Exhaust system

The complete offer in Exhaust system

heat protection ribbon

Detail

ribbon made of heat resistant fabric
to lag hot exhaust pipes to protect flanking parts

width: 50 mm
length: 15 m

89,90 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6475

Tuning Pre - silencer Detail tuning pree-selincer for Trabant two stroke engine up to 36 hp.
Bitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen.	200,17 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 2000

Connection - pipe for tuning pre silencer

Detail

Connection - pipe for tuning pre silencer.
Fit only together with our tuning after muffler LDM part no 2003 !

length: 2,00 m
diameter: 45mm
one piece will be needed

Bitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen.Please note: Additional fees for shipping bully goods

125,81 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 2001

Complete set, tuning pre-silencer and connection-pipe Detail Complete set, tuning pre-silencer and connection-pipe. Please note: this set only fit together with tuning after muffler LDM-part.no: 2003 !
Bitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen.Please note: Additional fees for shipping bully goods	345,62 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 2002

Aftermuffler 45mm pipe Detail Fit to the tuning exhaust system of Trabant with two stroke engine.
Bitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen.	180,51 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 2003

pipe bend 15° pipe-diameter: 45mm stainless steel

Detail

ideal for self-made stainless steel exhaust systems

universal pipe bend with an outer diameter of 45mm
15° bent piece of pipe
one side widened (inside diameter = 45mm)

without approval

28,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7193

pipe bend 30° pipe-diameter: 45mm stainless steel

Detail

ideal for self-made stainless steel exhaust systems

universal pipe bend with an outer diameter of 45mm
30° bent piece of pipe
one side widened (inside diameter = 45mm)

without approval

28,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7195

pipe bend 45° pipe-diameter: 45mm stainless steel

Detail

Ideal for self-made stainless steel exhaust systems

universal pipe bend with an outer diameter of 45mm
45° bent piece of pipe
one side widened (inside diameter = 45mm)

without approval

32,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7194

pipe bend 60° pipe-diameter: 45mm stainless steel

Detail

ideal for self-made stainless steel exhaust systems

universal pipe bend with an outer diameter of 45mm
60° bent piece of pipe
one side widened (inside diameter = 45mm)

without approval

34,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6460

pipe bend 90° pipe-diameter: 45mm stainless steel

Detail

ideal for self-made stainless steel exhaust systems

universal pipe bend with an outer diameter of 45mm
90° bent piece of pipe
one side widened (inside diameter = 45mm)

without approval

38,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6461

0,5 m pipe, diameter: 45mm stainless steel Detail ideal for self-made stainless steel exhaust systems or for repair of existing defective exhaust pipes universal pipe bend with an outer diameter of 45mm length total: 0,5 m one side widened (inside diameter = 45mm)
without approval	19,99 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6465

1m pipe, diameter: 45mm stainless steel Detail ideal for self-made stainless steel exhaust systems or for repair of existing defective exhaust pipes universal pipe bend with an outer diameter of 45mm length total: 1 m one side widened (inside diameter = 45mm)
without approval	27,99 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6464

pipe clamp 45mm stainless steel Detail pipe clamp made of stainless steel strip for exhaust pipes with an outer diameter of 45mm ideal for our universal parts of stainless steel exhaust pipes
4,55 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6462

mounting hook for exhaust parts stainless steel Detail hook to mount on exhaust systems or on underside to make retainer for selfmade exhaust systems or for repair of defective retainer hooks usable in tandem with rubber exhaust retainer (Art.No.: 38)
6,73 €inclusive VAT, plus shipping costs Art.No. 6463

pipe clamp D=48,5mm

Detail

universal-clamp for exhaust pipe D=48mm

made of 2mm steel strip
zinc-coated
width: 25mm

- 2 pieces will be needed for Wartburg 353 (two stroke)
(Pre-silencer - connection pipe - Exhaust aftermuffler)
- 2 pieces will be needed for Barkas B1000 (two stroke)
(Pre-silencer - connection pipe - Exhaust aftermuffler)
- 1 piece will be needed for Trabant
(Tuning pre-silencer - Tuning connection pipe )

4,76 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6345

Clamp D=48mm

Detail

universal-clamp for exhaust pipe D=48mm

- 2 pieces will be needed for Wartburg 353 (two stroke)
(Pre-silencer - connection pipe - Exhaust aftermuffler)
- 2 pieces will be needed for Barkas B1000 (two stroke)
(Pre-silencer - connection pipe - Exhaust aftermuffler)
- 1 piece will be needed for Trabant
(Tuning pre-silencer - Tuning connection pipe )

2,45 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4005

Brass cover for exhaust, chromium-plate

Detail

Universal cover for exhaust, chromium-plate 48 x 120 mm,
round-convoluted-transversal cuted
fit to pipe diameter 24 - 48 mm

19,24 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6302

Brass cover for exhaust, chromium-plate, angular

Detail

Universal brass cover for exhaust, chromium-plate 70 x 57 x 145 mm,
angular-transversal cuted
fit to pipe diameter 30 - 50 mm
for all Trabant

14,99 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6301

Pipe clamp D=48,5mm stainless steel

Detail

Exhaust clamp made of stainless steel as ideal addition to the stainless connection pipe Wartburg 353 (LDM-part.no.: 6832)
Pipe - diameter at the expanded end: 48 mm
Mounting place:

1x connetion: main silencer - connection pipe
1x connection: connection pipe - exhaust aftermuffler

material: stainless steel, VA
widness: 25mm
total tow pieces will be needed

20,82 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8273

The complete offer in Exhaust system

* All prices inclusive VAT and plus shipping costs.