This site in german: Wartburg 353 > Ersatzteile > Zubehör 
You are here: > Wartburg 353> Spare parts> Accessories

Accessories

Category Accessories has the subcategory

The complete offer in Accessories

Clip for trademark

Mounting Clip for letterings.
  • Material: PVC
  • price for each piece
  • made in Europe
0,19 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1258

Inner rear view mirror Wartburg

Panorama mirror for the Wartburg 353 and 1.3 indoor.
The spare part is original made in Germany.
  • lenght: 24,5 cm
  • wide: 7 cm
  • inckusive plastic feet for mounting at the roof fram
19,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1264

Handbrake cable, complete

handbrake cable for for Wartburg (rear axle).
fit to all type of Wartburg 3 and 4 cylinder engine.
both cables are symmetric and have the same length
  • the complete lenght is 160 cm
  • 2 pieces will be needed
32,56 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3090

Sealing plate for hand brake lever (W353/W1.3)

Sealing plate for hand brake lever mounted at the care frame - body.
Fit to all variants of Wartburg 311, 312, 313, 353 und 1.3 (4-takt)
This part is an new reproduction, best replacement for the original one. Made from our own produced moulding tool.
  • material: oel and grease resistant rubber (NBR), colour black
  • Reproduction in best quality
  • made in Germany
  • one piece will be needed for each car
19,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7004

Wiper blade chrome

Original wiper blade made of stainless steeel complete with 2 leading spring arms, wiper rubber and fixing plug for wiper holder.
Please note: only fit to the original wiper arm OE-Nr.:8746.28 ! Does not fit to our offered wiper arms LDM-Art-Nr.:3210 und 7496 !!
  • length: 415mm
  • fit to all Wartburg 353 and Wartburg 1,3 models with wiper arm OE-Nr.:8746.28
  • 2 pieces will be needed
Original number: 8746.28-2
14,21 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6935

Wiper set new version

Complete wiper kit for the Wartburg lates version, wiper blade will be pinned at the wiper arm.
length og the wiper blade: 415mm
Set consists of:

  • fit to all W353 and W1,3 models
  • One set will be needed
  • made in EU
35,44 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8311

Wiper blade, new version

wiper blade complete with 3 leading spring arms, wiper rubber and fixing plug for wiper holder.
latest version of the wiper blade, it will be pinned at the wiper arm.
  • length: 415mm
  • fit to all W353 and W1,3 models
  • 2 pieces will be needed
7,14 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 3205

Wiper arm new version

wiper arm complete with tension spring and clamping sleeve for fixing
Version for pinned the wiper blade.
  • lenght: 300mm
  • fit to W353 and W1,3
  • two pieces will be needed
12,44 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 3210

Wiper blade, old version

wiper blade complete with 3 leading spring arms, wiper rubber and fixing plug for wiper holder.
Old version of the wiper blade, it will be mounted by an hock at the wiper arm.
  • length: 415mm
  • fit to all W353 and W1,3 models
  • 2 pieces will be needed

additional needed parts::
20,19 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7495

Wiper arm old version

Wiper arm complete with tension spring and clamping sleeve for fixing
Version with hock to clip in the wiper blade.
  • lenght: 360mm
  • fit to W353 and W1,3
  • two pieces will be needed
28,41 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7496
1+1

Wiper blade rubber

Rubber section for wiper blade, single part.Scope of delivery without fixing metal holder.
  • length: 415mm
  • original spare part
  • fit to all W353 and W1,3 models
  • 2 pieces will be needed
5,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6626

Windscreen wiper Tourist

Rear windshild wiper complete with wiper arm and wiper blade. Arm complete with tension spring and clamping sleeve for fixing
  • lenght of the arm: 300mm
  • lenght of the wiper blade: 330mm
  • original spare part
  • fit to W353 and W1,3
  • one will be needed
12,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6625

Tank for windscreen washer

Plastic reservoir for windscreen washer made of plasic.
This is an original spare part.
Fit for all car types of Wartburg 353 from5-85 and all Wartburg 1.3
The plasic tank is an original single part without any accesorys.
  • without cap and wash pump
  • new type form year 5-85
  • one piece will be needed

Scope of delivery:

Additional parts (not part of this offer):
original spare part
33,56 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3215

Sealing for pump windscreen washer - bottle

Rubber sealing for the pump for windshield washer at the fresh water bottle. Mounted at all Wartbrug 1,3 with tank for fresh water and Wartburg 353 from vintage march 1985.
  • material: rubber, black
  • one piece will be needed
3,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7579

Electrical pump for windscreen washer

The pump for windshield washer is a complete component. Mounted at all Wartbrug with tank for fresh waterfrom vintage march 1985.
  • Reproduction
  • delivery without sealing LDM-part-no.: 7579
  • supply voltage 12V
  • electrical connection over two flat plugs: 6,3 x 0,8
  • one piece will be needed
16,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1128

Yoke for electrical pump

Retainer for the pump for windshield washer.
Fit to all Wartbrug with tank for fresh waterfrom vintage march 1985.
  • original spare part
  • one piece will be needed
Original spare part number: 1366573005031127
3,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7454

Trademark * IFA WARTBURG*

Trademark with the lettering IFA Wartburg.
material: plastic, black
Scope of delivery complete with mounting plugs.
The tradmark will be mounted at the car body with four plastic sticks at the rear side.
5,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3550

Trademark * 353W *

Trademark with the lettering W353.
material: plastic, black
Scope of delivery complete with 2 mounting plugs.
The tradmark will be mounted at the car body with four plastic sticks at the rear side.
5,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3551

Trademark * TOURIST *

Trademark with the lettering tourist.
material: plastic, black
Scope of delivery complete with 4 mounting plugs.
The tradmark will be mounted at the car body with four plastic sticks at the rear side.
5,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3552

T-Shirt *LDM-Tuning*, white

white T-Shirt made of 100% cotton

printed lettering on front- and back-side

size: M
11,99 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6425

Bulb retainer display instruments

Holder for bulbs as an checked secound hand part. Can be used for nearly all IFA vehicles.
Type with contact pin for wire plug: 6,3x0,8 (standart)
Useabe for bulbs 6V, 12V oder 12V 2W with Ba7S base as speedometer lightning, display and indecator lights.
  • delivery without bulb and pin
  • new Reproduction
2,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7843

Bulb retainer display instruments, screw pin

Holder for bulbs with screw pin for wire connection. Can be used for nearly all IFA vehicles.
Type with contact for screw connection: up tp 1,5 mmm².
Useabe for bulbs 6V, 12V oder 12V 2W with Ba7S base as speedometer lightning, display and indecator lights.
  • new spare part
  • delivery without bulb
6,10 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7844

Retro back up lamp for rear bumper

Chromed back up light for the mounting on top of the bumber.
The lamp made of high end fabrication and the design fit brilliant to historical cars.
  • colour: chromium-plated casing, clear glass
  • size: 11 x 5,5 cm
  • delivery without bulb
  • made in Germany
  • with E-icon
134,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6876

Replacement glass for RETRO rear fog lamp

Red glass as spare part for our RETRO fog light
  • material: red glass
  • made in Germany
19,99 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7136

Retro licence plate lights

Chromed reversing registration plate light.
Mounting with two M6 nuts.
The lamp made of high end fabrication and the design fit brilliant to historical cars.
  • colour: chromium-plated casing, clear lense
  • size: L=82mm x B=29mm x H=27mm
  • bolt distance: 45mm
  • delivery without bulb
  • made in Europe
  • mit E-Zeichen
16,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7989

Retro rear fog lamp for rear bumper

Chromed reversing fog light for the mounting on top of the bumber.
The lamp made of high end fabrication and the design fit brilliant to historical cars.
  • colour: chromium-plated casing, red glass
  • size: 11 x 5,5 cm
  • delivery without bulb
  • made in Germany
  • with E-icon
159,88 €inclusive VAT, plus shipping costs

Art.No. 6877

Replacement glass for RETRO reverse lamp

Red glass as spare part for our RETRO reverse indication lamp
  • material: clear (white) glass
  • made in Germany
8,93 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7137

Speedometer with trip meter

Round speedometer for the cars Wartburg 1.3, Wartburg 353, Trabant 1.1, Barkas B1000 and B100-1.
type:
  • Speedscale up to 150km/h
  • inclusive trip meter
  • power 12V
  • delivery without bulbs and without bulb retainer
  • front rim : black
  • mounting diameter: 100mm
  • genuine spare part
  • Zak No: 3.0230/47
81,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7092

Rubber cover for ignition key

Grip rubber for mounting at the ignition key.
This spare part is an original one.
Fit for the vehicles: Trabant, Wartburg, W50, Barkas LO, LD Multicar usw.
  • material: rubber, black
  • original spare parts
  • delivery as an single part
9,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8193
Delivery only at advance payment.

Spare key, copy is made from yor key number

Production of an spare key for door, ignition or fuel cap looks and so on...
You have to tell us your key number per email, fax or letter.
Keys for the vehicles: Trabant, Wartburg, W50, Barkas LO, LD Multicar usw.
  • delivery time about one to two weeks
  • all Trabant keys possible
Please write here your keynumber in:
17,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1341
Delivery only at advance payment.

Cap for water vessel for windscreen washer system

Plastic cap with mounting sprap for the water bottle of the windscreen washer system.
The plug close up the refilling hole.
To use at many reservoir bottles with electrical or mechanical pump.

fit to follow washer systems:
Trabant 601, Trabant 1.1, Wartburg 1.3, Wartburg 353, Multicar, W50 and so on
4,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7357

Rubber carpet front, black W353 steering gear shifting

Elaborate made and exactly cuted carped with cloth edge for the Wartburg 353 limousine and tourist types with gearshifting at the steering column.
The rubber carpet will be inserted in front of the front seats to prove the original carpet against mud and moisture form the passengers shoes.
  • material: corrugated rubber, with nonslip bottom and fringe
  • made in Germany
86,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7368

Rubber carpet front, black W353 stick shift

Elaborate made and exactly cuted carped with cloth edge for the Wartburg 353 limousine and tourist types with gearshifting stick shift.
The rubber carpet will be inserted in front of the front seats to prove the original carpet against mud and moisture form the passengers shoes.
  • material: corrugated rubber, with nonslip bottom and fringe
  • made in Germany
86,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7369

Hose for R13 tires

Hose insert for the Trabant and Wartburg tires.
Fit to 13 zoll wheels.
  • for tire size: 135,145,155/ 70 R13
  • scope of delivery with tire valve and cap
15,35 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7416

Plastic cap for wiper arm

Sealing cap (single part) for the mounting place of the wiper arm.
Fit to CZ models Trabant, Wartburg and B1000.
Can be used for screw joints spanner gap SW 13.
  • material: plastic, black
  • original spare part
  • two pieces will be needed for models of Limousine
  • station wagons will need three of this spare part
0,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7440

Metal holder for water bottle

Metal retainer for the windscreen water bottles 1,5 liter of the Trabant, Muticar, B1000 and 2,5 liter of the Wartburg models.
  • original spare part
  • material: steel, surface galvaniced
  • one piece will be needed
original part number: WN 9143
5,61 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7442

Universal boot kit

Bellows for many exertions at automobiles, trailers, caravans and ships ...
size:
  • length:19cm diameter:10mm / 30mm
  • length:23cm diameter: 35mm / 35mm
  • length:15cm diameter:30mm / 42mm
  • length:13cm diameter:41mm / 48mm
  • length:12cm diameter:41mm / 55mm
  • different length and diameter combinable
  • length of the bellow pice: 95mm
Special offer normaly 14,99 € now 9,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7010

windscreen washer kit

Complete kit for windscreen washer system with electrical pump and water bottle
voltage: 12V
Scope of delivery:
  • bottle 1,5 liter
  • cap
  • metal holder
  • wash pump 12V
  • 1m plastic hose (connection pump-spray jet
  • 1 piece of two double jet washer inclusive retainer spring

fit to follow washer systems:
windscreen Trabant 601
Wartburg 353 and 1.3 Tourist rear window
56,53 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6907

electrical pump for windscreen washer

electrical pump to put into the water bottle of windscreen washer
voltage: 12V

fit to follow washer systems:
windscreen Trabant 601
rear window Wartburg 353 and 1.3 TOURIST (only for estate wagon)
42,46 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 1125

Water vessel for windscreen washer system, singel part

Water bottle for windscreen washer system, to use in tandem with electrical pump bottle
Volume: 1,5 liter
original spare part
fit to follow washer systems:
windscreen Trabant 601
Wartburg 353 and 1.3 TOURIST rear window
single part without pump, cap and metal holder
parts-no. 136 65 730
33,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6908

Ignition look (second hand) W353

Complete unit with key switch for ignition and starter (with key)
Fit to all Wartburg 353.
Please note: secound hand spare part.
86,84 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7280

Spring clip for interior lining

Clip for mounting the door trim panels or the inner wheel covers. Fit to all types of Trabant, Wartburg, Barkas and many IFA vehicles.
  • material: spring steel, surface, galvaniced
0,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1160

Spring for batten stripes

Wire spring for mounting the mouldings. Fit for Wartburg 311, 312, 313, and Wartburg 353.
This holder clip looks like an eyeglasses frame.
Best reproduction made in Germany.
  • material: steel
  • surface: galvaniced
  • Price per piece
  • delivery as an single part
  • best replacement and high quality, made in Germany
1,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8213

Steering wheel Wartburg

Steering wheel for Wartburg, made in Europe.
  • fit to Wartburg 312, 353 and 1.3 modells like Limousine, Tourist, Camping and Trans
  • delivery as an single part
  • one pieces will be needed
94,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8268

Wiper motor 12V

Wiper motor as universal unit with 12V sytem. This Repro part can be used for the car types: Multicar M22, M24, M25, Wartburg 353 and 1,3, Baraks B1000 and B1000-1, Trabant 601 (from vintage 88) and Trabant 1,1.
Inexpensive option to the original spare part.
The base plate can be turend to modificate the wiper motor for your car type.
The wire connection have to be done byself.
  • delivery as an single part
  • without wires or wire plugs
  • one piece will be needed
  • 12V system
55,69 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8357

Handle for sunshine roof

Turning handle for Wartburg 353 and 1,3 sliding roof.
New production, made of plastic.
Please note: only fabricated part, the surface have to be finished byself.
  • diameter: 93mm
  • material: plasic
  • colour: ivory
  • made in Germany
  • one piece will be needed
fabricated, not finished survace !
35,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8385

Bulb retainer display instruments, additional negative terminal

Holder for bulbs as an new reproduction part. Can be used for nearly all IFA vehicles.
Type with two contact pins for wire plug: 6,3x0,8 (standart)
1x pin for plus terminal (+) and 1x pin for negative pin (-)
Useabe for bulbs 6V 2W or 12V 2W with Ba7S base as speedometer lightning, display and indecator lights.
  • New repoduction
  • delivery without bulb
  • made in EU
3,80 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8443
The complete offer in Accessories

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas