This site in german: Wartburg 353 > Ersatzteile > Motor > Kupplung 
You are here: > Wartburg 353> Spare parts> Engine> clutch
Navigation

clutch system

The complete offer in clutch system

clutch sets

Clutch set *W353* (for vintage up to 05/1985)

This clutch set fits to all variants of Wartburg 353 with a vintage up to 05/1985 and also for type 312.
All parts are in Germany overhauled exchange parts.
The worn out clutch have to be shiped to our company in advance for repairing.
1x clutch disc and 1 clutch Wartburg 35 up to 5-1985

content:


All parts were made or overhauled in Germany.
If the clutch slips during driving with 3. or 4. gear, the clutch components have to change.
Made in GermanyOverhaul part, please send the clutch and clutch disc in advance to our company
249,13 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6556

Clutch set *W353* (for vintage from 05/1985 onwards)

If the clutch slips during driving with 3. or 4. gear, the clutch components have to change.

This clutch set fits to all variants of Wartburg 353 with a vintage from 05/1985 onwards.
content:

All parts were made or overhauled in Germany.
For more informations to this exchange part please use the Detail button.
Made in GermanyDelivery only in exchange! Please send in advance 1x clutch and 1x clutch disc original IFA to our company.
249,13 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6558

Clutch set *W353* (for vintage from 05/1985 onwards)

If the clutch slips during driving with 3. or 4. gear, the clutch components have to change.

This clutch set fits to all newer variants of Wartburg 353 with a vintage from 06/1985 onwards.

content:


All parts were imported from (mostly east European) foreign countries. The Quality of these parts are incomparable to the quality of parts made in Germany. The working life could be lower, the meantime between failure could be lower, because the materials have not the same quality.
Made in EU
125,67 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6559

Single parts of clutch system

Friction surface for clutch disc (W353/B1000/M24)

Set of two pieces friction surfaces for clutches 180mm diameter.
Best for self made at the worn out clutch disc.
Fit for all variants of Wartburg 353 (without vintage limit), for Barkas B1000 (vintage up to 02/1985) and also for Multicar M24
  • size: 180x124x3,5mm
  • complete pree drilled
  • made in germany
Made in Germany
52,36 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7672

Clutch disk (W353/B1000/M24), Made in Germany

clutch disc with springs

fit for all variants of Wartburg 353, for Barkas B1000 (vintage up to 02/1985) and also for Multicar M24
diameter: 180 mm
Please note:

Exchange part

Delivery only in exchange, you have to ship one overhaulable clutch disk in advance !
Overhauled in GermanyDelivery only in exchange, you have to ship one overhaulable clutch disk in advance !
135,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3100

Clutch disk W353, Made in EU

clutch disc with springs

fit for all variants of Wartburg 353 and for Barkas B1000 up to 02/1985
diameter: 180 mm
Made in EU (mostly East European)
40,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6560

Clutch up to 6/85

Clutch for Wartburg 353 models up to year June 1985.
Complete overhauled exchange part. The worn out part have to be shiped to our company in advance.
  • fit to clutch disc diameter 180mm (type 180DER oder 180DE2R, our order no. 3100)
  • with additional thrust bearing for old version of release bearing
  • one piece will be needed
Made in GermanyDelivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
184,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3101

Clutch W353 from vintage 6/85 onwards

Clutch for Wartburg 353 models with vintage from June 1985.
  • fit to clutch disc diameter 180mm (type 180DER oder 180DE2R, our order no. 3100)
  • without additional thrust bearing for release bearing
  • one piece will be needed
Made in GermanyDelivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
128,52 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3102

Clutch release bearing W353 up to 6/85; B1000 up to 02/1985

Clutch release bearing for cluch fit to the following car:
  • Wartburg 353, up to year 06/1985
  • Barkas B1000, up to 02/1985 (in tandem with clutch disc with diameter of 180 mm)
34,13 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3104

Clutch release bearing from 6/85

letest version of clutch release bearing for Wartburg 353
  • made in Europe
  • fit to all Wartburgs from vintage June 1985 onwards
38,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3105

Spring for clutch release bearing up to 6/85

Snap clamp for mounting the pressure bearing at the release shaft.
Type: old version of pressure bearing.
This part is an new reproduction made in Germany. Best replacement for the original ones.
Clip is made of spring steel.
Two pieces will be needed.
Surcace: blank.
Fit to the following car types:
  • Wartburg 353 up to 6-1985 Limousine and Tourist
  • Barkas B1000 up tp 3-85 with clutch D=180mm
  • Multicar M22
  • two pieces will be needed
Special offer normaly 2,99 € now 2,19 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7956

Spring for clutch release bearing from 6/85

Snap clamp for mounting the pressure bearing at the release shaft.
Fir to the following car types:
Wartburg 353 ab 6-1985 Limousine and Tourist
Trabant 1,1 without vintage limit Kombi and Limousine
Wartburg 1,3 without vintage limit Tourist and Limousine
Barkas B1000 ab 3-85 with clutch D=200mm
Barkas B1000-1 without vintage limit
2,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7328

Cluch cable complete original

Bowdencable with grease nipple for the Wartburg 353 cluch. Fit to all models.
  • total length: 55 cm
  • lenght of the cover: 30 cm
  • original spare part
85,20 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8068

Cluch cable complete

Bowdencable without grease nipple for the Wartburg 353 cluch. Fit to all models.
  • total length: 55 cm
  • lenght of the cover: 29 cm
  • made in EU
36,21 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3110

Retainer spring for clutch cable

Retainer wire to fic the clutch cable at the vehicle frame or holder.
Can be used for Fahrzeuge: Wartburg 311,312, 313, Wartburg 353 and 1.3 and Barkas B1000 und B1000-1.
High quality reproduction.
  • material: spring steel
  • one piece will be needed
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8313

Spring for clutch pedal

Release spring for the pedal system at the Wartburg 353 and Wartburg 1,3.
Will be mounted on one hand at the clutch pedal and on the other side at the car body.
The spring supports the pedal reset of the clutch pedal.
  • material: steel
  • surface: galvaniced
  • one piece will be needed
  • delivery as an single part
  • best replacement and high quality, made in Germany
4,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8209

sleeve for cluch cable

sleeve for clutch cable of Wartburg 353 (2-stroke) and Wartburg 1.3 (4-stroke)
  • length: 90mm
  • lenght (short): ca. 55mm
  • inner diameter big: 12mm
  • inner diameter small: ca. 6mm


Subject to availability (no regular range)!
8,80 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6370

Rivet set for clutch facing ( 12 pices )

Tubular rivet for cluch facing. Like the original ones made of steel.
Fit to the clutch linings of:
  • Trabant 601 D=160mm old- (fixede) and late- (tongued) clutch disc
  • Trabant1.1 clutch disc
  • Wartburg 353 D=180mm clutch disc
  • Barkas B1000 D=180mm and 200mm clutch disc
  • Wartburg 1.3 clutch disc
  • Barkas B1000-1 clutch disc

  • ideal for self repair
  • scope of delivery 12 pieces
  • material: steel
  • made in Germany
4,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 664

Brake pipe spanner 10-11mm angled

Special tool for mounting or demounting of screw-cap for brakelines.
type: level angleded
Fit to brake screws SW10 and SW11.
12,47 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7702

brake-cleaner 600ml

quick-cleaner for brake and clutch parts
  • FCKW free
  • volume: 600 ml
  • type: AD
  • delivery as an single spray
price 7,62 Euro / liter
4,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6252

Brake pipe spanner 12-13mm, straight

Special tool for mounting or demounting of screw-cap for brakelines.
type: sraight
Fit to brake screws SW12 and SW13.
12,43 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7992

Brake pipe spanner 10-11mm, straight

Special tool for mounting or demounting of screw-cap for brakelines.
type: sraight
Fit to brake screws SW10 and SW11.
9,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7703

Brake-cleaner XXL 850ml

quick-cleaner for brake and clutch parts
  • FCKW, aceton free
  • volume: 850 ml
  • delivery as an single spray
price 5,29 Euro / liter
4,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7898

Brake-cleaner, one packing unit, 12x Sprayer 600ml

Complete packing unit quick-cleaner for brake and clutch parts
  • FCKW free
  • content: 12x sprayer with volume of 600 ml
That implies a price of a single sprayer of 3,90 €price 6,50 Euro / liter
46,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7033
The complete offer in clutch system

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas