Bastei-camper

The complete offer in Bastei-camper

Brake shoe complete, with lining 50mm, single part Detail brake shoe complete, with lining wide: 50mm for brake drums with inner diameter of 230 mm. fit to Wartburg 353 with brake drum at the front axle, to old version of rear axle and trailer with brake shoe wide of 50mm for one wheel side 2 pieces will be needed
32,50 €inclusive VAT, plus shipping costs temporary not available Art.No. 3073

Brake shoe set, rear axle, 50mm

Detail

One set of brake shoes complete, 4x long lining.
wide: 50mm
for brake drums with inner diameter of 230 mm.
Fit for trailers and caravans Bastei, Intercamp / Oase.
contents:

4 brake shoe with long brake pad
2x rivet for brake lever
One set will be needed

45,70 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6977

Spring set brake shoe Detail Complete spring kit fit to camper Bastei and Intercamp / Oase wide: 50 mm contents: 2x release spring short 2x release spring long
13,71 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7740

Weel-brake cylinder,

Detail

Wheel brake cylinder with piston-diameter: 25,35 mm for the hydraulic wheel brake system of the DDR camper typ: Bastei.

one piece will be needed for each wheel side

47,01 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6729

Wheel brake cylinder, rear axle, original, D=25,35mm

Detail

Complete in Germany overhauled rear wheel brake cylinder with ring sleeves, brak-piston D=25,35mm.
Mark: IFA BHL

fit to brake shoes with the wide of 50mm
scope of delivery: inclusive ring sleeves, dust caps and bleeder screw)(break piston diameter: 25,35 mm
two pieces will be needed

For more informations to this exchange part please use the Detail button.

Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.

76,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7316

Sleeve set, for wheel brake cylinder, Germany

Detail

Original ring sleeve set for rear wheel brake cylinder type: CZ5.
Fit to the camper Intercamp and Bastei.

fit to brake cylinder diameter 25,35mm
Comlete set for one wheel brake cylinder: 2x cap sleeve, 2x dust cap
all rubber seals ar made in Germany
material: break fluid resistant rubber
One set will be needed for each wheel side rear

18,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8051

Ring sleeve, for wheel brake cylinder, complete

Detail

Ring sleeve, for wheel brake cylinder.
Fit to camper Bastei and Intercamp/Oase
Comlete set for one wheel brake cylinder (incl. 2 pieces)

fit to brake cylinder diameter 25,35mm
One set will be needed for each wheel side

9,83 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6943

brake hose for trailer/camper Detail brake hose for camper Bastei and Camper maybe also fit to other types of trailer/ camper (for technical specifications see below) length ca. 50 cm type of thread: M10x1 1x female thread 1x male thread
14,90 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 1103

Handbrake cable, Bastei

Detail

handbrake cable for for the camper Bastei.
Both cables are symmetric and have the same length

the complete lenght is 160 cm
2 pieces will be needed

32,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7427

Brake line for camper Bastei form the master brake cylider to the T-junction.
Made of corrosion-resistant NiCU.
The brake pipe can be easy bent by hand, no special tools needed.
Complete pre mounted inclusive two Screw-caps.

diameter: 4,75mm
lenght: 143 cm
made in Germany

25,10 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7417

Brake tube 600mm

Detail

Brake line from the triple terminal to the axle right or left hand.
Made of corrosion-resistant NiCu for the camper Bastei.
The brake pipes will be delivered complete pre-installed with 2x cap nut, LDM-part.no.:6378.

diameter of the tube: 4,75mm
lenght: 600mm
total two pieces will be needed
made in Germany

14,88 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6942

outer wheel bearing (Bastei/Intercamp/Oase)

Detail

Inner tapered roller bearing for wheel bearing of camper Bastei and Camper Intercamp/ Oase

For one wheel you will need one piece of that bearing (two pieces for hole axle)

14,17 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6989

outer wheel bearing (Bastei/Intercamp/Oase)

Detail

Outer tapered roller bearing for wheel bearing of camper Bastei and Camper Intercamp/ Oase

12,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6988

Shock absorber for overrun brake of Bastei (A1-70-150/15)

Detail

Telescopic shock absorber for the overrun brake of the camper type Bastei (made in GDR)

Type: A1-70-150/15
scope of delivery inclusive bushing
mounting eye on both ends (inner diameter: 10mm)
short length: 186 mm (between center of mounting eyes)
extended length: 262 mm (between center of mounting eyes)
made in Germany
1 piece will be needed

83,61 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7034

Telescopic shock absorber

Detail

Shock absorber VK350 + 351for the camper types Bastei,Intercamp/Oase and Qek Junior + Aero (made in GDR).
Buffer Type: A2-150-160/50

scope of delivery inclusive bushing
mounting eye on both ends
brand manufacturer
2 pieces will be needed

117,11 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6944

Master brake cylinder - one circle, original

Detail

Installed in braked version of camper with hydraulical brake system (QEK Junior/Aero, Bastei, Intercamp/Oase)

overhauled spare part
exchange spare part
delivery without reservior for brake fluid and mounting equipment
one piece will be needed
Please note, we can only exchange you this spare part if you ship 1x used master brake cylinder with the type number TGL BH7 to our company in advance!
to use this master break cylinder one reservoir for brake fluid will be needed

Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.

76,35 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7190

Master brake cylinder - one circle, complete

Detail

Used in braked version of camper with hydraulical brake system (QEK Junior/Aero, Bastei, Intercamp/Oase)

new produced, made in EU
one piece will be needed
delivery inclusive reservoir for brake fluid

68,00 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6945

Sleeve set single brake master cylinder, original, trailer

Detail

Complete repair set for the 1-circle brake master cylinder.
The sleeves was mounted up to vinatge april 1980 at Trabant 601.

material: rubber
made in Germany
one set will be needed

14,25 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7285

Tank for brake fluid 1 circle

Detail

Reservoir for brake fluid for Trabant 601 with single-circle brake master cylinder, up to vintage: april 1980 and many trailer and camper with hydraulical brake system

scope of delivery: inclusive cap
one piece will be needed

17,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 191

Protection bellows for pressure bar input brake master cylinder

Detail

4,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6947

Clip for protection bellows

Detail

Snap ring for mounting the protection bellows, LDM-part.no.: 6974 at the brake master cylinder, LDM-part.no.: 6945 or brake master cylinder, LDM-part.no.: 7190 to seal the push rod.

delivery as single part
material: spring wire
one piece will be needed

1,70 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8066

Sleeve set single brake master cylinder, trailers

Detail

Complete repair set for the original 1-circle brake master cylinder (not fit to our new manufactured master breake cylinder).

material: rubber
made in EU
one set will be needed

10,45 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6946

Gaiter for accumulating mechanisms trailer and camper

Detail

Rubber boot for the drawbar of the trailers and campers made in GDR.
The bellow protect the mechanic of the accumulating mechanisms against dust and spash water.

diameter of the hole 1: 60mm
length of the clamp mounting place next to hole 1: 35mm
diameter of the hole 1: 70mm
length of the clamp mounting place next to hole 1: 20mm
length total: 170mm
made in Germany
one piece will be needed

15,78 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7363

Lamp for number plate semicircular right/left

Detail

Beautyful lamp for number plate lighting from right or left side of number plate
Fit to all closed body variants of Barkas B1000 (bus, transporter, ambulance) and many campers and trailers

scope of delivery without bulbs 5W
hole distance for mounting: 72 mm (not 75 mm
two pieces will be needed for each vehicle

11,87 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7364

Lamp for number plate right/left

Detail

New lamp for number plate lighting from right or left side of number plate
Fit to all closed body variants of Barkas B1000 (bus, transporter, ambulance) and many campers and trailers

scope of delivery without bulbs (10W Ba15s)
hole distance for mounting: 72 mm (not 75 mm9
two pieces will be needed for each vehicle

23,88 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7346

Side light round, metal housing

Detail

Front side light with firm metal case.
Mounting can be easily by the center bolt M6.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Good alternative for IFA vehicles, trailers and campers.

high quality
diameter: 67mm
size: 57 mm
lense: clear (withe light)

12,15 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7365

Side light round, original design

Detail

Front side light as good reproduction of the original lights.
Mounting can be easily by two bolts M5 like the original one.
Hole distance: 58mm.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Best replacment for the original one.
Fit to many IFA vehicles, trailers and campers.

made in EU
diameter: 81mm
size: 41 mm
lense: clear (withe light)

9,19 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7868

Side light round

Detail

Front side light with plastic case.
Mounting can be easily by two screws holes diameter: 5mm.
Hole distance: 46mm.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Good alternative for IFA vehicles, trailers and campers.

high quality
diameter: 80mm
size: 41 mm
lense: clear (withe light)

11,40 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7366

Side light angular

Detail

Front side light with plastic case.
Mounting can be easily by two screws holes diameter: 5mm.
Hole distance: 30mm.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Good alternative for IFA vehicles, trailers and campers.

high quality
size bas plate: 62 x 62mm
size: 42 mm
lense: clear (withe light)

9,08 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7367

wheel bolt 40mm

Detail

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 40mm consist the length of thread and the length of knurling.

legth: 40mm
thread: M12 x 1,5
thread length: 28mm
knurling diameter: 14,5mm
knurling length: 7,6mm

Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.

4,98 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7200

wheel bolt 50mm

Detail

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 50mm consist the length of thread and the length of knurling.

legth: 50mm
thread: M12 x 1,5
thread length: 38mm
knurling diameter: 14,5mm
knurling length: 7,6mm

Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.

4,86 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6450

wheel bolt 60mm

Detail

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 60mm consist the length of thread and the length of knurling.

legth: 60mm
thread: M12 x 1,5
thread length: 48mm
knurling diameter: 14,5mm
knurling length: 7,5mm

Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.

5,62 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7201

wheel bolt 80mm

Detail

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 80mm consist the length of thread and the length of knurling.

legth: 80mm
thread: M12 x 1,5
thread length: 68mm
knurling diameter: 14,5mm
knurling length: 7,5mm

Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.

5,89 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7203

Universal boot kit

Detail

Bellows for many exertions at automobiles, trailers, caravans and ships ...
size:

length:19cm diameter:10mm / 30mm
length:23cm diameter: 35mm / 35mm
length:15cm diameter:30mm / 42mm
length:13cm diameter:41mm / 48mm
length:12cm diameter:41mm / 55mm
different length and diameter combinable
length of the bellow pice: 95mm

17,28 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7010

Pressure spring spline end for brake shoes

Detail

Spring for the automatic adjuster of the break shoes at the brake base plate.
This spring press the look plate that the sliding element can work only in one direction.
fit to follow brake systems:

4 pieces for brake drum front axle Wartburg 353
4 pieces for brake drum rear axle W353 and 1.3
2 pieces for trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9)
delivery as an single part
made in Germany

additional needed tools for deassembly / assembly:

no special tools will be needed

2,30 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8260

Pressure spring for brake shoes

Detail

Spring to fix the break shoes at the brake base plate.
fit to follow brake systems:

4 pieces for brake drum front axle Wartburg 353
4 pieces for brake drum rear axle W353 and 1.3
4 pieces for brake drum front axle B1000 and B1000-1
4 pieces for brake drum rear axle B1000, B1000-1
2 pieces for trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9)
delivery as an single part
made in Germany

2,83 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8195

Holder for brake shoe, complete set

Detail

Retainer kit for break shoes to fix the 30mm and 50mm brake shoes at the brake base plate.
fit to follow brake systems:

4 set for brake drum front axle Wartburg 353
4 set for brake drum rear axle W353 and 1.3
2 sets for trailer with brake shoe wide of 50mm (e.g. Bastei, Intercamp, Camptourist CT9)

12,88 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8316