This site in german: Anhänger > Camptourist / Klappfix 
You are here: > Trailer> Camptourist / Klappfix

Spare parts for the trailer of the CT - series

The complete offer in Spare parts for the trailer of the CT - series

Telescopic shock absorber for Camptourist and Klappfix

Shock absorber for the trailer axle model Alpenkreuzer with coil spring.
Marking / type: B2-112-140/ 65
scope of delivery:
  • complete inclusive bushing
  • Made in Germany
41,17 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7117

Telescopic shock absorber Alpenkreuzer

Shock absorber for the trailer axle model Alpenkreuzer with coil spring.
Marking / type: B2-112-140/45
scope of delivery:
  • complete inclusive bushing
  • Made in Germany
48,17 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7179

Telescopic shock absorber for Camptourist and Klappfix

Shock absorber for the trailer axle model Alpenkreuzer with leaf spring.
Marking / type: B2-140-65 / 30
scope of delivery:
  • complete inclusive bushing
  • Made in Germany
43,32 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6966

Shock absorber for overrun brake of fold tent camper *Camptourist* (E10-201-210/55)

High-pressure pneumatic shock absorber for the overrun brake of the fold tent trailer type Camptourist (made in GDR)
  • Type: E10-201-210/55
  • scope of delivery inclusive bushing
  • inner diameter of upper mounting eye: 10 mm
  • inner diameter of upper mounting eye: 16 mm
  • Length of outer core barrel: 30 cm
  • extended length: 52,5 cm (between center of mounting eyes)
  • made in Germany
  • 1 piece will be needed
63,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7037

shaft seal 35 x 62 x 7

shaft seal 35 x 62 x 7
simple version without dust lip

for ball bearings (wheel bearing) of camptourist/Klappfix trailer and Qek campers only with mechanical overrun brake
Not fit to these trailer/camper if hydraulical brake system built in
5,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6395

shaft seal 35 x 62 x 7 with dust lip

shaft seal 35 x 62 x 7 with additional dust lip

for ball bearings (wheel bearing) of camptourist/Klappfix trailer and Qek campers only with mechanical overrun brake
Not fit to these trailer/camper if hydraulical brake system built in

protects the sealing lips better from brake dust
6,52 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6396

shaft seal 40 x 62 x 10 with dust lip

shaft seal 40 x 62 x 10 with additional dust lip

for ball bearings (wheel bearing) of camptourist/Klappfix trailer and Qek campers only with hydraulical overrun brake
Not fit to these trailer/camper if mechanical brake system is built in.

protects the sealing lips better from brake dust
9,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6978

Disk wheel, overhauled 4J x 13 Zoll (silver)

Steel rim for Trabant 601 complete overhauled and silver varnished.
  • new or used rim
  • sandblasted
  • primed
  • silver varnished with 2-K varnish
  • pitch circle 4 x 160
  • rim wide: 4J
  • rim diameter: 13 Zoll
  • center disc wheel ET 35
95,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6403

Disk wheel, overhauled 4J x 13 Zoll

Steel rim for Trabant 601 complete overhauled and prime coated.
  • new or used rim
  • sandblasted
  • primed
  • pitch circle 4 x 160
  • rim wide: 4J
  • rim diameter: 13 Zoll
  • center disc wheel ET 35
69,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 986

Rear wheel-brake cylinder

complete rear wheel brake cylinder with ring sleeves, brak-piston D=15,87mm.
Fit to Trabant 601 from 1.4.1968 onwards.
  • scope of delivery: inclusive ring sleeves, without bleeder screw
  • break piston diameter: 15,87mm
  • also used for some IFA-vehicles, Camptourist tent trailer
  • made in EU
  • two pieces will be needed

also for Camptourist tent trailer
27,59 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6040

Rear wheel-brake cylinder, 15mm, noe name

Complete rear wheel brake cylinder with ring sleeves and brak-piston D=15,87mm.
Reproducition spare part as low budget product.
Fit to Trabant 601 from 1.4.1968 onwards.
  • scope of delivery: inclusive ring sleeves, without bleeder screw
  • break piston diameter: 15,87mm
  • also used for some IFA-vehicles, Camptourist tent trailer
  • two pieces will be needed

also for Camptourist tent trailer
11,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8212

Ring sleeve, Ø 15,87 mm, rear. original

Sleeve set fit to rear brake cylinders (Art.No. 7191)
contents:
  • 2x ring sleeve
  • 2x plug (rubber guide for brake shoe)
  • set can be uesed for one brake cylinder
  • made in Germany

The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder should be changed.
9,04 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7307

Ring sleeve, Ø 15,87 mm, rear , EU ( incl. 2 pieces )

ring sleeve for rear brake cylinders (Art.No. 6040)
  • made in EU

contents:
The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder should be changed.
7,72 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 217

Rear brake hose

short brake hose with female and male thread connection
suitable for rear brake of Trabant 601 and some trailer types
  • thread: M10 x 1
  • length complete: 18 cm
  • two pieces will be needed
  • maed in Europe
7,23 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 231

Rear brake hose, ATE

Rear short brake hose with female and male thread connection. Made by the german producer ATE.
Suitable for the rear brake of Trabant 601 all models (with coil or leaf spring) and some trailer types
  • high quality, made by ATE
  • thread: M10 x 1
  • length complete: 18 cm
  • two pieces will be needed
18,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8227

Pressure web, left hand - rear wheel brake

The pressure web is fixed between the two rear wheel brake shoes to transmit the power of the mechanical handbrake to both of the brake shoes.
  • material: metal, galvaniced
  • place: rear wheel brake, left hand
  • original spare part
  • fit to Trabant 601 and Trabant 1,1
  • one piece will be needed
8,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 306

Pressure web, right hand - rear wheel brake

The pressure web is fixed between the two rear wheel brake shoes to transmit the power of the mechanical handbrake to both of the brake shoes.
  • material: metal, galvaniced
  • place: rear wheel brake, right hand
  • original spare part
  • fit to Trabant 601 and Trabant 1,1
  • one piece will be needed
8,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 307

Rivet bolt for hand-brake lever

Rivet bolt for mounting the hand brake lever at the rear brake shoe (short lining).
Fit to Tarabant 601 and Trabant 1,1 rear axle, Wartburg 311,312,353,1.3 and Anhänger wie Qek, Intercamp, Oase, Camptorist, Klappfix.
  • material: steel, galvaniced
  • one piece for each rear brake
1,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 183

Rear brake shoe set complete

The brake shoe rear set consist of an metal basic part and an lining.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining inclusive mounted lever for the hand brake cable.
Fit to Trabant 601 and Trabant 1,1.
Also fit to some trailers and campers like Qek and Camptourist / Klappfix with hydraulic brake system.
  • 2x lining length: 215 mm
  • 2x lining length: 165 mm
  • lining thickness: 4 mm
  • wide: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed for each car
36,22 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 312

Brake drum ( single part ), slotted

The brake drum fit to the front and to the rear axle of Trabant 500, 600 and 601 (all 2-stroke typs).
Also useable for QEK-camper
  • circle of wheel bolts: 4 x 160 mm
  • diameter: 200 mm
  • made in EU
  • one piecewill be needed for each wheel
39,19 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 304

Brake drum set, slotted

The brake drum kit consist of two slotted brake drums.
Fit to the front and to the rear axle of Trabant 500, 600 and 601 (all 2-stroke typs).
Also useable for QEK-camper
  • circle of wheel bolts: 4 x 160 mm
  • diameter: 200 mm
  • made in EU
  • one set will be needed for each axle
price 34,50 Euro / piece
69,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7621

Bleeder screw, rear - brake suddle front

Bleeder screw for rear wheel brake cylinder Rear wheel-brake cylinder piston = 19,05mm and Rear wheel-brake cylinder piston = 15,87mm Trabant 601, Trabant 1.1 and QEK-caravans.
The bleeder screw fit also to Brake suddle left hand and Brake suddle right hand Wartburg 353 and Wartburg 1,3.
3 pieces will be needed for each brake suddle.

thread: M8 X 1,25
2,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 214

Bleeder screw cap

fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.
  • material: rubber
  • made in Germany
0,35 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 215

Upper release spring ( long )

spring for brake shoes front and rear axle
  • length: 132 mm
  • diameter: 10 mm
  • galvaniced
  • made in EU
  • 2 pieces for each front wheel brake side
  • 1 piece for each rear wheel brake side
2,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 314

Lower release spring ( short )

spring for brake shoes front and rear axle
  • length: 67 mm
  • diameter: 10 mm
  • made in EU
  • 1 piece will be needed for each rear wheel brake side
2,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 313

Brake hose retainer

sacer spring for connection between flexible brake hose and brake pipe
not the same design like the originale one (made for VW). This retainer can be also used for Trabant and Wartburg.
  • electrogalvanized, black
  • high quality made in Germany, spring metal
  • one piece for each screw joint will be needed
0,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6624

Brake hose retainer, original style

sacer spring for connection between flexible brake hose and brake pipe
  • surface bronzing
  • one piece for each screw joint will be needed
1,43 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 240

Spring rubber pad, complete for rear axle (leaf spring)

Fit to rear axle of Trabant 500, 600 and 601 with vintage up to 1987 with leaf spring

Also fit to Qek camper und folded tent trailer Klappfix / camptourist
12,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 997

Gaiter for accumulating mechanisms trailer and camper

Rubber boot for the drawbar of the trailers and campers made in GDR.
The bellow protect the mechanic of the accumulating mechanisms against dust and spash water.
  • diameter of the hole 1: 60mm
  • length of the clamp mounting place next to hole 1: 35mm
  • diameter of the hole 1: 70mm
  • length of the clamp mounting place next to hole 1: 20mm
  • length total: 170mm
  • made in Germany
  • one piece will be needed
7,08 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7363

Lamp for number plate right/left

New lamp for number plate lighting from right or left side of number plate
Fit to all closed body variants of Barkas B1000 (bus, transporter, ambulance) and many campers and trailers
  • scope of delivery without bulbs (10W Ba15s)
  • hole distance for mounting: 72 mm (not 75 mm9
  • two pieces will be needed for each vehicle
9,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7346

Lamp for number plate semicircular right/left

Beautyful lamp for number plate lighting from right or left side of number plate
Fit to all closed body variants of Barkas B1000 (bus, transporter, ambulance) and many campers and trailers
  • scope of delivery without bulbs 5W
  • hole distance for mounting: 72 mm (not 75 mm
  • two pieces will be needed for each vehicle
11,44 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7364

Side light round, metal housing

Front side light with firm metal case.
Mounting can be easily by the center bolt M6.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Good alternative for IFA vehicles, trailers and campers.
  • high quality
  • diameter: 67mm
  • size: 57 mm
  • lense: clear (withe light)
12,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7365

Side light round

Front side light with plastic case.
Mounting can be easily by two screws holes diameter: 5mm.
Hole distance: 46mm.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Good alternative for IFA vehicles, trailers and campers.
  • high quality
  • diameter: 80mm
  • size: 41 mm
  • lense: clear (withe light)
7,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7366

Side light round, original design

Front side light as good reproduction of the original lights.
Mounting can be easily by two bolts M5 like the original one.
Hole distance: 58mm.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Best replacment for the original one.
Fit to many IFA vehicles, trailers and campers.
  • made in EU
  • diameter: 81mm
  • size: 41 mm
  • lense: clear (withe light)
9,19 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7868

Side light angular

Front side light with plastic case.
Mounting can be easily by two screws holes diameter: 5mm.
Hole distance: 30mm.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Good alternative for IFA vehicles, trailers and campers.
  • high quality
  • size bas plate: 62 x 62mm
  • size: 42 mm
  • lense: clear (withe light)
9,08 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7367

wheel bolt 40mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 40mm consist the length of thread and the length of knurling.
  • legth: 40mm
  • thread: M12 x 1,5
  • thread length: 28mm
  • knurling diameter: 14,5mm
  • knurling length: 7,6mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
4,19 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7200

wheel bolt 50mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 50mm consist the length of thread and the length of knurling.
  • legth: 50mm
  • thread: M12 x 1,5
  • thread length: 38mm
  • knurling diameter: 14,5mm
  • knurling length: 7,6mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
4,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6450

wheel bolt 60mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 60mm consist the length of thread and the length of knurling.
  • legth: 60mm
  • thread: M12 x 1,5
  • thread length: 48mm
  • knurling diameter: 14,5mm
  • knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7201

wheel bolt 80mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 80mm consist the length of thread and the length of knurling.
  • legth: 80mm
  • thread: M12 x 1,5
  • thread length: 68mm
  • knurling diameter: 14,5mm
  • knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7203

Universal boot kit

Bellows for many exertions at automobiles, trailers, caravans and ships ...
size:
  • length:19cm diameter:10mm / 30mm
  • length:23cm diameter: 35mm / 35mm
  • length:15cm diameter:30mm / 42mm
  • length:13cm diameter:41mm / 48mm
  • length:12cm diameter:41mm / 55mm
  • different length and diameter combinable
  • length of the bellow pice: 95mm
Special offer normaly 14,99 € now 9,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7010

Rear brake shoe set ATE

The brake shoe rear set consist of an metal basic part and an lining.
This kit is made by ATE.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining and 2x rivet.
Lever for the hand brake cable are NOT included. It have to be installed you old ones.
Fit to Trabant 601 and Trabant 1,1.
Also fit to some trailers and campers like Qek and Camptourist / Klappfix with hydraulic brake system.
  • 2x lining length: 215 mm
  • 2x lining length: 165 mm
  • lining thickness: 4 mm
  • wide: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed for each car
45,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8306

Rear brake shoe set (no name)

Low budget brake shoe kit consist of an metal basic part and an lining.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining, 2x rivet for mounting lever for the hand brake cable.
Fit to Trabant 601 and Trabant 1,1.
Also fit to some trailers and campers like Qek and Camptourist / Klappfix with hydraulic brake system.
  • 2x lining length: 215 mm
  • 2x lining length: 165 mm
  • lining thickness: 4 mm
  • wide: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed for each car
20,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8353

Brake shoe long, single part, overhauled

Complete in Germany reclaimed brake shoe set for the rear brake.
Brake shoe complete with lining, fit to the Trabant 601 models Limousine, station wagon and Kübel, Qeck, Camptourist / Klappfix.
  • use for the rear brake system of Trabant 601
  • scope of delivery: one kit
  • lining length: 2x 210mm and 2x 160mm mm
  • lining thickness: 4 mm
  • width: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed
  • delivery only in exchange after you send original IFA brake shoes to our company in advance
Exchenge part: You have to ship one set of original brake shoes to our company in advance !
74,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8403
The complete offer in Spare parts for the trailer of the CT - series

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2018 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas