07 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8199

Ignition cable set, M14 high quality, W353

Pre-finished ignition cable set for Wartburg 353 only use for the ignition coil 12 V 40mm, made in Germany (part no.:8199)
consist of:
only for LDM-part.no.: 8199
26,72 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8228

ignition cable set, M18 high quality W353

pre-finished ignition cable set for Wartburg 353 with spark plugs type M18.
Set consist of:
  • three ignition cables with right length (high quality, made in Germany, very flexible with silicon-isolation)
  • three spark plugs without metal coat
  • one rubber ring to protect the ignition cables
22,12 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7783

ignition cable set, M14 high quality W353

pre-finished ignition cable set for Wartburg 353

consist of:
  • three ignition cables with right length (high quality, made in Germany, very flexible with silicon-isolation)
  • three spark plugs, made in Germany (water proof)
  • one rubber ring to protect the ignition cables
23,12 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6446

Ignition cable set, M14 / M18 W353

Ready made ignition cable set for Wartburg 353 all types.
Fit to spark plugs M14 and M18.
Made of very flexible with silicon-isolation and carbon wire in place of copper.
electrival resistant: 8 Ohm
  • made by NGK
  • one set will be needed
27,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7888

Ignition coil 12V, genuine part 40mm

Wartburg and Barkas ignition coil for the German genuine producer.
The ignition coil fit to all Wartburg 353, Wartburg 312 and Barkas 2-stroke.
  • diameter: 40mm
  • length of the case: 90mm
  • made in Germany
34,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7053

Ignition coil 12V, 40mm

Cheap repuduction.
Ignition coil fit to all Wartburg 353 and Barkas 2-stroke
Coil diamter: 40mm
23,61 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 3161

Seal for spark plug terminal M14

Rubber protection cap for spark plug and ingniton wire. Protection against dust and spash water.
1,93 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 817

Seal for spark plug terminal

Best quality protection cap.
Rubber protection cap for spark plug and ingniton wire. Protection against dust and spash water.
Fit to spark plug terminals M14 and M18.
  • lenght total: 36,5 mm
  • diameter (big opening)): 13 mm
  • diameter (small opening): 5 mm
  • Fit to ignition cable with outer diameter of 7 mm.
Made in Germany
2,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6893

Spark plug terminal original M14, 5 kOhm

Original terminal without spray water proof.
Fit to all spark plugs M14 with connector thread M4
With a five kohm resistor for suppression of interference it is a ideal part for most (2-stroke) vehicles, which were bulit in G.D.R.
For some ignitions systems (for example the Electronic ignition base plate have only to use in tandem with such spark plug terminals (minimum resistor of 5 kohm)
  • suppression of interference (5 kOhm)
  • with additional splash water protection for the ignition cable
original spare part
15,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6894

Spark plug terminal original M14, 5 kOhm, sealed

Original terminal inclusive spray water proof.
Fit to all spark plugs M14 with connector thread M4
With a five kohm resistor for suppression of interference it is a ideal part for most (2-stroke) vehicles, which were bulit in G.D.R.
For some ignitions systems (for example the Electronic ignition base plate have only to use in tandem with such spark plug terminals (minimum resistor of 5 kohm)
  • inkusive rubber seal
  • suppression of interference (5 kOhm)
  • with additional splash water protection for the ignition cable
original spare part
5,97 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7952

Spark plug terminal, straigth original M14, 5 kOhm

Original terminal as straight version.
Fit to all spark plugs M14 with connector thread M4
With a five kohm resistor for suppression of interference it is a ideal part for most (2-stroke) vehicles, which were bulit in G.D.R.
For some ignitions systems (for example the Electronic ignition base plate) have only to use in tandem with such spark plug terminals (minimum resistor of 5 kohm)
  • suppression of interference (5 kOhm)
  • with no additional splash water protection for the ignition cable
Made in Germanyoriginal spare part number: 8825. 1/2
16,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7477

Spark plug terminal M14, 5 kOhm

Fit to all spark plugs M14 with connector thread M4
With a five kohm resistor for suppression of interference it is a ideal replacement part for most (2-stroke) vehicles, which were bulit in G.D.R.
For some ignitions systems (for example the Electronic ignition base plate have only to use in tandem with such spark plug terminals (minimum resistor of 5 kohm)
  • suppression of interference (5 kOhm)
  • with no additional splash water protection
7,35 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6826

Spark plug terminal M14 for electromagnetic shielding

Original spark plug M14 with connection tap for electromagnetic shielding set.
fit to all spark plags M14
  • genuine spare part
  • 5KOhm
  • zack-no: HSL78830000
  • inclusive additional splash water protection
  • made in Germany
  • two pieces will be needed
9,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7147

Spark plug terminal M14

fit to all spark plags M14
  • without additional splash water protection
  • made in Europe
3,91 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 815

sensor for elektronic ignition box ( EBZA2f) -repair service-

to use with original Elektronic ignition box for EBZA2f for Wartburg 353 and Barkas (B1000) – Two stroke
also with Art.No. 6046)

original sensors with new electronic
only possible per exchange and first send in the defect sensor
35,70 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6174

Elektronic ignition adapter kit

Elektronic ignition adapter kit for Wartburg 353 and Barkas – Two stroke engine.
Repacement part for the original contact braker ignition system.
155,29 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 7-24 Werktagen.

Art.No. 3162
Delivery only at advance payment.

Wire harness for ignition

Complete pree mounted wire set for the three-lever contact breaker ignition system of the Wartburg 353.
Wire colour: 1x green, 1x green-black, 1x green-red.
Inclusive protection hose, black.
One side will be mounted at the ingition interrupters and the other side at the ignition coils.
  • original spare partl
  • scope of delivery inclusive sealing for base plate case
  • one set will be needed

only use for contact braker ignition systems.
original spare part number: B 3X0.75/B18
14,59 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7436

Three-lever contact breaker base plate, complete

Ignition base plate complete with 3x contact breaker and 3x ignition capacitor
Fit to:
  • Wartburg 311
  • Wartburg 312
  • Wartburg 313
  • Wartburg 353
  • Barkas B1000 with 3 cylinder 2-stroke engine
Original spare part number: 8321.4-100/2
110,14 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 3160

Contact rail for contact breaker base plate

Metal stripe to connect the contact breaker and the ignition capacitor.
Original spare part, surface: galvaniced.
Fit to:
  • Wartburg 311
  • Wartburg 312
  • Wartburg 313
  • Wartburg 353
  • Barkas B1000 with 3 cylinder 2-stroke engine
  • with mechanical contact breaker ignition system
  • three piece will be needed
original spare part number: 8321.4-100:2
1,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7810

Mounting screw for ignition base plate

Screw made of stainless steel slotted for mounting and adjusting of the ignition base plate for Wartburg 312, 353, B1000 und boat engines.
Fit to contact braker or electronic ignition systems.
  • two pieces will be needed
  • delivery inclusive washer
  • material: stainless steel
1,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7718

Woodruff key for ignition case - timing shaft

Fitted key fit to all Wartburg 353 and Barkas B1000 2-stroke engines with contact breaker ignition or electronic ignition EBZA.
  • one piece will be needed
0,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7486

Connection clutch for ignition case - timing shaft

Clutch between V-pully and igniton shaft (ignition case)
Fit to all Wartburg 353 and Barkas B1000 2-stroke engines with contact breaker ignition or electronic ignition EBZA.
  • delivery as an single part
  • original spare part
  • one piece will be needed
original spare part number: 8321.4-003/1
19,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7951

Bearing for ignition case - timing shaft

Deep groove ball bearing fit to all Wartburg 353 and Barkas B1000 2-stroke engines with
contact breaker ignition or electronic ignition EBZA.
  • ball bearing coverd on both sides
  • producer: FAG
  • two pieces will be needed
8,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6834

Rubber seal for cable glant of ignition case

Rubber for sealing the ignition contorl cable into the ignition case.
  • Material: rubber, black
  • made in Deutschland
  • one piece will be needed
1,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6208

Ignition case W353/B1000, overhauled

Aluminium Ignition case as single part inkusive shaft (ignition cam) and bearings for the Wartburg 353 and Barkas B1000 2-stroke engines.
  • refreshed exchange part
  • all parts are manufactured and overhauled in Germany
  • one piece will be needed

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
156,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8149

Ignition case W353/B1000

Complete aluminium Ignition case inkusive three lever contact breaker bas plate, ignition cam, mounting cable and plastic cover for the Wartburg 353 and Barkas B1000 2-stroke engine.
  • original spare part
  • contact breaker: material plastic
  • one piece will be needed
248,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6878

Cover for ignition case W353/B1000

Plastic cover for the ignition case of the Wartburg 353 and Barkas B1000 2-stroke engine.
Fit for contact breaker ignition system and electronic ignition system (EBZA)
  • new production made in EU
  • material: plastic
  • colour black, withe or red
  • one piece will be needed
22,43 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6449

Spark plug M14 - 175, *ISOLATOR*

This spark plug is the basic type for Wartburg 353 and Barkas B1000 (2-stroke).
High quality product.
Plaese note: The electrode gap has to be adjusted compere to the ordes of the engine producer.
  • producer: BeruAG Isolator, Germany
  • spark plug tap: M14 x 1,25
  • wrench opening: SW21
  • rating: 175
3,50 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 1189

Spark plug set M14 - 175, *ISOLATOR*

One set of sparkplugs, 10 pieces inclusive.
This spark plug is the basic type for Wartburg 353 and Barkas B1000 (2-stroke).
High quality product.
Plaese note: The electrode gap has to be adjusted compere to the ordes of the engine producer.
  • inclusive 10 pieces of spark plugs M14, 175
  • producer: BeruAG Isolator, Germany
  • spark plug tap: M14 x 1,25
  • wrench opening: SW21
  • rating: 175
price for each one: 2,90 Euro
29,90 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 7387

Spark plug set M14 - 225, *ISOLATOR*

One set of sparkplugs, 10 pieces inclusive.
Standard spark plug for engine of Trabant 601
High quality product.
Plaese note: The electrode gap has to be adjusted compere to the ordes of the engine producer.
  • inclusive 10 pieces of spark plugs M14, 225
  • producer: BeruAG Isolator, Germany
  • spark plug tap: M14 x 1,25
  • wrench opening: SW21
  • rating: 225
price for each one: 2,90 Euro
29,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7388

Spark plug M14 - 225, *ISOLATOR*

standard spark plug for engine of Trabant 601
High quality product.
Plaese note: The electrode gap has to be adjusted compere to the ordes of the engine producer.
  • producer: BeruAG Isolator, Germany
  • spark plug tap: M14 x 1,25
  • wrench opening: SW21
  • rating: 225
3,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1190

Spark plug set M14 - 260, *ISOLATOR*

One set of sparkplugs, 10 pieces inclusive.
High quality product.
Plaese note: The electrode gap has to be adjusted compere to the ordes of the engine producer.
  • inclusive 10 pieces of spark plugs M14, 260
  • producer: BeruAG Isolator, Germany
  • spark plug tap: M14 x 1,25
  • wrench opening: SW21
  • rating: 260
price for each one: 2,90 Euro
29,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7389

Spark plug M14 - 260, *ISOLATOR*

High quality product.
Plaese note: The electrode gap has to be adjusted compere to the ordes of the engine producer.
  • producer: BeruAG Isolator, Germany
  • spark plug tap: M14 x 1,25
  • wrench opening: SW21
  • rating: 260
3,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1191

Adapter M14 ignition ajustment

adapter for the dial gauge to adjust the ignition point.
Fit to the spark plug tap M14. Hexagon nut for mounting SW 22.
usefull for the fallowing vehicles:
  • made in Germany
  • material: brass
  • Trabant 601
  • Wartburg 353
  • Barkas B1000
28,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6818

Dial gauge shock proof

High quality dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in Germany
  • scope of delivery without seperate extension pin
  • shock proof
107,04 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6821

Dial gauge simple type

High quality dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in Germany
  • scope of delivery without seperate extension pin
  • non shock proof
69,04 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 6820
Delivery only at advance payment.

Extensions pin for Dial gauge, 60mm

Extension for dial gauge. Fit to all offered gauges
  • thread: M2,5
  • diameter: 4mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in China
  • scope of delivery without seperate extension pin
  • non shock proof
3,09 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7302

Dial gauge simple type

Cheap dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in China
  • scope of delivery without seperate extension pin
  • non shock proof
24,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7300

Dial gauge digitale type

Good quality dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in China
  • scope of delivery without seperate extension pin
  • non shock proof
45,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7301

Spark plug terminal universal 5 kOhm

Best terminal without metalcoat for all versions of sparks.
Good replacment as the old type of spark plugs with thread type M18.
Resistance type suppressor: 5kOhm
producer: NGK
inclusive rubber seal for ignition wire and spark plug.
9,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7724

Spark plug M18 - 175, *ISOLATOR*

M18 spark plug. This part is an NOS spare part with thread M18 x 1,5mm.
The spanner gap is 26mm.
The heat rating is cose to 175. Can be used for wather cooled two stroke engines like Wartburg, Barkas, Framo, ZW1103
12,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 1192

Spark plug M18 - 260, NGK

Spark plug for using at tow stroke engines with thread M18.
Good replacement for the original spare part (T18).
The heating rate complies 260 (cold spark plug), best use for water and air cooled engines special for tuning engines.
Made by NGK, Japan.
Bosch Nr. M260 T1
13,11 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7531

Spark plug M18 - 225, NGK

Spark plug for using at tow stroke engines with thread M18.
Good replacement for the original spare part (T18).
The heating rate complies 225 (cold spark plug), best use for water and air cooled engines.
Made by NGK, Japan.
Bosch Nr. M225 T1
11,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7530

Spark plug M18 - 175, NGK

Spark plug for using at tow stroke engines with thread M18.
Good replacement for the original spare part (W18).
The heating rate complies 175 (warm spark plug), best use for water cooled engines.
Made by NGK, Japan.
Bosch Nr. M175 T1
spanner gap: SW 21
11,32 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7529

switch unit for ignition look switch

Switch insert for ignition look.
Electrical part of ignition look switch wich is mounted at the backside.
Latest version with six blad terminals.
Best quality form the original manufacture made in Germany.
Fit to Wartburg 353, 1.3, Barkas B1000 and B1000-1
original spaer part number: 8630.10
19,72 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7719

Ignition look (second hand) W353

Complete unit with key switch for ignition and starter (with key)
Fit to all Wartburg 353.
Please note: secound hand spare part.
86,84 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7280

Brush for spark plugs

Brass brush for cleaning of spark plugs.
  • material: brass / wood
  • made in Germany
  • one piece will be needed
4,74 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8566
The complete offer in Spare parts and accessories for the Wartburg 353 ignition

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas