This site in german: Anhänger > Intercamp / Oase 
You are here: > Trailer> Intercamp / Oase

Intercamp / Oase

The complete offer in Intercamp / Oase

Telescopic shock absorber

Shock absorber VK350 + 351for the camper types Bastei,Intercamp/Oase and Qek Junior + Aero (made in GDR).
Buffer Type: A2-150-160/50
  • scope of delivery inclusive bushing
  • mounting eye on both ends
  • brand manufacturer
  • 2 pieces will be needed
117,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6944

Brake shoe 50mm

Brake shoe complete, with lining
  • brake drums with inner diameter of 230 mm
  • wide: 50mm
  • tatal 4 pieces will be needed
for brake drum in connection with wheel brake cylinder
12,88 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6968

Spring set brake shoe

Complete spring kit fit to camper Bastei and Intercamp / Oase
wide: 50 mm
contents:
2x release spring short
2x release spring long
13,71 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7740

Brake drum 50mm

Drum fit to the wheel brake of the camper *Intercamp*
The brake shoewidth is 50mm
  • bolt circle 4 x 160mm
  • inside diameter: 230mm
  • made in EU
  • for each car 2 pieces will be needed
42,95 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6967

Weel-brake cylinder, M10x1

Wheel brake cylinder for hydraulic brake system of trailer
if brake shoe is 50 mm and inner diameter of brake drum is 230 mm

piston-diameter: 25,35 mm
connection thread for brake hose/ brake line: M10x1
  • one piece will be needed for each wheel side
47,01 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6730

Weel-brake cylinder overhauled, M10x1

Complete in Germany overhauled rear wheel brake cylinder with cap sleeves, brak-piston D=25,35mm.
Mark: IFA BHL
Wheel brake cylinder for hydraulic brake system of trailer
if brake shoe is 50 mm and inner diameter of brake drum is 230 mm

piston-diameter: 25,35 mm
connection thread for brake hose/ brake line: M10x1
  • one piece will be needed for each wheel side
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
76,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8017

Ring sleeve, for wheel brake cylinder, complete

Ring sleeve, for wheel brake cylinder.
Fit to camper Bastei and Intercamp/Oase
Comlete set for one wheel brake cylinder (incl. 2 pieces)
  • fit to brake cylinder diameter 25,35mm
  • One set will be needed for each wheel side
9,83 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6943

Sleeve set, for wheel brake cylinder, Germany

Original ring sleeve set for rear wheel brake cylinder type: CZ5.
Fit to the camper Intercamp and Bastei.
  • fit to brake cylinder diameter 25,35mm
  • Comlete set for one wheel brake cylinder: 2x cap sleeve, 2x dust cap
  • all rubber seals ar made in Germany
  • material: break fluid resistant rubber
  • One set will be needed for each wheel side rear
18,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8051

Sleeve set single brake master cylinder, original, trailer

Complete repair set for the 1-circle brake master cylinder.
The sleeves was mounted up to vinatge april 1980 at Trabant 601.
  • material: rubber
  • made in Germany
  • one set will be needed
14,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7285

Master brake cylinder - one circle, original

Installed in braked version of camper with hydraulical brake system (QEK Junior/Aero, Bastei, Intercamp/Oase)
  • overhauled spare part
  • exchange spare part
  • delivery without reservior for brake fluid and mounting equipment
  • one piece will be needed
  • Please note, we can only exchange you this spare part if you ship 1x used master brake cylinder with the type number TGL BH7 to our company in advance!
  • to use this master break cylinder one reservoir for brake fluid will be needed
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
76,35 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7190

Master brake cylinder - one circle, complete

Used in braked version of camper with hydraulical brake system (QEK Junior/Aero, Bastei, Intercamp/Oase)
  • new produced, made in EU
  • one piece will be needed
  • delivery inclusive reservoir for brake fluid
68,00 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6945

Sleeve set single brake master cylinder, trailers

Complete repair set for the original 1-circle brake master cylinder (not fit to our new manufactured master breake cylinder).
  • material: rubber
  • made in EU
  • one set will be needed
10,45 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6946

Tank for brake fluid 1 circle

Reservoir for brake fluid for Trabant 601 with single-circle brake master cylinder, up to vintage: april 1980 and many trailer and camper with hydraulical brake system
  • scope of delivery: inclusive cap
  • one piece will be needed
17,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 191

Clip for protection bellows

Snap ring for mounting the protection bellows, LDM-part.no.: 6974 at the brake master cylinder, LDM-part.no.: 6945 or brake master cylinder, LDM-part.no.: 7190 to seal the push rod.
  • delivery as single part
  • material: spring wire
  • one piece will be needed
1,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8066

Protection bellows for pressure bar input brake master cylinder

4,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6947

Rivet bolt for hand-brake lever

Rivet bolt for mounting the hand brake lever at the rear brake shoe (short lining).
Fit to Tarabant 601 and Trabant 1,1 rear axle, Wartburg 311,312,353,1.3 and Anhänger wie Qek, Intercamp, Oase, Camptorist, Klappfix.
  • material: steel, galvaniced
  • one piece for each rear brake
1,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 183

release spring for brake shoes, short

short version of release spring for break shoes
fit to follow brake systems:
  • brake drum rear axle Wartburg 353 (one piece for each wheel side)
  • brake drum rear axle B1000 (one piece for each wheel side)
  • trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9): one piece for each wheel side
2,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6455

Pressure spring for brake shoes

Spring to fix the break shoes at the brake base plate.
fit to follow brake systems:
  • 4 pieces for brake drum front axle Wartburg 353
  • 4 pieces for brake drum rear axle W353 and 1.3
  • 4 pieces for brake drum front axle B1000 and B1000-1
  • 4 pieces for brake drum rear axle B1000, B1000-1
  • 2 pieces for trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9)
  • delivery as an single part
  • made in Germany
2,83 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8195

release spring for brake shoes, long

long version of release spring for break shoes
fit to follow brake systems:
  • brake drum front axle Wartburg 353 (two pieces for each wheel side)
  • brake drum rear axle W353 (one piece for each wheel side)
  • brake drum front axle B1000 (two pieces for each wheel side)
  • brake drum rear axle B1000 (one piece for each wheel side)
  • trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9): one piece for each wheel side
3,18 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6454
1+1

brake hose for trailer/camper

brake hose for camper Bastei and Camper
maybe also fit to other types of trailer/ camper (for technical specifications see below)

length ca. 50 cm
type of thread: M10x1
1x female thread
1x male thread
14,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1103

outer wheel bearing (Bastei/Intercamp/Oase)

Outer tapered roller bearing for wheel bearing of camper Bastei and Camper Intercamp/ Oase
12,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6988

outer wheel bearing (Bastei/Intercamp/Oase)

Inner tapered roller bearing for wheel bearing of camper Bastei and Camper Intercamp/ Oase

For one wheel you will need one piece of that bearing (two pieces for hole axle)
14,17 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6989

Profile for external door-duct

Profile for external door-duct weather strip. Door sealing rubber.
  • length: 6 meter
  • made in Germany

Fit for camper "Intercamp"
41,13 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6412

Sealing rubber set Intercamp/ Oase

Profile rubber for the front and rear pans of the camper Intercamp and Oase.
Set consitst of one piece of 8,5m sealingrubber (black).
For each pane one piece of 4,25m will be needed.
  • made in Germany
  • one set will be needed
171,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7623

hree chamber rearlight, round right / left hand

Round model of the 3 chamber rearlight. Complete component with carrier for bulbs.
Structre: top 21W stop light, below 5W rear light, midle 21W flashing light.
Fit to many IFA-vehicles.
  • made EU
  • diameter glas: 135 mm
  • diameter base body: 143mm
  • highness: 75 mm
  • scope of delivery without bulbs
34,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7206

Glas for three chamber rearlight, round, with number plate light

Glas for round model of the 3 chamber rearlight.
Structre: top 21W stop light, below 5W rear light, middle 21W flashing light.
The lower part is made transparent for number plate lighting.
Fit to many IFA-vehicles and trailer.
  • made in Germany
  • diameter glas: 135 mm
  • highness: 55 mm
18,47 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6672

Glas for three chamber rearlight, round, without number plate light

Glas for round model of the 3 chamber rearlight.
Structre: top 21W stop light, below 5W rear light, middle 21W flashing light.
Fit to many IFA-vehicles and trailer.
  • made in Germany
  • diameter glas: 135 mm
  • highness: 55 mm
18,47 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6496

Three chamber rearlight, round right / left hand, with number plate lighting

Round model of the 3 chamber rearlight. Complete component with carrier for bulbs.
Structre: top 21W stop light, below 5W rear light, midle 21W flashing light.
Clear lense for number plate lighting.
Fit to many IFA-vehicles.
  • made EU
  • diameter glas: 135 mm
  • diameter base body: 143mm
  • highness: 75 mm
  • scope of delivery without bulbs
34,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6493

Rubber lining made in Germany for brake and clutch pedal-shaft

21,89 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7205

Three chamber rearlight, round (new type)

New type of round model of the 3 chamber rearlight.
Replacement part for genuine part which undeliverable (NOT exactly the same dimensions!).
Complete component with carrier for bulbs.
Structre: top 21W stop light, below 5W rear light, midle 21W flashing light.
Fit to many IFA-vehicles.
  • made in Austria
  • outer diameter: 140 mm
  • highness: 89 mm
  • scope of delivery: without bulbs
19,95 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7184

Rubber sealing cap for front direction indicator lamp (P50/P60/B1000/Multicar)

New produced sealing cap fit to old front flasher lights of Trabant 500 and 600 (P50/60), Barkas B1000 and Multicar truck and fit to Wartburg 311,312,313 and Framo, and fit to the side lights of the camp trailer INTERCAMP.
9,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7250

Shock absorber for double overrun brakes, Intercamp

Telescopic shock absorber for wheel overrun brakes for camper called Intercamp.
  • Type: A1-70-65/15
  • scope of delivery inclusive bushing
  • mounting eye on both ends (inner diameter: 10mm)
  • short length: 186 mm (between center of mounting eyes)
  • extended length: 262 mm (between center of mounting eyes)
  • made in Germany
  • 2 pieces will be needed
83,61 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7970

Shock absorber overrun brakes, Intercamp

Telescopic shock absorber for wheel overrun brakes for camper called Intercamp.
For types with singe shock aborber for overrun brake.
  • Type: A1-70-150/15
  • scope of delivery inclusive bushing
  • mounting eye on both ends (inner diameter: 10mm)
  • short length: 186 mm (between center of mounting eyes)
  • extended length: 262 mm (between center of mounting eyes)
  • made in Germany
  • one pieces will be needed
83,61 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8276

Gaiter for accumulating mechanisms trailer and camper

Rubber boot for the drawbar of the trailers and campers made in GDR.
The bellow protect the mechanic of the accumulating mechanisms against dust and spash water.
  • diameter of the hole 1: 60mm
  • length of the clamp mounting place next to hole 1: 35mm
  • diameter of the hole 1: 70mm
  • length of the clamp mounting place next to hole 1: 20mm
  • length total: 170mm
  • made in Germany
  • one piece will be needed
15,78 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7363

Lamp for number plate semicircular right/left

Beautyful lamp for number plate lighting from right or left side of number plate
Fit to all closed body variants of Barkas B1000 (bus, transporter, ambulance) and many campers and trailers
  • scope of delivery without bulbs 5W
  • hole distance for mounting: 72 mm (not 75 mm
  • two pieces will be needed for each vehicle
11,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7364

Lamp for number plate right/left

New lamp for number plate lighting from right or left side of number plate
Fit to all closed body variants of Barkas B1000 (bus, transporter, ambulance) and many campers and trailers
  • scope of delivery without bulbs (10W Ba15s)
  • hole distance for mounting: 72 mm (not 75 mm9
  • two pieces will be needed for each vehicle
15,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7346

Side light angular

Front side light with plastic case.
Mounting can be easily by two screws holes diameter: 5mm.
Hole distance: 30mm.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Good alternative for IFA vehicles, trailers and campers.
  • high quality
  • size bas plate: 62 x 62mm
  • size: 42 mm
  • lense: clear (withe light)
9,08 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7367

Side light round, metal housing

Front side light with firm metal case.
Mounting can be easily by the center bolt M6.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Good alternative for IFA vehicles, trailers and campers.
  • high quality
  • diameter: 67mm
  • size: 57 mm
  • lense: clear (withe light)
12,15 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7365

Side light round

Front side light with plastic case.
Mounting can be easily by two screws holes diameter: 5mm.
Hole distance: 46mm.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Good alternative for IFA vehicles, trailers and campers.
  • high quality
  • diameter: 80mm
  • size: 41 mm
  • lense: clear (withe light)
11,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7366

Side light round, original design

Front side light as good reproduction of the original lights.
Mounting can be easily by two bolts M5 like the original one.
Hole distance: 58mm.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Best replacment for the original one.
Fit to many IFA vehicles, trailers and campers.
  • made in EU
  • diameter: 81mm
  • size: 41 mm
  • lense: clear (withe light)
9,19 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7868

wheel bolt 40mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 40mm consist the length of thread and the length of knurling.
  • legth: 40mm
  • thread: M12 x 1,5
  • thread length: 28mm
  • knurling diameter: 14,5mm
  • knurling length: 7,6mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
4,98 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7200

wheel bolt 50mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 50mm consist the length of thread and the length of knurling.
  • legth: 50mm
  • thread: M12 x 1,5
  • thread length: 38mm
  • knurling diameter: 14,5mm
  • knurling length: 7,6mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
4,86 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6450

wheel bolt 60mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 60mm consist the length of thread and the length of knurling.
  • legth: 60mm
  • thread: M12 x 1,5
  • thread length: 48mm
  • knurling diameter: 14,5mm
  • knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,62 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7201

wheel bolt 80mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 80mm consist the length of thread and the length of knurling.
  • legth: 80mm
  • thread: M12 x 1,5
  • thread length: 68mm
  • knurling diameter: 14,5mm
  • knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7203

Universal boot kit

Bellows for many exertions at automobiles, trailers, caravans and ships ...
size:
  • length:19cm diameter:10mm / 30mm
  • length:23cm diameter: 35mm / 35mm
  • length:15cm diameter:30mm / 42mm
  • length:13cm diameter:41mm / 48mm
  • length:12cm diameter:41mm / 55mm
  • different length and diameter combinable
  • length of the bellow pice: 95mm
17,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7010

Pressure spring spline end for brake shoes

Spring for the automatic adjuster of the break shoes at the brake base plate.
This spring press the look plate that the sliding element can work only in one direction.
fit to follow brake systems:
  • 4 pieces for brake drum front axle Wartburg 353
  • 4 pieces for brake drum rear axle W353 and 1.3
  • 2 pieces for trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9)
  • delivery as an single part
  • made in Germany

additional needed tools for deassembly / assembly:
  • no special tools will be needed
2,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8260

Holder for brake shoe, complete set

Retainer kit for break shoes to fix the 30mm and 50mm brake shoes at the brake base plate.
fit to follow brake systems:
  • 4 set for brake drum front axle Wartburg 353
  • 4 set for brake drum rear axle W353 and 1.3
  • 2 sets for trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9)
12,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8316

Brake shoe set 50mm, long lining

One set of brake shoes complete, with long lining, inclusive four pieces.
wide: 50mm
for brake drums with inner diameter of 230 mm.
Fit for trailers and caravans Bastei, Intercamp / Oase.

contents:
4x brake shoe with long brake pad
2x rivet for brake lever
One set will be needed
45,70 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8077

Carrying wheel 120mm

Carrying wheel fit to GDR trailers and campers types Bastei,Intercamp/Oase and Qek Junior + Aero.
  • scope of delivery inclusive crank, but without Clamp retainer!
  • tube diameter: 48mm
  • tube length: 32cm
  • one pieces will be needed
25,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8454

Clamp retainer 48mm

Clamp retainer for the carrying wheels with 48mm tube diameter.
Fit to GDR trailers and campers types Bastei,Intercamp/Oase and Qek Junior + Aero.
  • single part without mounting bits
  • for tube diameter: 48mm
  • one pieces will be needed
25,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8455

Disk wheel, overhauled 4J x 13 Zoll (silver)

Steel rim for Trabant 601 complete overhauled and silver varnished.
  • new or used rim
  • sandblasted
  • primed
  • silver varnished with 2-K varnish
  • pitch circle 4 x 160
  • rim wide: 4J
  • rim diameter: 13 Zoll
  • center disc wheel ET 35
95,33 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6403

Disk wheel, overhauled 4J x 13 Zoll

Steel rim for Trabant 601 complete overhauled and prime coated.
  • new or used rim
  • sandblasted
  • primed
  • pitch circle 4 x 160
  • rim wide: 4J
  • rim diameter: 13 Zoll
  • center disc wheel ET 35
69,33 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 986

Brake tube Intervcamp/ Oase 710mm

Brake line from the triple terminal to the axle right or left hand.
Made of corrosion-resistant NiCu for the camper Bastei.
The brake pipes will be delivered complete pre-installed with 2x cap nut, LDM-part.no.:6378.
  • diameter of the tube: 4,75mm
  • lenght: 710mm
  • total two pieces will be needed
  • made in Germany
15,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8621

Shock absorber for overrun brake of fold tent camper *Camptourist* (E10-201-210/55)

High-pressure pneumatic shock absorber for the overrun brake of the fold tent trailer type Camptourist (made in GDR)
  • Type: E10-201-210/55
  • scope of delivery inclusive bushing
  • inner diameter of upper mounting eye: 10 mm
  • inner diameter of upper mounting eye: 16 mm
  • Length of outer core barrel: 30 cm
  • extended length: 52,5 cm (between center of mounting eyes)
  • made in Germany
  • 1 piece will be needed
98,45 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7037
The complete offer in Intercamp / Oase

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas