This site in german: Werkstattbedarf > Werkzeug 
You are here: > workshop requirement> tools
Navigation

tools

Category tools has the subcategory

The complete offer in tools

Spot weld driller, 6 mm

Special HSS-twist drill for car body making

Stable construction for hard drill jobs with hand drill. Especially fit to drill out spot welds and to drill thin-walled work pieces. Extremely high precision drill of steel sheet, brass sheet, aluminium sheet, zinc plate, sheet copper and plastic plates.
  • diameter: 6 mm
  • length: 66 mm
  • special cut with pike
  • surface: sheer
  • dextrorotatory
12,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6738

Spot weld driller, 8 mm

Special HSS-twist drill for car body making

Stable construction for hard drill jobs with hand drill. Especially fit to drill out spot welds and to drill thin-walled work pieces. Extremely high precision drill of steel sheet, brass sheet, aluminium sheet, zinc plate, sheet copper and plastic plates.
  • diameter: 8 mm
  • length: 80 mm
  • special cut with pike
  • surface: sheer
  • dextrorotatory
15,07 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6737

Impact wrench Hitachi WR16SA

Electrical impact screwdriver with right/left rotary.
Solid professional model with additional holding lever.
Strongest at this level: torque 360Nm
  • supply voltage 220V~
  • tetrahedral 1/2 inch
319,00 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6864

Dies set 29 parts

Complete kit with dies to tap metrical thread.
Best use for handmade.
Scope of delivery:
  • 3 pieces of dies M3
  • 1x twist drill for M3
  • 3 pieces of dies M4
  • 1x twist drill for M4
  • 3 pieces of dies M5
  • 1 pieces of dies M6
  • 1x twist drill for M6
  • 1x twist drill for M5
  • 3 pieces of dies M8
  • 1x twist drill for M8
  • 3 pieces of dies M10
  • 1x twist drill for M10
  • 3 pieces of dies M12
  • 1x twist drill for M12
72,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7470

Dies set 15 parts

Complete kit with dies to tap metrical thread.
Best use for handmade.
Scope of delivery:
  • 1 pieces of dies M3
  • 1x twist drill for M3
  • 1 pieces of dies M4
  • 1x twist drill for M4
  • 1 pieces of dies M5
  • 1x twist drill for M5
  • 1 pieces of dies M6
  • 1x twist drill for M6
  • 1 pieces of dies M8
  • 1x twist drill for M8
  • 1 pieces of dies M10
  • 1x twist drill for M10
  • 1 pieces of dies M12
  • 1x twist drill for M12
  • 1x tap wrench
69,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7473

plate shears with leverage effect, IDEAL, right

IDEAL-plate shears for straight cuttings with leverage effect to reduce the needed hand strength.
  • right side cutting
  • light version for thickness of plate up to 1,2 mm (sheet steel) or 1,0 mm (stainless steel sheet)
  • cutting unit made of die-forged stainless steel
  • cutting edges inductive hardened and with little teeth
  • with spring to open itself
38,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6095

Tinning paste, 250g

Ready for use, easy to spread paste to prepare soft-soldering of body sheet.

Remains of flux are water soluble and should given a wash thoroughly after tinning (before adding the tin-solder).
  • content: 250g
  • tin content: 40%
  • DIN 8511 F-SW 12/EN 29454
price 127,08 Euro / kg
31,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6739

Tinning paste, 250g

Ready for use, easy to spread paste to prepare soft-soldering of body sheet.

Remains of flux are water soluble and should given a wash thoroughly after tinning (before adding the tin-solder).
  • content: 250g
  • tin content: 40%
  • DIN 8511 F-SW 12/EN 29454
price 74,64 Euro / kg
18,66 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6740

Tin-solder 35%, 250g

Tin-solder stick

  • weight: about 250g
  • tin content: 35%
  • DIN 1707: L-PbSn35Sb
  • Solidus temperature: 186°C
  • Liquidus temperature: 235°C
Solidus temperature: temperature to start soften (nonliquid)Liquidus temperature: melting temperatureprice 74,68 Euro / kg
18,67 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6742

Tin-solder 40%, 250g

Tin-solder stick

  • weight: about 250g
  • tin content: 40%
  • DIN 1707: L-PbSn40Sb
  • Solidus temperature: 183°C
  • Liquidus temperature: 235°C
Solidus temperature: temperature to start soften (nonliquid)Liquidus temperature: melting temperatureprice 78,96 Euro / kg
19,74 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6743

Tin-solder 60%, 250g

Tin-solder stick

  • weight: about 250g
  • tin content: 60%
  • DIN 1707: L-Sn60Pb
  • Solidus temperature: 183°C
  • Liquidus temperature: 190°C
Solidus temperature: temperature to start soften (nonliquid)Liquidus temperature: melting temperatureprice 111,12 Euro / kg
27,78 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6744

32-parts screwdriver bit-set

Screwdriver bit-set with thirty screwdriver bits, one locator for screwdriver bits and one 3/8"-tetrahedral bit in a plastic box with girdle clip
screwdriver bits for screws with follow head-types are included:
  • Phillips-tip (size 1, 2 (2x), 3)
  • Pozidrive-tip (size 1, 2 (2x),3)
  • slotted-head (3mm, 4mm, 5mm, 6mm)
  • hexagon socket (3mm, 4mm, 5mm, 6mm)
  • Torx (T10, T15, T20, T25, T27, T30, T40)
  • Torx with pin (T10, T15, T20, T25, T27, T30, T40)
21,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6717

Adapter M18 ignition ajustment

adapter for the dial gauge to adjust the ignition point.
Fit to the spark plug tap M18. Hexagon nut for mounting SW 22.
usefull for the fallowing vehicles:
  • made in Germany
  • material: brass
  • Trabant 500,600,601
  • Wartburg 311
  • Framo
  • IFA F8 / F9
  • P70
28,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6819

Adapter M14 ignition ajustment

adapter for the dial gauge to adjust the ignition point.
Fit to the spark plug tap M14. Hexagon nut for mounting SW 22.
usefull for the fallowing vehicles:
  • made in Germany
  • material: brass
  • Trabant 601
  • Wartburg 353
  • Barkas B1000
28,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6818

Dial gauge simple type

High quality dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in Germany
  • scope of delivery without seperate extension pin
  • non shock proof
65,07 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6820

Extensions pin for Dial gauge, 60mm

Extension for dial gauge. Fit to all offered gauges
  • thread: M2,5
  • diameter: 4mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in China
  • scope of delivery without seperate extension pin
  • non shock proof
3,09 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7302

Dial gauge digitale type

Good quality dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in China
  • scope of delivery without seperate extension pin
  • non shock proof
45,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7301

Dial gauge simple type

Cheap dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in China
  • scope of delivery without seperate extension pin
  • non shock proof
24,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7300

Dial gauge shock proof

High quality dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in Germany
  • scope of delivery without seperate extension pin
  • shock proof
107,04 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6821

combination wrench with ratchet

wrench opening: 10mm
15,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6409

Combination wrench-set XL Gedore

8-pieces open-end spanner - combination wrench with different spanner gaps.
Spanner angular 15°, box wrench 15° bent off.

  • scope of delivery: wrench opening: 8,9,10,11,13,14,17,19
  • wo 8: length: 170mm
  • wo 9: length: 180mm
  • wo 10: length: 190mm
  • wo 11: length: 200mm
  • wo 13: length: 225mm
  • wo 14: length: 235mm
  • wo 17: length: 280mm
  • wo 19: length: 310mm
  • material: 31CrV3
  • surface: chromed
  • made by Gedore Germany
89,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6863

combination wrench HAZET, 17mm

High quality tool made by HAZET
  • wrench opening: 17mm
  • material: chromium-vanadium steel
  • box wrench 15° bent off
14,92 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6778

Set of locking pliers, 11-piece

eleven-piece set of locking pliers with workshop board
Very good suited for spot-welding with MIG-welding equipment
  • 3x with long nose
  • 4x with curved jaws and wire-cutter
  • 2x with curved jaws
  • 2x with straight jaws
199,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6779

bending tool for brake pipe

high-quality tool from HAZET

special for plastic coated brake pipes with diamter of 4,75 mm (our Art.No.: 662 und 663)
75,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6310

lever grease gun

german industry quality

pre-installed with reinforced hose and hydraulical connector
match grease cartridge: Art.No.: 6311
55,58 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6312

lubrication set

lubrication set consist of:
68,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6313

Pullers

puller for ball joint 18/38mm

gable width: 18 mm
max. lenght of ball joint axle: 38 mm

best use for track rod joints of Trabant and Wartburg.
59,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6192

puller for ball joint 23/48mm

gable width: 23 mm
max. lenght of ball joint axle: 48 mm
78,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6193

puller for ball joint 29/55mm

gable width: 29 mm
max. lenght of ball joint axle: 55 mm

fit to pull up the lever of steering gear
79,82 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6814

2-claw-puller 100 mm

spanning width: 100 mm
spanning depth: 100 mm
39,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6219

3-claw-puller 100 mm

spanning width: 100 mm
spanning depth: 100 mm
59,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6220

Cutting disk 125 x 0,8 for angle grinder

ultra-thin cutting disk fit for One hand- angle grinder
  • only 0,8 mm thin
  • outer diameter: 125 mm
  • inner diameter of mounting hole: 22,2 mm
  • free of iron and sulphur, usable also for stainless steel
  • particularly applicative for thin sheet metall (fast cutting with thin slit)
  • up to 12.200 rpms
  • one piece
3,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1317

cutting disk 125 x 0,8 for angle grinder (set of 10 pieces)

ultra-thin cutting disk fit for One hand angle grinder
  • only 0,8 mm thin
  • outer diameter: 125 mm
  • inner diameter of mounting hole: 22,2 mm
  • free of iron and sulphur, usable also for stainless steel
  • particularly applicative for thin sheet metall (fast cutting with thin slit)
  • up to 12.200 rpms
  • ten pieces
30,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1318

cutting disk 125 x 1,0 for angle grinder

thin cutting disk fit for One hand angle grinder
  • thickness: 1,0 mm
  • outer diameter: 125 mm
  • inner diameter of mounting hole: 22 mm
  • free of iron and sulphur, usable also for stainless steel
  • particularly applicative for thin sheet metall
  • up to 12.000 rpms
  • one piece
2,92 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1319
1+1

Knot wheel brush, 115 x 22,2 for angle grinder

Knot wheel brush fit for One hand angle grinder
  • outer diameter: 115 mm
  • inner diameter of mounting hole: 22,2 mm
  • brushes made of steel wire
  • for preparation of welding seams and cleaning
  • up to 12.500 rpms
  • one piece
Made in Germany
17,48 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6793

Piston ring pliers

Piston ring mounting and demounting tool.
With this pliers the changing of the piston rings will be simple and save, because the rins are retained at the outside.
  • working dimensions: 1-100mm
  • surface: nickel-plated
  • with blue plastic handles
  • made in Germany
35,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7619

Seeger ring pliers, external retaining rings 3-10mm

Snap ring mounting and demounting tool for shaft diameters 3-10mm
With this pliers the changing of seeger rings will be simple and save.
Straight version
With solid peaks.
Pliers is die-forged ond oil hardened.
  • working dimensions: 3-10mm
  • head polished
  • with red plasic handles
  • made in Germany by Knipex
20,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8320

Seeger ring pliers, external retaining rings 10-25mm

Snap ring mounting and demounting tool for shaft diameters 10-25mm
With this pliers the changing of seeger rings will be simple and save.
Straight version
With solid peaks.
Pliers is die-forged ond oil hardened.
  • working dimensions: 10-25mm
  • head polished
  • with red plasic handles
  • made in Germany by Knipex
20,17 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8321

Seeger ring pliers, external retaining rings 19-60mm

Snap ring mounting and demounting tool for shaft diameters 19-60mm
With this pliers the changing of seeger rings will be simple and save.
Straight version
With solid peaks.
Pliers is die-forged ond oil hardened.
  • working dimensions: 19-60mm
  • head polished
  • with red plasic handles
  • made in Germany by Knipex
23,14 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8322

Seeger ring pliers, internal retaining rings 8-13mm

Snap ring mounting and demounting tool for bore / hole diameters 8-13mm
With this pliers the changing of seeger rings will be simple and save.
Straight version
With solid peaks.
Pliers is die-forged ond oil hardened.
  • working dimensions: 8-13mm
  • head polished
  • with red plasic handles
  • made in Germany by Knipex
19,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8331

Seeger ring pliers, internal retaining rings 12-25mm

Snap ring mounting and demounting tool for bore / hole diameters 12-253mm
With this pliers the changing of seeger rings will be simple and save.
Straight version
With solid peaks.
Pliers is die-forged ond oil hardened.
  • working dimensions: 12-25mm
  • head polished
  • with red plasic handles
  • made in Germany by Knipex
17,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8333

Seeger ring pliers, internal retaining rings 19-60mm

Snap ring mounting and demounting tool for bore / hole diameters 19-60mm
With this pliers the changing of seeger rings will be simple and save.
Straight version
With solid peaks.
Pliers is die-forged ond oil hardened.
  • working dimensions: 19-60mm
  • head polished
  • with red plasic handles
  • made in Germany by Knipex
21,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8330

Seeger ring pliers, internal retaining rings 40-100mm

Snap ring mounting and demounting tool for bore / hole diameters 40-100mm
With this pliers the changing of seeger rings will be simple and save.
Straight version
With solid peaks.
Pliers is die-forged ond oil hardened.
  • working dimensions: 40-100mm
  • head polished
  • with red plasic handles
  • made in Germany by Knipex
18,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8332
The complete offer in tools

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas