brake system

The complete offer in brake system

brake fluid, DOT4, 0,25 litre

Detail

for use in Trabant, Wartburg, B1000, trailer and camper with hydraulical brake system and a lot of other car types

volume: 250 ml

Additional comment: Notes for used oil disposal

price per liter: 20,16 Euro

5,04 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6200

brake fluid, DOT4, 0,5 litre

Detail

for use in Trabant, Wartburg, B1000, trailer and camper with hydraulical brake system and other cars

volume: 500 ml

Additional comment: Notes for used oil disposal

price per Liter: 13,18 Euro

6,59 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6201

brake fluid, DOT4, 1,0 litre

Detail

for use in Trabant, Wartburg, B1000 and other cars

volume: 1,0 l
norms: FMVSS Nr.116 DOT4 und DOT3, SAEJ1703, DIN/ISO 4925

Additional comment: Notes for used oil disposal

price per Liter: 11,22 Euro

11,22 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6202

lever for parking brake

Detail

handbrake lever for the parking brake of the caravan Qek.

delivery inclusive unkock push button and toothed segment
one piece will be needed

175,00 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6993

Master brake cylinder - one circle, original

Detail

Installed in braked version of camper with hydraulical brake system (QEK Junior/Aero, Bastei, Intercamp/Oase)

overhauled spare part
exchange spare part
delivery without reservior for brake fluid and mounting equipment
one piece will be needed
Please note, we can only exchange you this spare part if you ship 1x used master brake cylinder with the type number TGL BH7 to our company in advance!
to use this master break cylinder one reservoir for brake fluid will be needed

Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.

76,35 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7190

Master brake cylinder - one circle, complete

Detail

Used in braked version of camper with hydraulical brake system (QEK Junior/Aero, Bastei, Intercamp/Oase)

new produced, made in EU
one piece will be needed
delivery inclusive reservoir for brake fluid

68,00 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6945

Protection bellows for pressure bar input brake master cylinder Detail
4,95 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6947

Clip for protection bellows

Detail

Snap ring for mounting the protection bellows, LDM-part.no.: 6974 at the brake master cylinder, LDM-part.no.: 6945 or brake master cylinder, LDM-part.no.: 7190 to seal the push rod.

delivery as single part
material: spring wire
one piece will be needed

1,70 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8066

Tank for brake fluid 1 circle

Detail

Reservoir for brake fluid for Trabant 601 with single-circle brake master cylinder, up to vintage: april 1980 and many trailer and camper with hydraulical brake system

scope of delivery: inclusive cap
one piece will be needed

17,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 191

Sleeve set single brake master cylinder, original, trailer

Detail

Complete repair set for the 1-circle brake master cylinder.
The sleeves was mounted up to vinatge april 1980 at Trabant 601.

material: rubber
made in Germany
one set will be needed

14,25 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7285

Sleeve set single brake master cylinder, trailers

Detail

Complete repair set for the original 1-circle brake master cylinder (not fit to our new manufactured master breake cylinder).

material: rubber
made in EU
one set will be needed

10,45 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6946

Rear wheel-brake cylinder, original

Detail

Complete in Germany overhauled rear wheel brake cylinder with ring sleeves, brak-piston D=15,87mm.
Mark: RENAK BZ 105
Fit to Trabant 601 from 1.4.1968 onwards.

scope of delivery: inclusive ring sleeves and bleeder screw
break piston diameter: 15,87mm
also used for some IFA-vehicles, Camptourist tent trailer
two pieces will be needed

also for Camptourist tent trailer
Please note, we can only exchange you this spare part if you ship 1x wheel brake cylinder with the mark Renak BZ 105 to our company in advance!

Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.

78,54 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7191

Rear wheel-brake cylinder, original 19mm

Detail

Complete in Germany overhauled rear wheel brake cylinder with ring sleeves, brak-piston D=19,04mm.
Fit to Trabant 601 up to 03.1968 and Trabant 1,1 all models.

scope of delivery: inclusive ring sleeves and bleeder screw
break piston diameter: 19,04mm
also used for some IFA-vehicles, Camptourist tent trailer
two pieces will be needed

55,63 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7462

Rear wheel-brake cylinder, 15mm, no name

Detail

Complete rear wheel brake cylinder with ring sleeves and brak-piston D=15,87mm.
Reproducition spare part as low budget product.
Fit to Trabant 601 from 1.4.1968 onwards.

scope of delivery: inclusive ring sleeves, without bleeder screw
break piston diameter: 15,87mm
also used for some IFA-vehicles, Camptourist tent trailer
two pieces will be needed

also for Camptourist tent trailer

21,42 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8212

Rear wheel-brake cylinder

Detail

complete rear wheel brake cylinder with ring sleeves, brak-piston D=15,87mm.
Fit to Trabant 601 from 1.4.1968 onwards.

scope of delivery: inclusive ring sleeves, without bleeder screw
break piston diameter: 15,87mm
also used for some IFA-vehicles, Camptourist tent trailer
made in EU
two pieces will be needed

also for Camptourist tent trailer

27,59 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6040

Rear wheel-brake cylinder, 19,05mm

Detail

Brake cylinder for the rear wheel brake sytem of the Trabant 500, 600 and 601 (with vintage definition)
Reproduction with high quality.

made in Italy
complete pre-assembled with rubber sealings
bore diameter 19,05 mm
fit to Trabant up to vintage 31.3.1968
fit to the rear axle left and right hand
fit also for the camper Qek
delivery without bleeder screw
two pieces will be needed

additional needed bits, not part of this offer. Please order separately:
2x LDM-part.no.:7532 mounting screw for wheel brake cylinder
LDM-part.no.:214 bleeder screw for wheel brake cylinder
LDM-part.Nr.:215 dust cap for bleeder screw

special tools for disassembly / assembly:

no special tools needed to install the wheel brake cylinder at the Trabant or Qek brake plate

28,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 212

1+1

Bleeder screw, rear - brake suddle front

Detail

Bleeder screw for rear wheel brake cylinder Rear wheel-brake cylinder piston = 19,05mm and Rear wheel-brake cylinder piston = 15,87mm Trabant 601, Trabant 1.1 and QEK-caravans.
The bleeder screw fit also to Brake suddle left hand and Brake suddle right hand Wartburg 353 and Wartburg 1,3.
3 pieces will be needed for each brake suddle.

thread: M8 X 1,25

2,45 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 214

Brake drum set, slotted

Detail

The brake drum kit consist of two slotted brake drums.
Fit to the front and to the rear axle of Trabant 500, 600 and 601 (all 2-stroke typs).
Also useable for QEK-camper

circle of wheel bolts: 4 x 160 mm
diameter: 200 mm
made in EU
one set will be needed for each axle

price 44,11 Euro / piece

88,22 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7621

Brake drum ( single part ), slotted

Detail

The brake drum fit to the front and to the rear axle of Trabant 500, 600 and 601 (all 2-stroke typs).
Also useable for QEK-camper

circle of wheel bolts: 4 x 160 mm
diameter: 200 mm
made in EU
one piecewill be needed for each wheel

59,66 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 304

Upper release spring ( long )

Detail

Spring for brake shoes front and rear axle.

length: 132 mm
diameter: 10 mm
galvaniced
made in EU
6 pieces will be needed for each car
made in Germany

2,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 314

Lower release spring ( short )

Detail

spring for brake shoes front and rear axle

length: 67 mm
diameter: 10 mm
made in EU
1 piece will be needed for each rear wheel brake side

2,45 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 313

Brake shoe set hydraulic brake system

Detail

The brake shoe rear set fit to trailers and campers like Qek and Camptourist / Klappfix with hydraulic brake system.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining without lever for the hand brake cable, 2x rivet.

2x lining length: 215 mm
2x lining length: 165 mm
lining thickness: 4 mm
wide: 30 mm
for brake drum diameter: 200 mm
one set will be needed for each trailer

29,47 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7958

Rear brake shoe set complete

Detail

The brake shoe rear set consist of an metal basic part and an lining.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining inclusive mounted lever for the hand brake cable.
Fit to Trabant 601 and Trabant 1,1.
Also fit to some trailers and campers like Qek and Camptourist / Klappfix with hydraulic brake system.

2x lining length: 215 mm
2x lining length: 165 mm
lining thickness: 4 mm
wide: 30 mm
for brake drum diameter: 200 mm
one set will be needed for each car

45,22 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8593

Rivet bolt for hand-brake lever

Detail

Rivet bolt for mounting the hand brake lever at the rear brake shoe (short lining).
Fit to Tarabant 601 and Trabant 1,1 rear axle, Wartburg 311,312,353,1.3 and Anhänger wie Qek, Intercamp, Oase, Camptorist, Klappfix.

material: steel, galvaniced
one piece for each rear brake

1,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 183

Brake parts mechanical brake system

Brake shoe set mechanical brake system, overhauled in Germany

Detail

The brake shoe rear set fit to trailers and campers like Qek and Camptourist / Klappfix and HP 500 with mechanical brake system.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining.
Excange part, complete overhauled in Germany.

2x lining length: 215 mm
2x lining length: 165 mm
lining thickness: 4 mm
wide: 30 mm
for brake drum diameter: 200 mm
one set will be needed for each trailer

Overhaul part, please send one set of brake shoes in advance to our company!

139,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7959

Brake shoe set for mechanical brake system

Detail

2x lining length: 215 mm
2x lining length: 165 mm
lining thickness: 4 mm
wide: 30 mm
for brake drum diameter: 200 mm
one set will be needed for each trailer

new reproduction

119,53 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8062

Brake shoe set for mechanical brake system, with springs

Detail

2x lining length: 215 mm
2x lining length: 165 mm
lining thickness: 4 mm
wide: 30 mm
for brake drum diameter: 200 mm
one set will be needed for each trailer

new reproduction

165,53 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8148

Release spring kit for mechanival brake system

Detail

This spring set fit to trailers and campers like Qek and Camptourist / Klappfix and HP 500 with mechanical brake system.

New production, made in EU.
one set will be needed for each trailer

new reproduction

38,14 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8445

Brake cable for mechanival brake system, 1,44m, 560mm

Detail

Brake wire fit for trailers and campers like Qek and Camptourist / Klappfix and HP 500 with mechanical brake system.
Connection between balance arm and brake mechanic inside of the brake base plate

total length: about 1,44 m
length of the cover: 560 mm
New production, made in EU.
2 pieces will be needed for each trailer

new reproduction

19,04 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8463

Brake cable for mechanival brake system, 1,44m, 660mm

Detail

Brake wire fit for trailers and campers like Qek and Camptourist / Klappfix and HP 500 with mechanical brake system.
Connection between balance arm and brake mechanic inside of the brake base plate

total length: about 1,44 m
length of the cover: 660 mm
New production, made in Germany
2 pieces will be needed for each trailer

new reproduction

62,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8469

Pressure web, right hand - rear wheel brake

Detail

The pressure web is fixed between the two rear wheel brake shoes to transmit the power of the mechanical handbrake to both of the brake shoes.

material: metal, galvaniced
place: rear wheel brake, right hand
original spare part
fit to Trabant 601 and Trabant 1,1
one piece will be needed

15,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 307

Pressure web, left hand - rear wheel brake

Detail

The pressure web is fixed between the two rear wheel brake shoes to transmit the power of the mechanical handbrake to both of the brake shoes.

material: metal, galvaniced
place: rear wheel brake, left hand
original spare part
fit to Trabant 601 and Trabant 1,1
one piece will be needed

15,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 306

Retainer clip for release spring

Detail

Retainer for the release spring for push piece between the rear brake shoes.
Fit for all Trabant 500, 600, 601 and 1.1
Fit the the left and right rear brake.

Material: spring clip
Reproduction
2 pieces will be needed

3,37 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8561

Spring rubber pad, complete for rear axle (leaf spring) Detail Fit to rear axle of Trabant 500, 600 and 601 with vintage up to 1987 with leaf spring Also fit to Qek camper und folded tent trailer Klappfix / camptourist
12,42 €inclusive VAT, plus shipping costs temporary not available Art.No. 997

Brake hose short, Qek camper

Detail

short brake hose with female and male thread connection
To connect the distributor with brake line of Qek camper

thread: M10 x 1
length complete: 18 cm
two pieces will be needed

7,23 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6986

Brake hose longer, Qek

Detail

Extended brake hose for Qek camper with hydraulical brake system

Length total: 225 mm
one side with core thread port M10x1
other side with external thread port M10x1
one piece will be needed for each wheel side

8,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6987

Universal boot kit

Detail

Bellows for many exertions at automobiles, trailers, caravans and ships ...
size:

length:19cm diameter:10mm / 30mm
length:23cm diameter: 35mm / 35mm
length:15cm diameter:30mm / 42mm
length:13cm diameter:41mm / 48mm
length:12cm diameter:41mm / 55mm
different length and diameter combinable
length of the bellow pice: 95mm

17,28 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7010

Pressure spring spline end for brake shoes

Detail

Spring for the automatic adjuster of the break shoes at the brake base plate.
This spring press the look plate that the sliding element can work only in one direction.
fit to follow brake systems:

4 pieces for brake drum front axle Trabant 601
4 pieces for brake drum rear axle Trabant 601 or 1,1
2 pieces for trailer Qek with hydraulic brake system
delivery as an single part
made in Germany

additional needed tools for deassembly / assembly:

no special tools will be needed

2,30 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8264

Safety box for parking trailers Detail Metal box to protect the parked trailer. Scop of delivery inclusive padlock.
22,35 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 8416

Shock absorber for overrun brake of trailer (E10-201-120/35)

Detail

High-pressure pneumatic spring for the overrun brake of the trailer type HP500, HP650 and Camper Oek Junior and Aero. (made in GDR)

Type: E10-201-120/35
scope of delivery inclusive bushing
inner diameter of upper mounting eye: 10 mm
inner diameter of upper mounting eye: 16 mm
Length of outer core barrel: 30 cm
extended length: 52,5 cm (between center of mounting eyes)
made in Germany
1 piece will be needed

98,45 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7036

Rubber ring for shock absorber for overrun brake of trailer

Detail

Ring for mounting at the high-pressure pneumatic spring for the overrun brake of the trailer type HP500, HP650 and Camper Oek Junior and Aero. (made in GDR)
Fit for spring types: E10-201-120/35 and E10-201-210/55

Material: rubber
made in Germany
2 pieces will be needed

4,67 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8460

The complete offer in brake system

* All prices inclusive VAT and plus shipping costs.