This site in german: Barkas B 1000 > Ersatzteile > Elektrik 
You are here: > Barkas B 1000> Spare parts> Electrical system

spareparts for the car electrical system

Category spareparts for the car electrical system has the subcategory

The complete offer in spareparts for the car electrical system

Regulator and cutout relay for AC 12V Dynamo

The voltage regulator is direct mounted at the dynamo. Fit to many IFA dynamos with rotary current. for example:

  • original spare part
  • one piece will be needed
DLR TGL33604
47,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 775

Dynamo without regulator, rotary current AC 12V

Rotary current generator complete overhauled spare part.
Fit to Wartburg 353 and Barkas B1000.
  • Scope of delivery without 12V voltage regulator

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
190,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7361

Dynamo inclusive regulator, rotary current AC 12V

Rotary current generator complete overhauled spare part.
Fit to Wartburg 353 and Barkas B1000.
  • Scope of delivery inclusive mounted voltage regulator


For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
208,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3150
1+1

Dynamo AC 12V, four stroke

Rotary current generator complete in germany overhauled spare part.
Fit to Trabant 1,1 and Wartburg 1,3 and Barkas B1000-1 with four stroke engine.
Scope of delivery inclusive voltage regulator.

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
218,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 762

V-belt AVX 10 x 700

Alternator belt fit to Wartburg 1,3, Trabant 1,1 and Barkas B1000-1.
  • dimensions: 10mm wide, 700mm long
  • made in England
7,61 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1106

Magnet, complete for starter 12V

Magnet switch for the starter motor of the Barkas B1000 und Wartburg 353.
1x threat connection M8 for ring terminal, battery positive terminal.
1x connection for switch wire, blade terminal 6,8mm (standard)
  • voltage 12V
  • spare part is made in EU
  • one piece will be needed
39,79 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6066

Freewheel for starter 12V (W353/B1000)

Starter freewheel complete premounted inclusive pinion (9 teeth).
Fit to Wartburg 353 and Barkas B1000 (2-stroke).
This part is made in Europe. High quality, best replacement for the genuine spare part.
  • one piece will be needed
Original spare part number: 820.11-230
25,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7643

Starter 12V, complete (W353/B1000)

Starter inclusive magnet for starter fit to Wartburg 353 and Barkas B1000 (2-stroke).
Spare part is overhauled in Germany. High quality. Exchange part!
  • voltage: 12V
  • output: 0,58KW
  • pinion teeth: 9

Overhaul part, please send the clutch and clutch disc in advance to our company
Overhaul part, please send the clutch and clutch disc in advance to our company
218,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3155
1+1

Direction indicator switch ( steering column )

switch unit, mounted at the steering column left hand
length of lever: 13,5 cm

functions:
  • switch for direction indicator
  • button for horn
  • button for headlamp flasher
  • switch for switching between low beam and high beam lights

fit to follow vehicles:
  • Trabant 601
  • Wartburg 353
  • Barkas B1000

  • complete unit
  • made in EU
  • one piece will be needed
20,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 71

Direction indicator switch, original ( steering column )

switch unit, mounted at the steering column left hand
length of lever: 13,5 cm

functions:
  • switch for direction indicator
  • button for horn
  • button for headlamp flasher
  • switch for switching between low beam and high beam lights

fit to follow vehicles:
  • Trabant 601
  • Wartburg 353
  • Barkas B1000

  • complete unit
  • original spare part
  • one piece will be needed
original spare part no: 8600.37/7
32,20 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8181

rotary switch for wiper motor W353 / B1000

switch for wiper motor with terminal for water pump
  • fit to Wartburg 353 and B1000
  • fit to 6V and 12V voltage
  • boss included
  • two switching positions
  • without timer switch position
  • one piece will be needed
7,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6576

Signal horn 6V

Universal signal horn for the supply voltage 6V.
Also for any type of vehicle with voltage of 6V.
Best use for Old-and Youngtimers.
  • metal-body, galvaniced / chrome
  • outside diameter: 98mm
  • inclusive grounding clip
  • one piece will be needed
19,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7618

Signal horn, 12V

universal signal horn for the supply voltage 12V.
Also for any type of vehicle with voltage of 12V (like Audi, VW, Opel, Ford and more).
  • galvaniced metal-body
  • inclusive grounding clip
  • made in Germany
  • one piece will be needed
14,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1205

Relais 12V 50A (changeover contact)

Additional relais for operating supply 12V DC with changeover contact. The maximum current 30 ampere.
  • 5 x blade terminal connection pins (6 x 0,8mm
  • 1x changeover contact (can be used as changeover-, make- or break contact
  • Max. continuous current with 12V DC: 40A (make contact no.87)/ 30A (break contact no.87a)
  • plastic case
  • dimensions: 28 x 28 x 25 mm (without mounting lug)
8,92 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6890

Lamp spare kit H4 / 12V

Spare kit with different bulbs fit to voltage of 12V
content:
  • 1x H4-lamp 60/55W with base P43t
  • 2x spherical lamps 21W white with base Ba15s
  • 1x tubular lamp 21W (C21W) with base SV 8,5
  • 1x tubular lamp 5W (C5W) with base SV 8,5
  • 1x bulb 4W (T4W) with base BA 9s
  • 1x bulb for speedometer 2W with base BA 7s
  • 1x Torpedo-fuse 8A
  • 1x Torpedo-fuse 16A
12,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7057

Bulbs spare kit R2 / 6V

Spare kit with different bulbs fit to voltage of 12V
content:
  • 1x R2-lamp 45/40W with base P45t
  • 1x spherical lamps 18W white with base Ba15s
  • 1x tubular lamp 18W (C21W) with base SV 8,5
  • 1x tubular lamp 5W (C5W) with base SV 8,5
  • 1x bulb 4W (T4W) with base BA 9s
  • 1x bulb for speedometer 0,6W with base BA 7s
  • 1x spherical lamps 21W white with base Ba15s
  • 1x spherical lamps 5W white with base Ba15s
  • 1x Torpedo-fuse 8A
  • 1x Torpedo-fuse 16A
14,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7145

Lamp spare kit R2 / 12V

Spare kit with different bulbs fit to voltage of 12V
content:
  • 1x R2-lamp 45/40W with base P45t
  • 2x spherical lamps 21W white with base Ba15s
  • 1x tubular lamp 21W (C21W) with base SV 8,5
  • 1x tubular lamp 5W (C5W) with base SV 8,5
  • 1x bulb 4W (T4W) with base BA 9s
  • 1x bulb for speedometer 2W with base BA 7s
  • 1x Torpedo-fuse 8A
  • 1x Torpedo-fuse 16A
14,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6623

Ignition look

original and brand new ignition switch and look with keys for the Barkas B1000 and B1000-1 with steering look.
  • original spare part
  • one piece will be needed
95,00 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7258

Main switch for car batterie

main switch for car batterie of Barkas B1000
with removable triggering key made from red plastic
  • two bolts M10 for wire connection
  • diameter of mounting holes: 6,4 mm
  • distance between mounting holes (centre-centre): 45mm

for save disconectedness of car batterie from mains (positive or negatve pole)
transferable power (switching capacity):
  • 6V: 600W (100A)
  • 12V: 1000W (ca. 80A)
  • 24V: 1000W (ca. 40A)
32,44 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6568

Speedometer with trip meter

Round speedometer for the cars Wartburg 1.3, Wartburg 353, Trabant 1.1, Barkas B1000 and B100-1.
type:
  • Speedscale up to 150km/h
  • inclusive trip meter
  • power 12V
  • delivery without bulbs and without bulb retainer
  • front rim : black
  • mounting diameter: 100mm
  • genuine spare part
  • Zak No: 3.0230/47
81,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7092

Combi-instrument

Round instrument for the cars Wartburg 1,3 and B1000-1.
Original spare part for display the engine temperature and the fuel gauge.
type:
  • late type with LED
  • inclusive connection plug
  • power 12V
  • scope of delivery inclusive without bulbs
  • front rim : black
  • mounting diameter: 100mm
  • genuine spare part
  • Zak No: 3.085101/47
35,90 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7354

Magnet, complete for starter 6V

Magnet switch for all starter types:
Trabant 500,600,601, Wartburg 311,312,313 and Barkas B1000 with 6V system.
This is an NOS spare part.
Original spare part number: 8201.6/3-400/1
45,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 780

Ignition look ( old type )

Fit to Trabant 500, 600 and 601 old type (6V) and Barkas B1000 (with ignition look inside dashboard).
key switch for ignition and starter with four terminals:
  • 30 - permanent batterie power
  • 15 - ignition power supply
  • 54 - starter
  • P - special parking position of key (for car radio)
26,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 827

Protection cap for starter lite ( plastic )

Sealing cap to protect the starter wire (plus) against dust and moisture.
Fit to the vehicles: P70, Trabant, Wartburg, Multicar, Framo and Barkas.
  • made in Germany
  • one piece will be needed
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 786

Roller bearing 6003 ZZ

Single row roller bearing 6003, ZZ, 17x35x10.
Made by FAG.
Fit to AC generator 12V Trabant, Wartburg und Barkasrotor shaft front side
  • ZZ- synonym for bearing cover, both side
  • bearing play CN(CO)-normale bearing play
  • one piece will be needed
  • made by FAG
8,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6330

Fuse 8A

white fuse for current up to 8A

fit to all vehicles with this type of fuse
0,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1220

Fuse 16A

red fuse for current up to 16A

fit to all vehicles with this type of fuse
0,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1221

Rocker switch rear window defroster

Angular single step switch with function light for mounting for example at the dashboards.
Colour of the switch: yellow
symbol: window defroster
Can be used for 6,12 and 24V electrical systems.
Space saving frame size, best use for additional electrical units at Old- and Youngtimers.
Delivery without bulbs, it will be for example glas base bulb 12V 1,2W one needed.
original spare part number: 8620.19/112
9,88 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7627

Single grade pull switch

Small pull switch for mounting for example at the dashboards.
Can be used for 6,12 and 24V electrical systems.
Space saving frame size, best use for additional electrical units at Old- and Youngtimers.
original spare part number: 8600.23
3,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7589

Key switch

One grade switch made of Duro-plastic
Can be used for 6,12 (120W) and 24V (150W) electrical systems.
Best use for additional electrical units at Old- and Youngtimers.
original spare part number: 8600.21/1
1,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7590

Fuse set

Torpedo-fuse kit ideal for traveles or for the daily use.
Delivery with resealable blister box.
Scope of delivery:
  • 4x 8A (withe)
  • 4x 16A (red)
  • 2x 25A (blue)
2,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6437

Brush for Dynamo AC

Spare brush fit to AC Dynamo 12V Trabant 1.1, Wartburg 1.3 and Barkas B1000-1
  • original spare part (NOS)
  • price for each one
  • two pieces will be needed

size:15,5mm x 10mm x 5mm
wire: 40mm
flat plug 6,3mm
original spare part number: 8042.1-041
5,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7598

Brush for Dynamo AC

Spare brush fit to AC Dynamo 12V Trabant 601 and dynamo 12V Wartburg 353 and Barkas B1000
  • original spare part
  • price for each one
  • two pieces will be needed

size: 15,5mm x 10mm x 5mm
wire: 30mm
original spare part number: 8042. 1-041/1
5,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 770

Diode base plate for Dynamo AC

Spare base plate complete pre installed with excitation diodes and plus diodes.
Best use for exchanging the complete componet.
Delivery without mounting parts.
Fit to dynamo 12V Wartburg 353 and Barkas B1000 and dynamo 12V Wartburg 1.3, Trabant 1.1 and Barkas B1000-1.
  • original spare part
  • one base plate will be needed
original spare part number: 8042.4-410/1
28,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7602

Pessure spring carbon brush

Coil spring for the carbon brushes at the rotary current generator.
Original spare part (NOS)
For each generator two pieces will be needed.
Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-040
1,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 760

Bearing cover rotary current generator

Metal cover for the rear ball bearing (rotor shaft rear 6303ZZ) of the rotary current generator to the collector ring.
Original spare part (NOS)
  • metal, galvaniced
  • For each generator one piece will be needed
  • Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-030
1,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 772

Bolt for regulator

Mounting bolt for regulator and cutout relay.
Original spare part (NOS)
  • threed: M5
  • length: 49mm
  • delivery inclusive nut SW8
  • For each generator tow pieces will be needed
  • Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.401-000
2,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7600

Graphite collector ring rotary current generator

Collector ring for the generator rotor.
Inclusive metal plates for mounting the rotor windings
Original spare part (NOS)
  • For each generator one piece will be needed
  • Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-032/1
96,18 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7599

Rubber membrane plug for holes with diameter of 15mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 15 mm
inner diameter of membrane (max. usable diameter): 9 mm
outer diameter (total): 20 mm
0,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6796

Rubber membrane plug for holes with diameter of 18,5mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 18,5 mm (0,728")
inner diameter of membrane (max. usable diameter): 11 mm (0,433")
outer diameter (total): 23 mm (0,906")
0,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6895

Rubber membrane plug for holes with diameter of 28mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 28 mm
inner diameter of membrane (max. usable diameter): 21 mm
outer diameter (total): 35 mm
1,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6798

Rubber membrane plug for holes with diameter of 32mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
  • fit to hole diameter of 32 mm
  • inner diameter of membrane (max. usable diameter): 25 mm
  • outer diameter (total): 39 mm
  • thicknes of the menbrane: 1mm
  • total thickness: 9mm
2,23 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7613

Rubber membrane plug for holes with diameter of 47mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
  • fit to hole diameter of 47 mm
  • inner diameter of membrane (max. usable diameter): 36 mm
  • outer diameter (total): 54 mm
  • thicknes of the menbrane: 1mm
  • total thickness: 10mm
2,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6800
1+1

Rubber membrane plug for holes with diameter of 25mm

Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 25 mm
inner diameter of membrane (max. usable diameter): 18,5 mm
outer diameter (total): 30,5 mm
thickness: 7 mm
1,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7625

Rubber membrane plug for holes with diameter of 20,5mm

Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 20,5 mm
inner diameter of membrane (max. usable diameter): 13,5 mm
outer diameter (total): 25 mm
thickness: 7 mm
1,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6797

Rubber membrane plug for holes with diameter of 37mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 37 mm
inner diameter of membrane (max. usable diameter): 29 mm
outer diameter (total): 44 mm
1,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6799

Auxiliary diode base plate for Dynamo AC

Spare base plate pre installed with excitation diodes.
Best use for exchanging the single complete componet.
Delivery without mounting parts.
Fit to dynamo 12V Trabant 601
Trabant 1,1 and Wartburg 1,3 as well Barkas B1000-1
  • original spare part
  • one base plate will be needed
original spare part number: 8042.4-412/2
9,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7622

Isolating plate for auxiliary diode base plate

Spare plasic isolating plate for the base plate (excitation diodes) for Dynamo AC
Delivery without mounting parts.
Fit to dynamo 12V Trabant 601
Trabant 1,1 and Wartburg 1,3 as well Barkas B1000-1
  • original spare part
  • one isolating plate will be needed
original spare part number: 8042.4-412/2:2/1
3,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7662

Diode base plate for Dynamo AC

Spare base plate complete pre installed with excitation diodes and plus diodes.
Best use for exchanging the complete componet.
Delivery without mounting parts.
Fit to dynamo 12V Trabant 601
Trabant 1,1 and Wartburg 1,3 as well Barkas B1000-1
  • original spare part
  • one base plate will be needed
original spare part number: 8042.4-410
49,44 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7601

Brush for starter

Spare-brushes of the starter engine to solder on at the coil set.
Can be used for all kind of starters 6V and 12V left- and right turning (without Trabant 1.1, Wartburg 1.3 and Baraks B1000-1)
mounting place: brushholder bas plate
  • size: 16X19x7
  • delivery as an single part
  • for each starter two pieces will needed
original spare part number: 8202.11-220:10
3,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 785

Bolt for starter

Bolt of the Bearing case of the starter engine.
Connection bolt will be mounted at the beraing case threadholes and on the other side it will hold the rear case cover.
Delivery as a single part without nuts an washers.
Can be used for all kind of starters 6V and 12V left- and right turning (without Trabant 1.1, Wartburg 1.3 and Barkas B1000-1)
  • original spare part
  • surface: galvaniced
  • total length: 16.5 cm
  • delivery as an single part
  • for each starter two pieces will needed
original spare part number: 8202.1-000:4/1
2,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7658

Spring for brush starter

Pressure spring for the brushes of the starter engine.
This spring will push the brush at the collector ring from the rotor shaft.
Can be used for all kind of starters 6V and 12V left- and right turning (without Trabant 1.1, Wartburg 1.3 and Barkas B1000-1)
mounting place: brushholder bas plate
  • original spare part
  • delivery as an single part
  • for each starter two pieces will needed
original spare part number: 8202.11-220.6
1,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7629

switch unit for ignition look switch

Switch insert for ignition look.
Electrical part of ignition look switch wich is mounted at the backside.
Latest version with six blad terminals.
Best quality form the original manufacture made in Germany.
Fit to Wartburg 353, 1.3, Barkas B1000 and B1000-1
original spaer part number: 8630.10
19,72 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7719

Lense for Interior light Barkas

Glass for both types of the Interior lamp.
Useabe for 6V and 12V electrical systems.
Fit to Barkas B1000 and B1000-1.
Original spare part.
Delivery as an single part.
original spaer part number: 8838.7-2
5,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7755

Interior light Barkas 2x5W

Interior lamp for mounting of two tubular bulb 5W.
Useabe for 6V and 12V electrical systems.
Fit to Barkas B1000 and B1000-1.
Original spare part.
Delivery without bulbs.
original spaer part number: 8838.7/1
12,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7754

Interior light for Barkas 1x5W

Interior lamp for mounting of one tubular bulb 5W.
Useabe for 6V and 12V electrical systems.
Fit to Barkas B1000 and B1000-1.
Original spare part.
Delivery without bulbs.
original spaer part number: 8838.7
12,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7753

LED Headlamp insert

LED Headlight as an complete unit.
Best replacement for the H4 or R2 headlights. Brilliant light quality !!!
Fit to Trabant, Trabant 1.1, Baraks B1000, Barkas B1000-1, W50, Multicar, MZ motorbikes.
  • scope of delivery: inclusice LEDs
  • price per piece
  • electrical power: 12V
542,01 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8132

Roller bearing 6203 ZZ

Single row roller bearing 6203, ZZ, 17x40x12.
High Qualit made by FAG.
Fit to Dynamo 12V with cut out relay (electronic) for Wartburg 353 and Barkas B1000, LDM-part.no.:3150 and Dynamo 12V with cut out relay for Wartburg 353 und Barkas B1000, LDM-Art.Nr.:7361 rotor shaft front side (end shield)
  • ZZ- synonym for bearing cover, both side
  • dimensions: d=17mm, D=40mm, widness:12mm
  • bearing play CN(CO)-normale bearing play
  • one piece will be needed
  • made by FAG
9,79 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8256

Roller bearing 6303 ZZ

Single row roller bearing 6303, ZZ, 17x47x14.
High Qualit made by FAG.
Fit to AC generator 12V Trabant, LDM-part-no.: 760 and AC generator 12V Trabant 1.1, Wartburg 1,3 and Barkas B1000-1 LDM-part-no.: 762 rotor shaft front side (end shild)
  • ZZ- synonym for bearing cover, both side
  • dimensions: d=17mm, D=47mm, widness=14mm
  • bearing play CN(CO)-normale bearing play
  • one piece will be needed
  • made by FAG
9,79 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6333

Wiper motor 12V

Wiper motor as universal unit with 12V sytem. This Repro part can be used for the car types: Multicar M22, M24, M25, Wartburg 353 and 1,3, Baraks B1000 and B1000-1, Trabant 601 (from vintage 88) and Trabant 1,1.
Inexpensive option to the original spare part.
The base plate can be turend to modificate the wiper motor for your car type.
The wire connection have to be done byself.
  • delivery as an single part
  • without wires or wire plugs
  • one piece will be needed
  • 12V system
55,69 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8357

Carrier for carbon brush

Retainer for the carbon brushes at the rotary current generator.
New produced spare part.
For each generator one piece will be needed.
Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1, Multicar M25
17,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8495

Switch and timing switch for wiper motor

Combination switch with 2 level timing,2 level of wiper speeds and button for screen water.
Switch for wiper motor 12V.
Delivery inklusive knob for Trabant-Types. The switch can be modificatet with the knob for Wartburg, Barkas, Multicar ec.
  • New produced spare part
  • one piece will be needed
38,08 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1117
The complete offer in spareparts for the car electrical system

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas