This site in german: Trabant 1.1 > Ersatzteile > Motor > Zylinderkopf 
You are here: > Trabant 1.1> Spare parts> Engine> cylinder head

cylinder head

The product category Trabant 1.1 > Spare parts > Engine > cylinder head is spread over 3 sites:

Valve chocks (1 pair)

Valve chock is fit to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.

One pair of these valve chocks is fit to one valve with three grooves.
For one 4-cylinder-engine of Trabant or Wartburg will be needed 16 pieces.
2,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6854

Pin bolt for suction pipe

Connection between cylinder head and suction pipe.,
  • delivery as single part
  • dimension: M8 x 42mm
  • threat lenght 1: about 16mm
  • threat lenght 2: about 19mm
  • High quality made in Germany
  • fit for Trabant 1,1 all types, Wartburg 1,3 all types and Barkas B1000-1
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7667

Pin bolt for exhaust maifold

1,59 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7668

Sealing for suction pipe, Elring

Spezail seal made of steel. Mounting between suction pipe and engine block.
This sealing is made of one piece for all four cylinders.
Fir for the Trabant 1,1 engine with 1100cccm and for Wartburg / Barkas B1000-1 engines with 1300ccm.
  • Manufacturer: ELRING
  • fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1
  • one piece will be needed
8,03 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 758

Suction pipe

Intake manifold with water cooling ports for the Trabant 1,1 and Wartburg 1,3 with carburettor engines. delivery without any mounting parts, seals ec.
  • Suction for all cylinders 1 in 4
  • material: aluminium
  • made in Germany
  • one piece will be needed
95,01 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 759

Crankshaft gear

Crankshaft gear for toothed belt. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • made in Germany
  • number of theeth: 44
  • one piece will be needed
72,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7262

Bolt for crankshaft gear

High grade special bolt for the mounting of the crankshaft gear for toothed belt. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • one piece will be needed
  • made in Germany
5,41 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7482

Bolt for V-pully crankschaft

Bolt with hexagon socket for the mounting of the V-pully at the crankshaft gear for toothed belt.
Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • four pieces will be needed
  • made in Germany
2,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7484

Camshaft timing gear

Timing gear for toothed belt camshaft. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • made in Germany
  • number of theeth: 44
  • one piece will be needed
52,22 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7261

Exhaust manifold seal

Simple construction of the manifold seal. Material graphite texture paper.
Splitted seal (that is one exhaust manifold seal for two cylinder)
  • sealing between outlet side of the cylinder head and the exhaust manifold
  • fit to Trabant 1.1, Wartburg 1.3 und B1000-1 - bouth of this motors have got an cross streem cylinder head
  • scope of delivery one paar (2 pieces)
reduced from 5,64 € to 4,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 31

Exhaust manifold seal with meatl ring

Better construction of the manifold seal. Material graphite texture paper with metal pressing ring for each cylinder.
Splitted seal (that is one exhaust manifold seal for two cylinder)
  • made in Germany by Elring
  • sealing between outlet side of the cylinder head and the exhaust manifold
  • fit to Trabant 1.1, Wartburg 1.3 and Barkas B1000-1- all of this motors have got an cross streem cylinder head
  • scope of delivery one paar (2 pieces)
Special offer normaly 18,77 € now 16,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6260

Sealing for suction pipe, Reinz

Spezail seal made of steel. Mounting between suction pipe and engine block.
This sealing is made of one piece for all four cylinders.
Fir for the Trabant 1,1 engine with 1100cccm and for Wartburg / Barkas B1000-1 engines with 1300ccm.
  • Manufacturer: Reinz
  • fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1
  • one piece will be needed
3,24 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8328
The product category Trabant 1.1 > Spare parts > Engine > cylinder head is spread over 3 sites:
123
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas