Home
Impressum
Terms of business
Basket
You are here: >
Barkas B 1000
>
Spare parts
>
Accessories
Shop
IFA engine
pistons
IFA-vehicles
Framo
P70 / F8 / F9
W50/L60
Trabant 500/600
Wartburg 311 / 312 / 313
Multicar M22
Multicar M24
Multicar M25
Multicar M26
Multicar M27
Trabant 601
Spare parts
Tuning parts
complete cars
Trabant 1.1
Spare parts
Tuning parts
Wartburg 353
Spare parts
Tuning parts
Wartburg 1.3
Spare parts
Tuning parts
Barkas B 1000
Spare parts
Exhaust system
Brakes
front brake
master brake cylinder
Electrical system
Lighting
Engine
clutch
ignition
Piston
carburettor & air intake
Cooling system
gearbox
Fuel system
Front axle
rear axle
Panes & rubber sections
Body
Accessories
valve caps
Ball joints, accessories
Boots for ball joints
Skoda
Trailer
Bastei-camper
Camptourist / Klappfix
Intercamp / Oase
Qek-camper
Special made
Bulbs
12Volt
6Volt
24 Volt
connecting wire and accessory
bicolored car wires
Single colour wire
manufactured wires
workshop requirement
hose clips
tools
Lubricants
Mounting parts
fuel tank coating
Protection equipment
Varnish and paint
Accessory
Corrosion protection
adhesive bonded joint
Bowden cable
Carburetor jets
care products
Antifriction bearing
Grooved ball bearing
Cylindrical roller bearing
oils
Special items
Service
privacy policy
Terms of business
Used Oil disposal
Taking back of batterys
Downloads
shipping costs
Favorite links
Impressum
Produktindex
Search
Basket
Accessories
Category Accessories has the subcategory
valve caps
The complete offer in Accessories
Trademark * BARKAS *
Detail
Plastic trade mark with lettering BARKAS for mounting at the B1000 or B1000-1 front door.
Label has 3 casted on mounting pins.
material: plastic
colour: black
length: ca 21,5cm
highness: ca. 3,2cm
delivery without mounting parts
made in EU
15,58 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 4560
Trademark * B 1000 *
Detail
Plastic trade mark with lettering B1000 for mounting at the Barkas front door.
Label has 3 casted on mounting pins.
material: plastic
colour: black
length: ca 17,5cm
highness: ca. 3,2cm
delivery without mounting parts
made in EU
15,58 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 4561
Trademark * IFA *
Detail
Typical plastic trade mark with IFA stamping for mounting at the Barkas front door.
Label has two casted on mounting pins.
material: plastic
colour: black
delivery without mounting parts
made in EU
14,58 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 4562
Splint-pin set, complete with metal box
Detail
Splint-pin set, complete with metal box.Consist of 1150 differnt splint diameters and sizes. Electrogalvanized, DIN 94.
scope of dlivery:
1,6 x 32 (100 pieces)
2 x 22 (100 pieces)
2 x 32 (100 pieces)
2 x 40 (100 pieces)
3,2 x 20 (100 pieces)
3,2 x 32 (100 pieces)
3,2 x 40 (100 pieces)
4 x 32 (100 pieces)
4 x 40 (100 pieces)
4 x 50 (100 pieces)
5 x 40 (50 pieces)
5 x 50 (50 pieces)
72,35 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 1342
Splint-pin set, 555 pices
Detail
Splint-pin set, complete with clear plastic box.
Consist of 555 differnt splint diameters and sizes. Electrogalvanized, DIN 94.
scope of dlivery:
1,6 x 32 (150 pieces)
2,4 x 25 (150 pieces)
2,4 x 38 (100 pieces)
3,2 x 32 (75 pieces)
3,2 x 50 (50 pieces)
4,0 x 64 (30 pieces)
17,03 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7739
Bering for outer rear view mirror
Detail
Mirror in simple quality, inclusive mounting clamp.
material: PVC, black
care side: right / left hand mountable
delivery inclusive plate glass
made in EU
fit to Barkas B1000 and B1000-1 and Multicar M25
24,42 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 4550
Bering for outer rear view mirror, high quality
Detail
Mirror in high quality, inclusive mounting clamp.
material: PVC, black, shock proof with rubber edge
care side: right / left hand mountable
delivery inclusive arched plate glass for the best rear view.
made in Germany
fit to Barkas B1000 and B1000-1 and Multicar M25
39,41 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7100
plate glass for rear-view mirror
Detail
plate glass for the outer rear-view mirrors of Barkas B1000 and Multicar M25
domed mirror glass
height: 240 mm (highest extent)
width: 156 mm (wides extent)
symmetrical outlines (no conical outlines
Please check the dimension of your mirror, because differnt types of mirrors were mounted in the past.
19,63 €
inclusive VAT, plus shipping costs
Art.No. 6627
Holding device for outer rear view mirror, right hand
Detail
14,67 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 4551
Holding device for outer rear view mirror, left hand
Detail
14,67 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 4552
Fuel tank for KA, KB
Detail
104,93 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 4554
Carpets for the Barkas with 2-stroke engine
Carpet front, B1000, Nobless black
Detail
Elaborate made and exactly cuted two piece rubber-carped for the Barkas from vintage 1962-1990.
material: waterproof rubber, colour black
made in Germany
66,64 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8259
Fitted carpet front, B1000, Nobless grey
Detail
Elaborate made and exactly cuted two piece carped for the Barkas from vintage 1962-1990 (two stroke engine)
Colour light grey and grey adge.
material: typ NOBLESS high quality soft velours, with rubber bottom and fringe
made in Germany
74,92 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8570
Fitted carpet front, B1000, Nobless black
Detail
Elaborate made and exactly cuted two piece carped for the Barkas from vintage 1962-1990.
material: typ NOBLESS high quality soft velours, with rubber bottom and fringe
made in Germany
96,30 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6851
Fitted rubber carpet front, B1000
Detail
Elaborate made and exactly cuted two piece rubber-carped for the Barkas from vintage 1962-1990.
material: waterproof rubber, colour black
made in Germany
74,97 €
inclusive VAT, plus shipping costs
Art.No. 7047
Carpets for the Barkas with 4-stroke engine
Fitted carpet front, B1000-1, Nobless black
Detail
Elaborate made and exactly cuted two piece carped for the Barkas B1000-1 with four stroke engine
material: typ NOBLESS high quality soft velours, with rubber bottom and fringe
made in Germany
83,30 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7046
Fitted carpet front, B1000-1, Nobless anthrazit
Detail
Elaborate made and exactly cuted two piece carped for the Barkas B1000-1 with four stroke engine
material: typ NOBLESS high quality soft velours colour anthrazit, with rubber bottom and black fringe
made in Germany
83,30 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7836
Fitted rubber carpet front, B1000-1
Detail
Elaborate made and exactly cuted two piece rubber-carped for the Barkas B1000-1 (four stroke engine)
material: waterproof rubber, colour black
made in Germany
74,97 €
inclusive VAT, plus shipping costs
Art.No. 7048
Fitted carped car boot, Nobless black
Detail
Elaborate made and exactly cuted carped for the Barkas B1000 and Barkas B1000-1 with four stroke engine.
Vintage 1962-1990.
Carpet fit to the vehile model Van.
This carpet can be used for Van types without 3. seat row.
material: typ NOBLESS high quality soft velours, with rubber bottom and fringe
colour: black
made in Germany
78,88 €
inclusive VAT, plus shipping costs
Art.No. 4553
Bulb retainer display instruments
Detail
Holder for bulbs as an checked secound hand part. Can be used for nearly all IFA vehicles.
Type with contact pin for wire plug: 6,3x0,8 (standart)
Useabe for bulbs 6V, 12V oder 12V 2W with Ba7S base as speedometer lightning, display and indecator lights.
delivery without bulb and pin
new Reproduction
4,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7843
Bulb retainer display instruments, screw pin
Detail
Holder for bulbs with screw pin for wire connection. Can be used for nearly all IFA vehicles.
Type with contact for screw connection: up tp 1,5 mmm².
Useabe for bulbs 6V, 12V oder 12V 2W with Ba7S base as speedometer lightning, display and indecator lights.
new spare part
delivery without bulb
6,10 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 7844
Retro back up lamp for rear bumper
Detail
Chromed back up light for the mounting on top of the bumber.
The lamp made of high end fabrication and the design fit brilliant to historical cars.
colour: chromium-plated casing, clear glass
size: 11 x 5,5 cm
delivery without bulb
made in Germany
with E-icon
134,63 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6876
Retro licence plate lights
Detail
Chromed reversing registration plate light.
Mounting with two M6 nuts.
The lamp made of high end fabrication and the design fit brilliant to historical cars.
colour: chromium-plated casing, clear lense
size: L=82mm x B=29mm x H=27mm
bolt distance: 45mm
delivery without bulb
made in Europe
mit E-Zeichen
16,86 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7989
Retro rear fog lamp for rear bumper
Detail
Chromed reversing fog light for the mounting on top of the bumber.
The lamp made of high end fabrication and the design fit brilliant to historical cars.
colour: chromium-plated casing, red glass
size: 11 x 5,5 cm
delivery without bulb
made in Germany
with E-icon
159,88 €
inclusive VAT, plus shipping costs
Art.No. 6877
Replacement glass for RETRO rear fog lamp
Detail
Red glass as spare part for our RETRO fog light
material: red glass
made in Germany
19,99 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 7136
Replacement glass for RETRO reverse lamp
Detail
Red glass as spare part for our RETRO reverse indication lamp
material: clear (white) glass
made in Germany
8,93 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 7137
1+1
Speedometer with trip meter
Detail
Round speedometer for the cars Wartburg 1.3, Wartburg 353, Trabant 1.1, Barkas B1000 and B100-1.
type:
Speedscale up to 150km/h
inclusive trip meter
power 12V
delivery without bulbs and without bulb retainer
front rim : black
mounting diameter: 100mm
genuine spare part
Zak No: 3.0230/47
81,64 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7092
Combi-instrument
Detail
Round instrument for the cars Wartburg 1,3 and B1000-1.
Original spare part for display the engine temperature and the fuel gauge.
type:
late type with LED
inclusive connection plug
power 12V
scope of delivery inclusive without bulbs
front rim : black
mounting diameter: 100mm
genuine spare part
Zak No: 3.085101/47
35,90 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 7354
Rubber cover for ignition key
Detail
Grip rubber for mounting at the ignition key.
This spare part is an original one.
Fit for the vehicles: Trabant, Wartburg, W50, Barkas LO, LD Multicar usw.
material: rubber, black
original spare parts
delivery as an single part
9,50 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8193
Delivery only at advance payment.
Spare key, copy is made from yor key number
Detail
Production of an spare key for door, ignition or fuel cap looks and so on...
You have to tell us your key number per email, fax or letter.
Keys for the vehicles: Trabant, Wartburg, W50, Barkas LO, LD Multicar usw.
delivery time about one to two weeks
all Trabant 601 / Trabant 1,1, Wartburg 353 / Wartburg 1,3 and Brakas B1000/ B100-1 keys possible
Please write here your keynumber in:
Reproduction time for key ca. 2-3 Wochen !!!
nfertigung auf Kundenwunsch, KEINE Rücknahme, Umtausch oder Stornierung / Widerruf nach Zahlungseingang!
29,75 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 1341
Delivery only at advance payment.
Cap for water vessel for windscreen washer system
Detail
Plastic cap with mounting sprap for the water bottle of the windscreen washer system.
The plug close up the refilling hole.
To use at many reservoir bottles with electrical or mechanical pump.
fit to follow washer systems:
Trabant 601, Trabant 1.1, Wartburg 1.3, Wartburg 353, Multicar, W50 and so on
4,75 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7357
Plastic cap for wiper arm
Detail
Sealing cap (single part) for the mounting place of the wiper arm.
Fit to CZ models Trabant, Wartburg and B1000.
Can be used for screw joints spanner gap SW 13.
material: plastic, black
original spare part
two pieces will be needed for models of Limousine
station wagons will need three of this spare part
0,49 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7440
Metal holder for water bottle
Detail
Metal retainer for the windscreen water bottles 1,5 liter of the Trabant, Muticar, B1000 and 2,5 liter of the Wartburg models.
original spare part
material: steel, surface galvaniced
one piece will be needed
original part number: WN 9143
5,61 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7442
Universal boot kit
Detail
Bellows for many exertions at automobiles, trailers, caravans and ships ...
size:
length:19cm diameter:10mm / 30mm
length:23cm diameter: 35mm / 35mm
length:15cm diameter:30mm / 42mm
length:13cm diameter:41mm / 48mm
length:12cm diameter:41mm / 55mm
different length and diameter combinable
length of the bellow pice: 95mm
17,28 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7010
Single jet for windscreen washer, original
Detail
Jet for windscreen cleaning. Can be used for mechanical and electrical wash pump.
Washer jet with only one adjustable jet.
made in Germany
colour: black
original spare part number: 9.0002
4,55 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7444
Windscreen wiper set Barkas, complete
Detail
One kit of wipers and wiper arms for B1000 and B1000-1 (please note: four stroke models only use for types with old wiper linkage without grooved conical stub.
Wiper set consist of:
two piece wiper arm
tow piece wiper blade with rubber
28,84 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 6839
Spring clip for interior lining
Detail
Clip for mounting the door trim panels or the inner wheel covers. Fit to all types of Trabant, Wartburg, Barkas and many IFA vehicles.
material: spring steel, surface, galvaniced
0,99 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 1160
Wiper motor 12V
Detail
Wiper motor as universal unit with 12V sytem. This Repro part can be used for the car types: Multicar M22, M24, M25, Wartburg 353 and 1,3, Baraks B1000 and B1000-1, Trabant 601 (from vintage 88) and Trabant 1,1.
Inexpensive option to the original spare part.
The base plate can be turend to modificate the wiper motor for your car type.
The wire connection have to be done byself.
delivery as an single part
without wires or wire plugs
one piece will be needed
12V system
89,73 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8357
Bulb retainer display instruments, additional negative terminal
Detail
Holder for bulbs as an new reproduction part. Can be used for nearly all IFA vehicles.
Type with two contact pins for wire plug: 6,3x0,8 (standart)
1x pin for plus terminal (+) and 1x pin for negative pin (-)
Useabe for bulbs 6V 2W or 12V 2W with Ba7S base as speedometer lightning, display and indecator lights.
New repoduction
delivery without bulb
made in EU
3,80 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 8443
Outer door handle, left side, PVC black, complete with look and key (EU)
Detail
Reproduction door handle made of plastic for Multicar, Trabant, Wartburg, Barkas, W50.
colour: black
scope of delivery complete with lock and key
good quality made in EU
19,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8631
The complete offer in Accessories
* All prices inclusive VAT and plus
shipping costs
.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas