This site in german: Anhänger > Qek 
You are here: > Trailer> Qek-camper

Qek-camper

Category Qek-camper has the subcategory

The complete offer in Qek-camper

Disk wheel, overhauled 4J x 13 Zoll (silver)

Steel rim for Trabant 601 complete overhauled and silver varnished.
  • new or used rim
  • sandblasted
  • primed
  • silver varnished with 2-K varnish
  • pitch circle 4 x 160
  • rim wide: 4J
  • rim diameter: 13 Zoll
  • center disc wheel ET 35
95,33 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6403

Disk wheel, overhauled 4J x 13 Zoll

Steel rim for Trabant 601 complete overhauled and prime coated.
  • new or used rim
  • sandblasted
  • primed
  • pitch circle 4 x 160
  • rim wide: 4J
  • rim diameter: 13 Zoll
  • center disc wheel ET 35
69,33 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 986

Sealing rubber set

Profile rubber for all pans of the camper Qek Junior.
Set consitst of rubber (black) and filler (black)
  • made in Germany
  • one set will be needed
134,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7353

Shock absorber for overrun brake of trailer (E10-201-120/35)

High-pressure pneumatic spring for the overrun brake of the trailer type HP500, HP650 and Camper Oek Junior and Aero. (made in GDR)
  • Type: E10-201-120/35
  • scope of delivery inclusive bushing
  • inner diameter of upper mounting eye: 10 mm
  • inner diameter of upper mounting eye: 16 mm
  • Length of outer core barrel: 30 cm
  • extended length: 52,5 cm (between center of mounting eyes)
  • made in Germany
  • 1 piece will be needed
98,45 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7036

Rubber ring for shock absorber for overrun brake of trailer

Ring for mounting at the high-pressure pneumatic spring for the overrun brake of the trailer type HP500, HP650 and Camper Oek Junior and Aero. (made in GDR)
Fit for spring types: E10-201-120/35 and E10-201-210/55
  • Material: rubber
  • made in Germany
  • 2 pieces will be needed
4,67 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8460

Rubber ring coil spring

Rubber buffer for coil spring upper and under side.
Fit for the charges trailer HP500.01 and HP650.01 or Qek Campers based on HP500.01 or HP650.01
The rubber ring is mounted between spring and axle and between spring and dome.
  • material: rubber, black
  • made in Germany
  • 4 pieces will be needed
4,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8448

Coil spring, stronger Qek Junior / Aero

Enhanced spring for the Qek caravan axle.
Fit to the models Junior and Aero.
  • made in Germany
  • wire: +1mm thikness
  • length: +3cm
  • two pieces will be needed
87,02 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8154

Telescopic shock absorber for stronger coil spring

Shock absorber for the camper Qek Junior + Aero (made in GDR).
Fit for the stronger spring LDM-part.Nr.: 8154
  • scope of delivery inclusive bushing
  • mounting eye on both ends
  • made in Germany
  • 2 pieces will be needed
93,17 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8542

Coil spring Qek Junior / Aero

Spring for the Qek caravan axle.
Fit to the models Junior and Aero.
  • made in Germany
  • two pieces will be needed
73,48 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6773

Telescopic shock absorber

Shock absorber VK350 + 351for the camper types Bastei,Intercamp/Oase and Qek Junior + Aero (made in GDR).
Buffer Type: A2-150-160/50
  • scope of delivery inclusive bushing
  • mounting eye on both ends
  • brand manufacturer
  • 2 pieces will be needed
117,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6944

shaft seal 35 x 62 x 7

shaft seal 35 x 62 x 7
simple version without dust lip

for ball bearings (wheel bearing) of camptourist/Klappfix trailer and Qek campers only with mechanical overrun brake
Not fit to these trailer/camper if hydraulical brake system built in
5,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6395

shaft seal 35 x 62 x 7 with dust lip

shaft seal 35 x 62 x 7 with additional dust lip

for ball bearings (wheel bearing) of camptourist/Klappfix trailer and Qek campers only with mechanical overrun brake
Not fit to these trailer/camper if hydraulical brake system built in

protects the sealing lips better from brake dust
11,19 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6396

shaft seal 40 x 62 x 10 with dust lip

shaft seal 40 x 62 x 10 with additional dust lip

for ball bearings (wheel bearing) of camptourist/Klappfix trailer and Qek campers only with hydraulical overrun brake
Not fit to these trailer/camper if mechanical brake system is built in.

protects the sealing lips better from brake dust
9,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6978

Dust cap for wheelhub Qek

Grease cap for wheel hub to protect the bearings against dust and moisture.
Fit for the caravan Qek Junior and Aero as well at the trailers.
  • delivery as single part
  • surface: galvaniced
21,19 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8453

Wheel bearing 6206 C2

One row grooved ball bearing 6206 C2, bearing for rear axle Trabant 601 and front axle Trabant 601 (univesal driven shaft-old type, up to 03/1984).
For one wheel will be needed 2 pices.
For a complete Trabant 601 with univesal driven shaft-old type you will need 8x 6206 C2.
For a Trabant with universal driven shaft-new type (tripode)you will need 4 pices.
  • made in Germany
18,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 992

Wheel bearing set, Qek

Wheel bearing-kit for the DDR caravan trailers Qek Junior and Aero.
This set consit of:
  • 2 pieces bearings 6206 C2
  • 1 piece radial sealing 35 x 62 x 7 with additional dust lip
  • 1x snap ring wheel bearing

All parts made in Germany with high quality.
Tatal two sets will be needed.
made in Germany
37,18 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8452

Pressure sleeve for wheel bearings, Qek

One pressure tubee to keep apart the inner rings of both ball bearings (6206 C2) from the axle of the trailer Qek.
  • Can be used for the DDR camper Qek 325
  • For one wheel will be needed 1 piece (total: 2 pieces)
  • material: steel, blank
  • made in Germany
18,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8434

Lamp for number plate right/left

New lamp for number plate lighting from right or left side of number plate
Fit to all closed body variants of Barkas B1000 (bus, transporter, ambulance) and many campers and trailers
  • scope of delivery without bulbs (10W Ba15s)
  • hole distance for mounting: 72 mm (not 75 mm9
  • two pieces will be needed for each vehicle
23,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7346

Lamp for number plate semicircular right/left

Beautyful lamp for number plate lighting from right or left side of number plate
Fit to all closed body variants of Barkas B1000 (bus, transporter, ambulance) and many campers and trailers
  • scope of delivery without bulbs 5W
  • hole distance for mounting: 72 mm (not 75 mm
  • two pieces will be needed for each vehicle
11,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7364

Side light round, metal housing

Front side light with firm metal case.
Mounting can be easily by the center bolt M6.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Good alternative for IFA vehicles, trailers and campers.
  • high quality
  • diameter: 67mm
  • size: 57 mm
  • lense: clear (withe light)
12,15 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7365

Side light round

Front side light with plastic case.
Mounting can be easily by two screws holes diameter: 5mm.
Hole distance: 46mm.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Good alternative for IFA vehicles, trailers and campers.
  • high quality
  • diameter: 80mm
  • size: 41 mm
  • lense: clear (withe light)
11,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7366

Side light round, original design

Front side light as good reproduction of the original lights.
Mounting can be easily by two bolts M5 like the original one.
Hole distance: 58mm.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Best replacment for the original one.
Fit to many IFA vehicles, trailers and campers.
  • made in EU
  • diameter: 81mm
  • size: 41 mm
  • lense: clear (withe light)
9,19 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7868

Side light angular

Front side light with plastic case.
Mounting can be easily by two screws holes diameter: 5mm.
Hole distance: 30mm.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Good alternative for IFA vehicles, trailers and campers.
  • high quality
  • size bas plate: 62 x 62mm
  • size: 42 mm
  • lense: clear (withe light)
9,08 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7367

wheel bolt 40mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 40mm consist the length of thread and the length of knurling.
  • legth: 40mm
  • thread: M12 x 1,5
  • thread length: 28mm
  • knurling diameter: 14,5mm
  • knurling length: 7,6mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
4,98 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7200

wheel bolt 50mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 50mm consist the length of thread and the length of knurling.
  • legth: 50mm
  • thread: M12 x 1,5
  • thread length: 38mm
  • knurling diameter: 14,5mm
  • knurling length: 7,6mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
4,86 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6450

wheel bolt 60mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 60mm consist the length of thread and the length of knurling.
  • legth: 60mm
  • thread: M12 x 1,5
  • thread length: 48mm
  • knurling diameter: 14,5mm
  • knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,62 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7201

wheel bolt 80mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 80mm consist the length of thread and the length of knurling.
  • legth: 80mm
  • thread: M12 x 1,5
  • thread length: 68mm
  • knurling diameter: 14,5mm
  • knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7203

Universal boot kit

Bellows for many exertions at automobiles, trailers, caravans and ships ...
size:
  • length:19cm diameter:10mm / 30mm
  • length:23cm diameter: 35mm / 35mm
  • length:15cm diameter:30mm / 42mm
  • length:13cm diameter:41mm / 48mm
  • length:12cm diameter:41mm / 55mm
  • different length and diameter combinable
  • length of the bellow pice: 95mm
17,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7010

Carrying wheel 120mm

Carrying wheel fit to GDR trailers and campers types Bastei,Intercamp/Oase and Qek Junior + Aero.
  • scope of delivery inclusive crank, but without Clamp retainer!
  • tube diameter: 48mm
  • tube length: 32cm
  • one pieces will be needed
25,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8454

Clamp retainer 48mm

Clamp retainer for the carrying wheels with 48mm tube diameter.
Fit to GDR trailers and campers types Bastei,Intercamp/Oase and Qek Junior + Aero.
  • single part without mounting bits
  • for tube diameter: 48mm
  • one pieces will be needed
25,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8455

Shock absorber for overrun brake of fold tent camper *Camptourist* (E10-201-210/55)

High-pressure pneumatic shock absorber for the overrun brake of the fold tent trailer type Camptourist (made in GDR)
  • Type: E10-201-210/55
  • scope of delivery inclusive bushing
  • inner diameter of upper mounting eye: 10 mm
  • inner diameter of upper mounting eye: 16 mm
  • Length of outer core barrel: 30 cm
  • extended length: 52,5 cm (between center of mounting eyes)
  • made in Germany
  • 1 piece will be needed
98,45 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7037
The complete offer in Qek-camper

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas