This site in german: Wälzlager > Rillenkugellager 
You are here: > Antifriction bearing> Grooved ball bearing
Navigation

Grooved ball bearing

The complete offer in Grooved ball bearing

Grooved ball bearing 16013 old version

One row grooved ball bearing 16013, it fit in a gearbox from Trabant 601 up to vintage october 1974 (old differential) for differential side gear (differential case - final drive pinion)
  • mark: 16013
  • 2x groved ball bearings will be needed
  • widness: 18mm
45,44 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7103

Grooved ball bearing 16013 small

One row grooved ball bearing 16013, it fit in a gearbox from Trabant 601 from vintage october 1974 for differential side gear (differential case - final drive pinion)
High qualiy made by FAG !
  • mark: 16013
  • 2x groved ball bearings will be needed
  • widness: 11mm
53,21 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6016

Roller bearing 6017, FAG

Single row grooved ball bearing, fit to the Wartburg 353 gearbox:
Mounting place: 2x for differntial drive (1x Bevel drive gear and 1x Differential gear casing)
  • mark: 6017
  • outside diameter: 130mm
  • inside diameter:85mm
  • width: 22mm
  • made by: FAG
  • tow piece will be needed
81,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8061

Roller bearing 6206, FAG

Single row grooved ball bearing, fit to the Wartburg 353 gearbox:
Mounting place: 1x for bevel gear shaft (speedometer drive side)
  • mark: 6206
  • outside diameter: 62mm
  • inside diameter:30mm
  • width: 16mm
  • made by: FAG
  • 1x piece will be needed
14,09 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8060

Tapered roller bearing 3308 BD, FAG

Two row grooved ball bearing, fit to the Wartburg 353 gearbox:
1x for bevel gear shaft
  • mark: 3308
  • TNG TGL 2982
  • outside diameter: 90mm
  • inside diameter:40mm
  • width: 36,5mm
  • made by: FAG
  • 1x Tapered roller bearings will be needed
79,73 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6865

Grooved ball bearing 6304 C3

One row grooved ball bearing, fit to the Trabant 601 gearbox without vintage limit:
2x for driven shaft( cluth), 1x for driven shaft (shifting)
  • mark: 6304
  • bearing play: C3
  • made in Germany
  • 3x groved ball bearings will be needed
10,66 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6017

Bearing 6206 C2

One row grooved ball bearing 6206 C2.
  • Outside diameter: 62mm
  • Inside diameter: 30mm
  • wide: 16mm
  • typ: without cover
  • DIN 625
  • bearing clearance: C2
  • made in Germany
18,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7936

Bearing 6204 C2

One row grooved ball bearing 6204 C2.
  • Outside diameter: 47mm
  • Inside diameter: 20mm
  • wide: 14mm
  • typ: without cover
  • DIN 625
  • bearing clearance: C2
  • made in Germany
12,38 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7940

Roller bearing 6205 C2

One row grooved ball bearing 6205 C2.
  • Outside diameter: 52mm
  • Inside diameter: 25mm
  • wide: 15mm
  • typ: without cover
  • DIN 625
  • bearing clearance: C2
  • made in Germany
11,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7289

Roller bearing 6304 C2

One row grooved ball bearing 6304 C2.
  • Outside diameter: 52mm
  • Inside diameter: 20mm
  • wide: 15mm
  • typ: without cover
  • DIN 625
  • bearing clearance: C2
  • made in Germany
15,71 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7943

Wheel bearing set, 6206 C2, front axle hinge shaft drive

Front axle bearing-set fit to Trabant 500,600 and 601 with hinge shaft drive.
consit of:
  • 2 pieces bearings 6206 C2
  • 1 piece radial sealing 48 x 62 x 8 with additional dust lip
  • 1x snap ring wheel bearing
  • 1x lock plate axle

All parts made in Germany with high quality.
For each wheel side, one set will be needed
44,72 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7985

Wheel bearing set, rear axle 6206 C2

Rear axle bearing-set consit of:
  • 2 pieces bearings 6206 C2
  • 1 piece radial sealing 48 x 62 x 8 with additional dust lip
  • 1x snap ring wheel bearing
  • 1x lock plate axle

All parts made in Germany with high quality.
For each wheel side, one set will be needed
44,72 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7273

Wheel bearing set FAG, front axle hinge shaft

Front axle bearing-set for Trabant 500,600 and 601 with hinge shaft drive.
consit of:
  • 2 pieces bearings 6206 C2
  • 1 piece radial sealing 48 x 62 x 8 without additional dust lip
  • 1x grease
  • 1x lock plate axle

All parts maufactured by FAG.
For each wheel side, one set will be needed
44,90 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7984

Wheel bearing set, rear axle FAG

Rear axle bearing-set consit of:
  • 2 pieces bearings 6206 C2
  • 1 piece radial sealing 48 x 62 x 8 without additional dust lip
  • 1x grease
  • 1x lock plate axle

All parts maufactured by FAG.
For each wheel side, one set will be needed
44,90 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7481

Ball bearing 34 x 64 x 3 7 original DKF

Original stock of ball bearing for the Trabant 601 front axle with constant velocity drive shaft (tripode)
  • double row angular contact ball bearing front axle 34 x 64 x 37 2RSR
  • manufactured by DKF (DDR)
  • for one alxe you need 1 piece
25,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6862

Wheel bearing set FAG, front axle 34 x 64 x 3 7

Wheel bearing type 34 x 64 x 37 2RS made by FAG in Germany.
The ball bearing fits to Trabant 601 front axle with universal driven shaft new type (tripode) and also to Trabant 1.1 front axle.
  • delivery inclusive hub axle nut
  • total twoe piece will be needed
  • high quality, made by FAG

additional needed special tools for deassembly / assembly:
  • snap ring pliers
  • Werkstattpresse mit verschiedenen Matritzen und Dornen
48,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6322

Ball bearing, front axle 34 x 64 x 3 7

Doueble ball bearing for the front axle 34 x 64 x 37 2RS. Fit to Trabant 601 front axle constant velocity drive shaft (tripode), Trabant 1,1 front axle and VW Golf I.
  • two pieces will be needed for the complete axle
  • good quality, made in EU
  • delivery as an single part without mounting bits
Special offer normaly 23,57 € now 18,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 991

Snap ring for bearing for fan shaft

Snap ring to fix the both roller bearings 6202 at the Trabant axial cooling fan.
  • made in Germany
  • two pieces will be needed
0,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7290

Snap ring for V-pulley for fan shaft

Snap ring to fix the V-belt transmisions pulley at the Trabant axial cooling fan shaft.
  • made in Germany
  • one pieces will be needed
0,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7291

Roller bearing for fan shaft 6202

One row roller bearing 6202 for Trabant axial cooling fan.
  • made by DKF
  • made in Germany
  • two pieces will be needed
3,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 715

Roller bearing for fan shaft 6202 ZZ

One row roller bearing 6202 ZZ for Trabant axial cooling fan.
  • 2Z or ZZ is a symbol for both side covered
  • made by FAG
  • made in Germany
  • two pieces will be needed
6,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7112

Roller bearing 6003 ZZ

Single row roller bearing 6003, ZZ, 17x35x10.
Made by FAG.
Fit to AC generator 12V Trabant, Wartburg und Barkasrotor shaft front side
  • ZZ- synonym for bearing cover, both side
  • bearing play CN(CO)-normale bearing play
  • one piece will be needed
  • made by FAG
8,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6330

Roller bearing 6303 ZZ

Single row roller bearing 6303, ZZ, 17x47x14.
High Qualit made by FAG.
Fit to AC generator 12V Trabant, LDM-part-no.: 760 and AC generator 12V Trabant 1.1, Wartburg 1,3 and Barkas B1000-1 LDM-part-no.: 762 rotor shaft front side (end shild)
  • ZZ- synonym for bearing cover, both side
  • dimensions: d=17mm, D=47mm, widness=14mm
  • bearing play CN(CO)-normale bearing play
  • one piece will be needed
  • made by FAG
9,79 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6333

Grooved ball bearing for Fan-shaft and water pump shaft

FAG grooved ball bearing for shaft of water pump and fan shaft
for Wartburg 353 and B1000 (2-stroke)
  • high quality made by FAG
  • size: 12 x 37 x 12
  • for the water pump shaft of the Wartburg 353 and Barkas B1000: two pieces are needed
  • for the Fan shaft Barkas one piece will be needed
9,44 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6298

Grooved ball bearing, rear axle

Single side covered ball bearing for the rear axle of the Trabant 1.1
Two pieces needed for each wheel of rear axle
15,12 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1002

Groved ball bearing 6206 C3

Bearing for the Trabant 601 gearbox up to vintage 5.12.1968.
Mounted at at the shifting shaft.
  • mark: 6203 C3
  • one piece will be needed
10,71 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7314
The complete offer in Grooved ball bearing

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas