This site in german: Wartburg 353 > Ersatzteile > Karosserie 
You are here: > Wartburg 353> Spare parts> car body parts

car body parts,

The complete offer in car body parts,

Pedal set overhauling

Refreshing of your delivered pedals.
The clutch and the brake pedal will be striped, sand blasted and with 2-K colour painted.
The four red bronce joint bushes for the pedal eye will be pressed in and reaming at the correct size for the pedal pin.
The new pedal shaft is part of the delivery.
{L[delivery inclusive two snap rings and rease nipple][fit to Wartburg 353 and Wartburg 1.3][Made in Germany]
For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
267,75 €inclusive VAT, plus shipping costs

Art.No. 7884

Pedal shaft set

Shaft for the brake pedal and clutch pedal. The pin is mounted at the frame driver side front left hand, and have to be fixed with two snap rings.
Scope of delivery inclusive four red bronce joint bushes for the pedal eye, two snap rings and grease nipple.
Fit to Wartburg 353 and Wartburg 1.3
One piece will be needed.
Made in Germany.
130,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7554

Spring for brake pedal

Release spring for the pedal system at the Wartburg 353 and Wartburg 1,3.
Will be mounted on one hand at the brake pedal and on the other side at the car body.
The spring supports the pedal reset of the brake pedal.
  • material: steel
  • surface: galvaniced
  • one piece will be needed
  • delivery as an single part
  • best replacement and high quality, made in Germany
4,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8208

Spring for clutch pedal

Release spring for the pedal system at the Wartburg 353 and Wartburg 1,3.
Will be mounted on one hand at the clutch pedal and on the other side at the car body.
The spring supports the pedal reset of the clutch pedal.
  • material: steel
  • surface: galvaniced
  • one piece will be needed
  • delivery as an single part
  • best replacement and high quality, made in Germany
4,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8209

Spring for batten stripes

Wire spring for mounting the mouldings. Fit for Wartburg 311, 312, 313, and Wartburg 353.
This holder clip looks like an eyeglasses frame.
Best reproduction made in Germany.
  • material: steel
  • surface: galvaniced
  • Price per piece
  • delivery as an single part
  • best replacement and high quality, made in Germany
1,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8213

Sealing plate for hand brake lever (W353/W1.3)

Sealing plate for hand brake lever mounted at the care frame - body.
Fit to all variants of Wartburg 311, 312, 313, 353 und 1.3 (4-takt)
This part is an new reproduction, best replacement for the original one. Made from our own produced moulding tool.
  • material: oel and grease resistant rubber (NBR), colour black
  • Reproduction in best quality
  • made in Germany
  • one piece will be needed for each car
27,80 €inclusive VAT, plus shipping costs

Art.No. 7004

coiled spring pin for door hinge

coiled spring pin for all hinges of side doors of Wartburg 353 and 1.3

two coiled spring pins will be needed for each door (two hinges)
length: 60mm
1,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7093

Double jet for windscreen washer, original

Jet for windscreen cleaning. Can be used for mechanical and electrical wash pump.
made in Germany
colour: black
original spare part number: 9.0004
4,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7298

Retainer for windscreen washer, original

Metal holder for jet for windscreen cleaning. Can be used for mechanical and electrical wash pump.
Fit to all Single or double washer jets made in GDR.
steel metal, spring steel, surface blank
original spare part number:WN 9015
2,19 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7443

Single jet for windscreen washer, original

Jet for windscreen cleaning. Can be used for mechanical and electrical wash pump.
Washer jet with only one adjustable jet.
made in Germany
colour: black
original spare part number: 9.0002
4,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7444

Double jet for windscreen washer

Simpe and universal kind of double jet. Can be used for mechanial or electrical windscreen washer pumps.
Delivery inclusive sealing and mounting nut.
Fit to washer hoses:
PVC Intake line for windscreen washer (ID=4mm)
PVC Intake line for windscreen washer (ID=5mm)
Made in Europe
3,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1124

Rubber cover for pedal

Rubber cover fit to brake pedal and clutch pedal
Fit to Wartburg 353 and Wartburg 1.3, too.
  • for each pedal fou will need one piece
  • material: soft rubber
  • colour: black
Part-No. 53 01403 906
3,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7021

Ring car body

Rubber ring to connect the car body at the frame (chassis) of the Wartburg 353 and Wartburg 1.3.
New german reproduction.
Mounting place: front, middle and rear fixing point.
  • for each car 10 pieces will be needed
  • material: rubber
  • colour: black
  • outside diamter: 42mm
  • inside diameter: 24m
  • thickness: 10,5mm
Part-No. 53 04001 903
4,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7425

Buffer car body

Rubber buffer to connect the car body at the frame (chassis) of the Wartburg 353 and Wartburg 1,3.
This rubber is new produced in Germany. High quality.
Mounting place: front, middle and rear fixing point.
  • for each car 10 pieces will be needed
  • material: rubber
  • colour: black
  • diamter big: 42mm
  • diameter small: 23m
  • length of the step: 11mm
  • total length: 29mm
Part-No. 53 04000 107
6,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7424

Retainer for car body W353

Support holder to connect the car body at the frame (chassis) of the Wartburg 353.
Mounting place: middle of the cassis front and rear fixing point.
  • for each car four pieces will be needed
  • material: steel
  • surface: galvaniced
Part-No. 53 04054 505
16,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7423

Rubber profile for sunshine roof

Sealing rubber for Wartburg 353 and 1,3 sliding roof.
  • length: 2,25 m
  • price per piece
  • material: rubber
  • colour: black
  • made in Germany
  • one piece will be needed
24,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6673

Rubber profile for wind deflector, sunshine roof

Sealing rubber for Wartburg 353 and 1,3 wind deflector, sliding roof.
  • length: 1,10 m
  • price per piece
  • material: rubber
  • colour: black
  • made in Germany
  • one piece will be needed
price per piece
16,21 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8568

Handle for sunshine roof

Turning handle for Wartburg 353 and 1,3 sliding roof.
New production, made of plastic.
Please note: only fabricated part, the surface have to be finished byself.
  • diameter: 93mm
  • material: plasic
  • colour: ivory
  • made in Germany
  • one piece will be needed
fabricated, not finished survace !
35,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8385

Outer rear view mirror, left

18,96 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 3535

Outer rear view mirror, right

18,96 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 3540

Fuel tank plug, lookable

Fuel plug complete delivered with keys for looking.
25,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6238

Bayonet fuel tank plug, lookable

Fuel tank plug with look and key.
produced by Hella
made in Germany
18,98 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 3545

Profile for external door-duct, set

One Set of door sealing for external door-duct weather strip.
The new in Germany producted sponge rubber compared with the original one. High quality.
Fit to Wartburg 353 limousine and tourist.
Scope of delivery: complete for all doors leng 16 meter.
  • vintage limit: Wartburg 353 up to 5-85 (cooling radiator behind the engine block)
  • material: sponge rubber
  • colour: black
  • made in Germany

Additional needed accessory, not part of the product, have to be ordered separatly.
1x Contact adhesive 350ml (LDM-part.-no.:8308)

necessary special tools for assembly / disassembly:
- no special tools needed
price 8,80 Euro / meter
140,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6051

Set of profile for external door-duct

One set of door sealing for external door-duct weather strip Wartburg 353 and Wartburg 1,3. Complete for all four doors.
New producded microcellular rubber profile in best quality, made in Germany.
This kit of door sealing fit to the model type Wartburg Limousine. Delivery as one piece. The profil is has to be separate cutted for each door.
  • Sealing rubber, colour: black
  • for Wartburg 353 from vintage 6-85
  • made in Germany
  • one set will be needed

Additional needed accessory, not part of the product, have to be ordered separatly.
1x Contact adhesive 350ml (LDM-part.-no.:8308)

necessary special tools for assembly / disassembly:
- no special tools needed
Price per Meter: 9,88 Euro/m
158,03 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6113

Set of profile for external door-duct Tourist

One set of door sealing for external door-duct weather strip Wartburg 353 and Wartburg 1,3. Complete for all four doors.
New producded microcellular rubber profile in best quality, made in Germany.
This kit of door sealing fit to the model type Wartburg Tourist. Delivery as one piece. The profil is has to be separate cutted for each door.
Please note: the kit only include sealings the four doors. Not the hatchback!
  • Sealing rubber, colour: black
  • for Wartburg 353 from vintage 6-85
  • made in Germany
  • one set will be needed

Additional needed accessory, not part of the product, have to be ordered separatly. 1x Contact adhesive 350ml (LDM-part.-no.:8308)

necessary special tools for assembly / disassembly:
- no special tools needed
price per Meter: 9,88 Euro/m
158,03 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6114

Door sealing driver / codriver door

Single profile rubber of door sealing for external door-duct weather strip Wartburg 353 and Wartburg 1,3.
Can be used for the dirver or co driver door front left or right hand.
New producded microcellular rubber profile in best quality, made in Germany.
This kit of door sealing fit to the model type Wartburg Limousine. Delivery as one piece. The profil is has to be separate cutted for each door.
  • delivery as single part (one door)
  • Sealing rubber, colour: black
  • for Wartburg 353 from vintage 6-85
  • made in Germany
  • 2 pieces will be needed

Additional needed accessory, not part of the product, have to be ordered separatly.
1x Contact adhesive 350ml (LDM-part.-no.:8308)

necessary special tools for assembly / disassembly:
- no special tools needed
Price per Meter: 11,11 Euro/m
44,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8427

Spring for door look, front

Spring fpr the opening mechanism of the front door looks.
Delivery as an single part.
  • fit for all kind of Wartburg 353 and 1,3 (all models Limousine and Tourist), Barkas, Multicar M24 / M25 and W50.
  • mounting place: driver and codrivers door
  • made in Germany
  • two pieces will be needed
1,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8202

Sealing plate for flasher stop tail lamp

Sealing for the rear lights of the Wartburg 353 (all models Limousine and Tourist)
Colour black, fit to right or left hand Wartburg 353.
Original spare part.
Special offer normaly 12,45 € now 6,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6053

Cable gland for number plate lights W353

Sealing for the electrical wire harness of the right or left registration plate lights. The grommet will be mounted at the hole inside the rear floor panel / boot body. protection against dust an moisture.
  • material: rubber, black
  • fit to Wartburg 353
  • two pieces will be needed
0,92 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7873

Cable gland for flasher stop tail lamp W353

Sealing for the electrical wire harness of the right or left rear lights. The grommet will be mounted at the hole inside the rear boot body. protection against dust an moisture.
  • material: rubber, black
  • fit to Wartburg 353
  • two pieces will be needed
0,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7872

Taillight W353

Flasher stop tail lamp for Wartbrug 353 Limousine und Tourist.
Fit at the vehicle right and left hand.
Scope of delivery 1x rear light lense + 1x base carrier.
  • Original spare part
  • two pieces will be needed
29,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7466

light for number plate, black W353

Complete lamp for number plate ligthing fit to rear bumper of Wartburg 353 and Wartburg 1.3 Trans (rare pickup-type of Wartburg)
  • two pieces will be needed for one bumper

Consist of:
  • Cover cap, black
  • lens
  • upper gasket
  • socket incl. bottom case
  • bottom gasket
  • holder bracket incl. mounting bolt
original spare partParts-No. from spare parts list: 91 18000 692 (W353) / 91 18001 347 (W1.3)ZAK-No. from spare parts list: 136 65 55 018 930 018 (W353 + W1.3)
49,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6611

Lense for number plate lights, W353

Clear plastic lense for the number plate ligthing fit to rear bumper of Wartburg 353 and Wartburg 1.3 Trans (rare pickup-type of Wartburg)
Can be used for the black and chrome models of the nuber plate spots.
  • two pieces will be needed for one bumper
  • delivery as an single part
  • original spare part
original spare part number: 8528.5-200:2
3,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7707

light for number plate, chrome W353

Complete lamp for number plate ligthing fit to rear bumper of Wartburg 353 and Wartburg 1.3 Trans (rare pickup-type of Wartburg)
  • two pieces will be needed for one bumper

Consist of:
  • Cover cap, chrome
  • lens
  • upper gasket
  • socket incl. bottom case
  • bottom gasket
  • holder bracket incl. mounting bolt
original spare partParts-No. from spare parts list: 91 18000 692 (W353) / 91 18001 347 (W1.3)ZAK-No. from spare parts list: 136 65 55 018 930 018 (W353 + W1.3)
92,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7257

Seal for indicator insert, front

Rubber sealing for the front indicator insert. Fit to left and right hand.
fit to all Wartburg 353
original spare part
20,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6052

Cable control for bonnet look

Bowdencable for unlock engine bonnet Wartburg 353 and Wartburg 1,3
Made in germany.
  • length: 1800mm
  • one piece will be needed
15,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3505

rubber buffer for bonnet and luggage compartment lid

rubber buffer for bonnet and luggage compartment lid of Wartburg 353 and Wartburg 1.3
colour: black
follow pieces will be needed:
  • bonnet W353: 4 pieces
  • luggage compartment lid W353: 2 pieces
  • bonnet W1.3: 4 pieces
  • luggage compartment lid W1.3: 2 pieces


no original spare part
original-spare part no.: 53 06009 105
4,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6567

Mudflaps rear Wartburg

One paar of dirt traps for the monting at the rear wheel housing.
Fit to the cars Wartburg 353 and Wartburg 1.3.
  • colour: black
  • material: rubber
  • scope of delivery one set (two pieces)
  • made in EU
14,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7260

edge protection, front doors

edge protection for sheet metall fold on inner side of doorway of driver and co-driver door (fold will be used as end stop of front door)
Fit to all Wartburg 353 ande Wartburg 1,3 at the body types Limousine, Tourist and Trans.
The edge protection is to mount on the right, left (A- and B-pillar) and upper side of doorway.
  • material: plastc profile, black
  • Length: 2610mm (information according to spare parts catalogue)
  • original spare part
  • we will deliver one piece of 2,70m
  • two pieces will be needed
Parts-No. from spare parts catalogue: Profil 53 05216 200 (Panelling for edge, front)price: 9,20 Euro / meter
24,84 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6014

Edge protection, rear door

Edge protection for sheet metall fold on inner side of doorway of rear doors (fold will be used as end stop of front door)
Fit to all Wartburg 353 ande Wartburg 1,3 at the body types Limousine and Tourist.
The edge protection is to mount on the right, left (C- and B-pillar) and upper side of doorway.
  • material: plastc profile, black
  • Length: 2740mm (information according to spare parts catalogue)
  • original spare part
  • we will deliver one piece of 2,80m
  • two pieces will be needed
Sach-Nr. aus Ersatzteilkatalog: Profil 53 05216 200pice: 9,20 Euro / meter
25,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6013

Weather strip bottom plate - doors

Sealing rubber section between bottom plate (frame side member) and side doors
The weather strip will be mounted along the frame side meber on bottom side of entrance edge. It is an additional sealing against spray water in area under the doors.
  • fit to Wartburg 353 and Wartburg 1.3
  • fit to car body variants: Limousine and Tourist
  • length: 1,58m
  • two pieces needed for one car (one for every side)

For car body variant Wartburg Trans (Pick-up) the same rubber section will be needed but the length is not the same (length unknown).
Parts-No. from spare parts catalogue: 53 06022 512price per piece
38,09 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6641

Weather strip bottom plate - doors (older version)

Sealing rubber section between bottom plate (frame side member) and side doors
The weather strip will be mounted along the frame side meber on bottom side of entrance edge. It is an additional sealing against spray water in area under the doors.
  • fit to Wartburg 353 first models
  • fit to car body variants: Limousine and Tourist
  • length: 3,00m
  • two pieces needed for one car (one for every side)
Price per piece
33,74 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8569

Weather strip for luggage compartment

Selaing rubber for the car boot variante: Limousine
Fit to Wartburg 353 and Wartburg 1.3.
One piece needed for each car.
New production made in Germany

Additional needed accessory, not part of the product, have to be ordered separatly.
1x Contact adhesive 350ml (LDM-part.-no.:8308)

necessary special tools for assembly / disassembly:
- no special tools needed
Parts-No. from spare parts catalogue: Profil 53 06003 710price per pice
50,07 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3220

Dolphin pile for engine bonnet

self-adhesive sound absorbing mat for engine bonnet
  • with polyurethane surface coating
  • colour: grey
  • content: 2x mat with 500 x 1000mm (=1qm)
Price: 134,32 Euro / m²
134,32 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6751

Bitumen/plastic plates, foil-laminated

Self-adhesive absorbing plates for sheet metal parts (car doors, computer cases or something else).
  • with aluminium foil-laminated
  • colour: silver
  • content: 6x pltes with 500 x 250mm
  • thickness: about 2mm
  • weight per unit of area: 3,7 kg/m²
Price: 87,55 Euro / m²
72,23 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6891

Inner rear view mirror Wartburg

Panorama mirror for the Wartburg 353 and 1.3 indoor.
The spare part is original made in Germany.
  • lenght: 24,5 cm
  • wide: 7 cm
  • inckusive plastic feet for mounting at the roof fram
19,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1264

Alu Spray 400ml

Spray on the basis of special mixture of resins and aluminium pigments.
Aluminium-zinc doubleprotection.
Best resistance to high temperatures.
Excellent for use at exhaust systems and for car body works.
  • contens: 400ml
  • product is free of FCKW
  • heat resistance up to approx 800 °C
price: 46,05 Euro / liter
18,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7493

Rubber membrane plug for holes with diameter of 15mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 15 mm
inner diameter of membrane (max. usable diameter): 9 mm
outer diameter (total): 20 mm
0,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6796

Rubber membrane plug for holes with diameter of 18,5mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 18,5 mm (0,728")
inner diameter of membrane (max. usable diameter): 11 mm (0,433")
outer diameter (total): 23 mm (0,906")
0,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6895

Rubber membrane plug for holes with diameter of 28mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 28 mm
inner diameter of membrane (max. usable diameter): 21 mm
outer diameter (total): 35 mm
1,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6798

Rubber membrane plug for holes with diameter of 32mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
  • fit to hole diameter of 32 mm
  • inner diameter of membrane (max. usable diameter): 25 mm
  • outer diameter (total): 39 mm
  • thicknes of the menbrane: 1mm
  • total thickness: 9mm
2,23 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7613

Rubber membrane plug for holes with diameter of 47mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
  • fit to hole diameter of 47 mm
  • inner diameter of membrane (max. usable diameter): 36 mm
  • outer diameter (total): 54 mm
  • thicknes of the menbrane: 1mm
  • total thickness: 10mm
2,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6800
1+1

Rubber membrane plug for holes with diameter of 20,5mm

Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 20,5 mm
inner diameter of membrane (max. usable diameter): 13,5 mm
outer diameter (total): 25 mm
thickness: 7 mm
1,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6797

Rubber membrane plug for holes with diameter of 25mm

Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 25 mm
inner diameter of membrane (max. usable diameter): 18,5 mm
outer diameter (total): 30,5 mm
thickness: 7 mm
1,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7625

Rubber membrane plug for holes with diameter of 37mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 37 mm
inner diameter of membrane (max. usable diameter): 29 mm
outer diameter (total): 44 mm
1,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6799

Plug for body

Small plug for holes diameter 5mm.
Can be used for the car body.
  • material: rubber, black
  • total length: 27mm
  • made in Germany
2,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7705

Grinding fleece - pad, rot

Fleece to buff surfaces form coatings and cleaning of aluminium, brass ec.
Can be used for working by hand.
  • Price per pice
  • Pice size: 100x10mm and 20cm long
  • Rauheit: very fine: 320
Price: 5,35 Euro / Meter
1,07 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7889

Underbody protection wax 500ml, Spray

Protecton wax for the underside and wheel cases for many vehicles.
To spray the wax no special tools will be needed.
Recommended amount 300g/qm, source function 1,5qm.
Best use for body work, vehicle manufacturing and road maintenance.
The wax protect the cars against mechanical and chemical stress like rock chips, gritting salt, water and so on. And corrosion will be bewared.
  • contens: 500ml
  • corrosion protection at salt dust like DIN 50021: 500 hours without rost
  • Dust dry after 2 hours, dry after 4-5 hours
  • temperature from -25° C bis 80° C
  • wax based product
  • colour: brown
Price: 18,76 Euro / Liter
9,38 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8088

Underbody protection wax 1000ml

Protecton wax for the underside and wheel cases for many vehicles.
To spray the wax an special atomizer pistol lance will be needed.
Recommended amount 300g/qm, source function 3-4qm.
Best use for body work, vehicle manufacturing and road maintenance.
The wax protect the cars against mechanical and chemical stress like rock chips, gritting salt, water and so on. And corrosion will be bewared.
  • contens: 1000ml
  • corrosion protection at salt dust like DIN 50021: 500 hours without rost
  • Dust dry after 2 hours, dry after 4-5 hours
  • temperature from -25° C bis 80° C
  • wax based product
Price: 10,67 Euro / Liter
10,67 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8087

Steering wheel Wartburg

Steering wheel for Wartburg, made in Europe.
  • fit to Wartburg 312, 353 and 1.3 modells like Limousine, Tourist, Camping and Trans
  • delivery as an single part
  • one pieces will be needed
123,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8268

Underbody protection 1000ml

Protecton wax for the underside and wheel cases for many vehicles.
To spray the underbody an special atomizer pistol lance will be needed.
Best use for body work, vehicle manufacturing and road maintenance.
The bitumen protect the cars against mechanical and chemical stress like rock chips, gritting salt, water and so on. And corrosion will be bewared.
  • contens: 1000ml
  • corrosion protection at salt dust like DIN 50021: 500 hours without rost
  • Dust dry after 4-5 hours
  • dry afer 24 houers
  • temperature from -25° C bis 80° C
  • bitumen based product
Price: 21,10 Euro / Liter
21,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8293

Look for Wartburg car boot

Look for the Wartburg Limousine car boot.
Fit to the cars Wartburg 353 and Wartburg 1.3 Limousine
  • Original spare part
  • delivery inclusive rubber seal
  • inclusice 1 key
  • NOS
  • one piece will be needed

If you need an secound key, here you can order one piece extra:
key manufacture by number (LDM-Art.-Nr.:1341)
46,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8343

Body-cavity sealing, Elaskon 1000ml

Protecton wax for the body cavity and frames for many vehicles.
To spray the wax will be an special atomizer pistol lance will be needed.
Recommended amount 250g/qm.
Best use for body work, vehicle manufacturing and road maintenance.
The wax protect the cars against mechanical and chemical stress like rock chips, gritting salt, water and so on. And corrosion will be bewared.
  • contens: 1000ml
  • Dry after 4-8 hours
  • temperature from -25° C bis 80° C
  • wax based product
Price: 14,70 Euro / Liter
14,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8404

Compressed air underbody protection gun

simple air gun for spray off protecton wax at the body and frames for many vehicles.
Best use for body work, vehicle manufacturing and road maintenance.
  • delivery inclusive additional cavity tube
46,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8421

Compressed air underbody protection gun

Simple air gun for spray off protecton wax at the body and frames for many vehicles.
Best use for body work, vehicle manufacturing and road maintenance.
  • only use for underbody protection
30,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8422

Zinc-alu Spray 400ml

Spray on the basis of special mixture of resins and aluminium pigments.
Aluminium-zinc doubleprotection.
Best resistance to high temperatures.
Excellent for use at exhaust systems and for car body works.
  • contens: 400ml
  • product is free of FCKW
  • heat resistance up to approx 300 °C
price: 22,25 Euro / liter
8,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8428

Profile for rear door, Wartburg 353 Tourist

Rubber rear door / boot sealing of the Wartburg 353 station wagon.
The new in Germany producted sponge rubber compared with the original one. High quality.
Fit to Wartburg 353 Tourist.
  • price per piece)
  • material: sponge rubber
  • colour: black
  • made in Germany

Additional needed accessory, not part of the product, have to be ordered separatly.
1x Contact adhesive 350ml (LDM-part.-no.:8308)

necessary special tools for assembly / disassembly:
- no special tools needed
price 9,60 Euro / meter
43,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8497

Spring for tank plate

Torsion spring for hinged plate, fit to Wartburg 353 and Wartburg 1,3.
Will be mounted on the tank plate and car body.
The spring supports the closing of the hinged plate.
  • material: steel
  • surface: galvaniced
  • one piece will be needed
  • delivery as an single part
Original spare part number: 1342921001296301
8,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8548

Aluminium fuel tank plug, lookable

Bayonett fuel tank plug with look and two keys.
Best replacement like the original one. Made in Germany.
Please check before order if your car got an bayonet or threat fuel pipe !
22,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8549

Set of cable grommet seal

One set of cable grommet seals with different sizes.
Contens:
  • 40 pieces body hole: 6mm / wire bore: 2mm
  • 40 pieces body hole: 7,5mm / wire bore: 5mm
  • 40 pieces body hole: 9mm / wire bore: 6mm
  • 25 pieces body hole: 11mm / wire bore: 8,5mm
  • 20 pieces body hole: 12mm / wire bore: 10mm
  • 5 pieces body hole: 15mm / wire bore: 12mm
  • 5 pieces body hole : 20,5mm / wire bore: 14,5mm
  • 5 pieces body hole: 23,5mm / wire bore: 17,5mm
15,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8608

Sealing for inspection opening, rear passenger doors

One set of rubber sealings for the inspection holes of the rear passenger doors Wartburg 353 and Wartburg 1,3.
  • delivery as kit (2 pieces)
  • Sealing rubber, colour: black
  • for Wartburg 353 from vintage 6-85
  • 2 pieces will be needed


1x Contact adhesive 350ml (LDM-part.-no.:8308)

necessary special tools for assembly / disassembly:
- no special tools needed
4,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8630

Outer door handle, left side, PVC black, complete with look and key (EU)

Reproduction door handle made of plastic for Multicar, Trabant, Wartburg, Barkas, W50.
  • colour: black
  • scope of delivery complete with lock and key
  • good quality made in EU
19,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8631
The complete offer in car body parts,

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas