front brake

The complete offer in front brake

Brake hoses and holder front axle

Brake hose, front outside

Flexible brake hose for the Barkas B1000 and B1000-1 drum brake frot axle.
Reproducion of this brake hose, made at an current production in best quality.

total length: 49 cm
tap: 1x M12 x 1,5 core thread and 1x M12 x 1,5 male thread
two pieces will be needed

15,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4220

Inner brake hose, front

Detail

Felible brake hose for the Barkas front brake system inner side.
Reproducion of this brake hose, made at an current production in best quality.

length total: 28,5 cm
length between thread connectors: 26cm
thread connection: both ends M12x1 innside
two pieces will be needed

13,74 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4221

retainer for brake hose

Detail

Brake hose retainer for Barkas

to put into the circumferential slot of the brake hose fitting
fit or all types of B1000
for one vehicle you need 10 pieces
slot wide: 14 mm
thickness: 1,75 mm

5,97 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6534

Spring for brake / clutch pedal

Detail

Release spring for the pedal system at the Barkas B1000 and B1000-1.
Will be mounted on one hand at the brake pedal and on the other side at the car body.
The spring supports the pedal reset of the brake or the clutch pedal.

material: steel
surface: galvaniced
for each car two pieces will be needed
delivery as an single part
best replacement and high quality, made in Germany

4,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8232

Brake drum ( single part )

Detail

Drum for the wheel brake system of the vehicles B1000 and Barkas B1000-1 without latest serial of the 4-Takt Barkas with disc brake.
Fit to both types of brake master cylinders single- and two circle.
The brake drum can be mounted at the front and the rear axle.

bolt circle 5x140mm
for each car four pieces will be needed
made in EU

89,96 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4200

Countersunk-head screw for brake drum Detail M8 x 16 mm with hexagon socket galvanized Two pieces for each wheel side, used for front and rear axle
0,55 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6281

Brake shoe, complete, with lining ( front ) Detail
35,50 €inclusive VAT, plus shipping costs temporary not available Art.No. 4201

Brake shoe set front axle for Barkas

Detail

One kit of brake shoes fit to the front brake system of Barkas B1000 and B1000-1.
Set consitst of:

4 pieces of brake shoes
one set will be needed
made in EU

98,90 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 8094

release spring for brake shoes, long

Detail

long version of release spring for break shoes
fit to follow brake systems:

brake drum front axle Wartburg 353 (two pieces for each wheel side)
brake drum rear axle W353 (one piece for each wheel side)
brake drum front axle B1000 (two pieces for each wheel side)
brake drum rear axle B1000 (one piece for each wheel side)
trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9): one piece for each wheel side

3,18 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6454

Pressure spring for brake shoes

Detail

Spring to fix the break shoes at the brake base plate.
fit to follow brake systems:

4 pieces for brake drum front axle Wartburg 353
4 pieces for brake drum rear axle W353 and 1.3
4 pieces for brake drum front axle B1000 and B1000-1
4 pieces for brake drum rear axle B1000, B1000-1
2 pieces for trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9)
delivery as an single part
made in Germany

2,83 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8195

left thrust rod for brake shoes

Detail

thrust rod fit to the left side of rear wheel brake

fit to follow brake systems:

left brake drum rear axle Wartburg 353 with brake shoe wide of 50mm (one piece)
left brake drum front axle B1000 (one piece)
left brake drum rear axle Multicar M22 (one piece)

24,31 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6472

rigth thrust rod for brake shoes

Detail

thrust rod fit to the right side of rear wheel brake

fit to follow brake systems:

rigth brake drum rear axle Wartburg 353 with brake shoe wide of 50mm (one piece)
right brake drum front axle B1000 (one piece)
rigth brake drum rear axle Multicar M22 (one piece)

24,31 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6471

Eccentric bolt for front brake shoe Detail Eccentric bolt for front brake shoes of the Barkas B1000 and B1000-1. The part will be placed thrue the brake leaver for hand brake cable. Two pieces will be needed
12,80 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 4203

Mounting kit eccentric bolt for front brake shoe

Detail

This set can be used to fix the eccentric bolt at the front brake shoe of the Barkas B1000 and B1000-1.
Scope of delivery:

1x grooved pin
1x mounting nut
1x spring washer
1x washer
1x snap ring
one kit for each wheel side

3,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7524

Wheel brake cylinder original and reproduction

Wheel brake cylinder, front left hand

Detail

Brake cylinder for the front axle oft the Barkas B1000, B1000-1 and Multicar M24.
mounting place: front left hand

For each car two pieces will be needed
New production made in EU
no exchange part

39,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 4205

Wheel brake cylinder, front left hand, original

Detail

Complete in Germany overhauled front wheel brake cylinder with ring sleeves and brak-piston.
Mark: RENAK LZ 5
Exchange part !

for each wheel side two pieces will be needed
scope of delivery inclusive sleeves
without bleeder screw
without adjuster
piston diameter: 31,8 mm
fit toBarkas B1000, B1000-1 and Multicar M24

Please note, we can only exchange you this spare part if you ship 1x wheel brake cylinder with the mark Renak RENAK LZ 5 to our company in advance!

Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.

85,92 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7172

Wheel brake cylinder, front right hand

Detail

Brake cylinder for the front axle oft the Barkas B1000, B1000-1 and Multicar M24.
mounting place: front right hand

For each car two pieces will be needed
New production made in EU
no exchange part

39,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 4206

Wheel brake cylinder, front right hand, original

Detail

Complete in Germany overhauled front wheel brake cylinder with ring sleeves and brak-piston.
Mark: RENAK LZ 5
Exchange part !

for each wheel side two pieces will be needed
scope of delivery inclusive sleeves
without bleeder screw
without adjuster
piston diameter: 31,8 mm
fit for Barkas B1000, B1000-1 and Multicar M24

Please note, we can only exchange you this spare part if you ship 1x wheel brake cylinder with the mark Renak RENAK LZ 5 to our company in advance!

For more informations to this exchange part please use the Detail button.

85,92 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7173

Ring sleeve, for wheel brake cylinder, front, original Detail Sleeve for front wheel brake cylinder of the Barkas B1000 and B1000-1 and Multicar M24. Best quality made in Germany. The set included 2 pieces. The ring sleeve should only be changed, if inner surface of cylinder is okay. Otherwise the complete wheel brake cylinder should be changed.
15,64 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7325

Hexagon bolt for wheel brake cylinder, front axle

Detail

Mounting bolt for the fornt wheel brake cylinder of the Barkas B1000 and B1000-1

delivery complete with spring washer
surface: galvaniced
for the front axle 8 pieces will be needed

0,25 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6282

Ring sleeve, for wheel brake cylinder, complete front ( incl. 2 pieces ) Detail Ring sleeves with moderate quality. made in Europe
9,47 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 4208

Bleeder screw, M12x1

Detail

Bleeder screw for many IFA vehicles. Tap M12 x 1 with selaing cone 90 degrees.
Fit to:

Barkas B1000
Barkas B1000-1
Multicar M22
Multicar M24
Multicar M25
Wartburg 311 and 313

4,74 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6121

Bleeder screw cap

Detail

fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.

material: rubber
made in Germany

0,65 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 215

connection brake line

Detail

brake line to connect both wheel brake cylinders inside of brake drum of front axle Barkas B1000
usable for each side (rigth/left)

Delivery as one piece NiCU material with mounted connection nuts
made in Germany
two pieces will be needed

9,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6456

Bowden cable for the hand brake

Brake cable, short, complete

Detail

Connection brake cable between the hand brake lever and the beam (in balance).
Can be used for models with hand brake lever between the front seats.
total length: 880mm
lenght of the bowden cable: 520mm

49,81 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4230

Brake cable, long, left hand, complete (new version)

Detail

Brake wire fit for left front wheel of the Barkas B1000 and B1000-1.
(Driver side)
For latest version of hand brake system with hand brake lever mounted next to the driver seat.

length total: 160 cm
length of bowden sheathing: 116 cm

83,78 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4231

Brake cable, long, right hand, complete (new version)

Detail

Brake wire fit for right front wheel of the Barkas B1000 and B1000-1.
(Co-driver side)
for latest version of hand brake system with hand brake lever mounted next to the driver seat.

length total: 160 cm
length of bowden sheathing: 116 cm

83,78 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 4232

Brake cable, short, complete (old version)

Detail

connection cable for hand brake lever of BARKAS

only fit to old version of hand brake system with hand brake lever mounted in dashboard

56,52 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6660

Brake cable, long, left hand, complete (old version)

Detail

Brake wire fit for left front wheel of the Barkas B1000.
(Driver side)

only fit to old version of hand brake system with hand brake lever mounted in dashboard
length total: 110 cm
length of bowden sheathing: 79,5 cm

73,87 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6657

Brake cable, long, left hand, complete (old version)

Detail

Brake wire fit for right front wheel of the Barkas B1000.
(Co-driver side)
For the old version of hand brake system with hand brake lever mounted in dashboard

ength total: 110 cm
length of bowden sheathing: 79,5 cm

73,87 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6658

Adjusting nut for brake cable, long

Detail

Spezial nut with snap postions for adjusting the play of the brake cables.
It fit to front wheel hand brake system of the BARKAS B1000 and B1000-1

new original spare part
fit to the old and the later brake system
for the new hand brake system 3 pieces will be needed
for the old hand brake system 2 pieces will be needed

9,87 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7259

Brake-cleaner XXL 850ml

Detail

quick-cleaner for brake and clutch parts

FCKW, aceton free
volume: 850 ml
delivery as an single spray

price 5,29 Euro / liter

4,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7898

brake-cleaner 600ml

Detail

quick-cleaner for brake and clutch parts

FCKW free
volume: 600 ml
type: AD
delivery as an single spray

price 7,62 Euro / liter

4,57 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6252

Brake pipe spanner 12-13mm, straight Detail Special tool for mounting or demounting of screw-cap for brakelines. type: sraight Fit to brake screws SW12 and SW13.
12,43 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7992

Brake pipe spanner 10-11mm, straight Detail Special tool for mounting or demounting of screw-cap for brakelines. type: sraight Fit to brake screws SW10 and SW11.
9,86 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7703

Brake pipe spanner 10-11mm angled Detail Special tool for mounting or demounting of screw-cap for brakelines. type: level angleded Fit to brake screws SW10 and SW11.
12,47 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7702

Brake-cleaner, one packing unit, 12x Sprayer 600ml

Detail

Complete packing unit quick-cleaner for brake and clutch parts

FCKW free
content: 12x sprayer with volume of 600 ml

That implies a price of a single sprayer of 3,90 €price 6,50 Euro / liter

46,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7033

Universal brake line, CUNIFER 5m, 6mm Detail Brakepipeline 6 x 0,7 mm made of NiCuFe length: 5m for B1000, B1000-1, Mulicar M22, M24, M26, Framo, Warburg 311 and 313
price for each meter: 8,60 €/m	42,99 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7398

Wheel bolt M14 x 1,5 for B1000, GDR forklift

Detail

Wheel bolt fit to Barkas B1000 and B1000-1. Fit also to some forklifters, trailers and spacial made vehicles (GDR production).
Please note:
The length of 60mm consist the length of thread and the length of knurling.

length: 41mm
thread: M14 x 1,5
thread length: 29mm
knurling diameter: 16mm
knurling length: 7mm

9,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7494

Screw-cap for brakeline 6 x 0,7

Detail

Screw-cap for brakeline 6mm x 0,7mm. The screws can be mounted at steel or nickel-copper brake lines.
Please count how much pieces zou need total.
Fit to Barkas B1000, Multicar M22, M24, M25 and all vehicles with 6mm brake line.

border: type E
thread: M12x1
material: steel, galvaniced
made in Germany

1,61 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7276

Bleeder screw cap with tongue

Detail

Rubber cap with additional tongue fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.
The flap kibosh loosing the complete cap.

material: brake fluid resistant rubber
made in EU

1,68 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8446

The complete offer in front brake

* All prices inclusive VAT and plus shipping costs.