This site in german: Anhänger 
You are here: > Trailer

Trailer

Category Trailer has the following subcategorys:

The complete offer in Trailer

tarpaulin for trailer HP 3xx/ HP4xx

tarpaulin for trailer HP 300 and HP 400 with wooden side walls
  • length x wide: 140cm x 105cm
  • many different colours available
  • for other trailer with same dimendions, too
  • also for other trailer types (HP300, HP400) and forms of tarpaulin (e.g. tent roof form) possible (we need a drawing or design) Please ask for that!
  • made of high-grade truck tarpaulin
  • have the distinction of glossier surface of tarpaulin through additional finish and with a better self-cleaning effect
Please choose the dimensions of your trailer:
Options:
If you want to tell us something:
118,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1315

flat tarpaulin for trailer HP 500

tarpaulin for trailer HP 500 with sheet metall side walls
  • length x wide: 170cm x 110cm
  • many different colours available
  • for other trailer with same dimendions, too
  • also for other trailer types and forms of tarpaulin (e.g. tent roof form) possible (we need a drawing or design) Please ask for that!
  • made of high-grade truck tarpaulin
  • have the distinction of glossier surface of tarpaulin through additional finish and with a better self-cleaning effect
If you want to tell us something:
134,66 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6732

tent roof tarpaulin for trailer HP 500

tarpaulin with tent roof form
fit to trailer HP 500 with sheet metall side walls
  • length x wide: 170cm x 110cm
  • many different colours available
  • for other trailer with same dimendions, too
  • also for other trailer types possible (we need a drawing or design) Please ask for that!
  • made of high-grade truck tarpaulin
  • have the distinction of glossier surface of tarpaulin through additional finish and with a better self-cleaning effect
For additional datails:
187,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6733
Retainer for shirr and mounting aquipment for all kind of trailers

blind rivet for toggle retainer for shirr

Rivet for the mouning of the toggle holder for shirr of trailer tarpaulin
For use on trailers with sheet metal side walls.
  • material: aluminium rivet
  • diameter: 6 mm
  • length: 20 mm
  • for each retainer one piece will be needed
0,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7370

Screw for toggle retainer for shirr

Screw for the mouning of the toggle holder for shirr of trailer tarpaulin
For use on trailers with sheet metal side walls.
  • material: stainless steel
  • type: tapping screw
  • thread: use for timber
  • for each retainer one piece will be needed
0,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7371

toggle retainer for shirr

toggle holder for shirr of trailer tarpaulin
(can be mounted with a fitting screw on side walls of trailer (for instance wooden side walls of trailer type HP 300 and HP 400)
On top of the toggle is a blind hole to countersunk the screw head a little bit.
  • material: black plastic
  • diameter of mounting hole: 6 mm
  • high of toggle: 13,5 mm
  • diameter of the plane side (lying on the side wall): 25 mm
  • diameter of groove: 12 mm
  • diameter of collar (disabled the shirr to slip down): 20 mm
  • inner-diamter of countersunk: 12,7 mm
  • depth of countersunk: 2,5 mm
0,65 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6571

sheet-metal eyelet for elastic band

sheet-metal eyelet to connect two ends of elastic band
  • length: 8 mm
  • inner diameter (oval): 8 x 13 mm
  • with electrogalvanized survace
  • one piece
0,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6794

Snap hook

metal hook for the universal useing.
  • with electrogalvanized survace
  • length: 55mm
1,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7337

Tube end piece for elastic band D=6mm

Metal tube with eye to mount elastic band with snap hooks
  • length: 58 mm
  • bore diameter (7,5 mm
  • with electrogalvanized survace
1,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7335

Tube end piece for elastic band D=8mm

Metal tube with eye to mount elastic band with snap hooks
  • length: 70 mm
  • bore diameter (9 mm
  • with electrogalvanized survace
1,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7334

Tube end piece for elastic band D=10mm

Metal tube with eye to mount elastic band with snap hooks
  • length: 73 mm
  • bore diameter (11 mm
  • with electrogalvanized survace
1,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7336

elastic band (yard goods) D=8mm

elastic band
  • length: 1 m
  • diameter: circa 8 mm
  • colour: black
1,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6763

W50 hook for elastic band

special hook to use together with elastic string
  • fit to many trucks and trailers (W50/L60, ROBUR, Barkas B1000 and many more)
  • made of galvanised sheet metal
  • with two mounting holes (diameter: 5mm / well spacing: 34mm
1,91 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7317

large hook for elastic band

large hook to use together with elastic string
  • fit to many trucks and trailers (W50/L60, ROBUR, Barkas B1000 and many more)
  • made of galvanised sheet metal (thickness = 3mm)
  • with two mounting holes (diameter = 6,4 mm / well spacing = 45 mm)
  • wide total: 65 mm
  • hook wide: 16 mm
1,67 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7318

slim hook for elastic band

small hook to use together with elastic string
  • fit to many trucks and trailers/camper
  • made of galvanised sheet metal (thickness = 2,5 mm)
  • with two mounting holes (diameter = 5,2 mm / well spacing = 20 mm)
  • wide total = hook wide: 13 mm
  • high total: 53 mm
1,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7319

Tyre 4.00-8 for trailer wheel (HP3xx/HP4xx)

Tyre for the small 8″-rims of trailer typs HP300, HP350, HP400 and HP450
High quality made by ther german producer Heidenau.
  • wheel size: 8 Zoll
  • made by Heidenau, Germany
Special offer normaly 49,50 € now 37,12 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7246

Tube for wheel (trailer HP3xx/HP4xx)

Tube for small 8″-rims of trailer typs HP300, HP350, HP400 and HP450
  • made in Germany
12,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7245

Wheel bearings for trailers

Wheel bearing 6204 C2

Wheel bearing for DDR trailers type HP300.
One row grooved ball bearing 6204 C2.
  • Outside diameter: 47mm
  • Inside diameter: 20mm
  • wide: 14mm
  • typ: without cover
  • DIN 625
  • bearing clearance: C2
  • made in Germany
12,38 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7941

Wheel bearing 6205 C2

Wheel bearing for DDR trailers typs: HP350 and HP400 / 450.
One row grooved ball bearing 6205 C2.
  • Outside diameter: 52mm
  • Inside diameter: 25mm
  • wide: 15mm
  • typ: without cover
  • DIN 625
  • bearing clearance: C2
  • made in Germany
11,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7942

Wheel bearing 6304 C2

Wheel bearing for DDR trailers typs: HP350 and HP400 / 450.
One row grooved ball bearing 6304 C2.
  • Outside diameter: 52mm
  • Inside diameter: 20mm
  • wide: 15mm
  • typ: without cover
  • DIN 625
  • bearing clearance: C2
  • made in Germany
15,71 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7944

Wheel bearing 6206 C2

Wheel bearing for DDR trailers with Trabant rear axle or self made trailers.
One row grooved ball bearing 6206 C2.
  • Outside diameter: 62mm
  • Inside diameter: 30mm
  • wide: 16mm
  • typ: without cover
  • DIN 625
  • bearing clearance: C2
  • made in Germany
9,84 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7937

Wheel bearing set for HP300-450

One set of wheel bearings and selaing rings for DDR trailers types:
HP300, HP350, HP400 und HP450.
This kit is complete for both wheel hubes.
Contents:
59,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8101

Cotterpin for wheel nut HP300-450

Pin to secure the castle nut of the axle at the DDR trailers types:
HP300, HP350, HP400 und HP450.
0,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8102

Wheel nut HP300-450

Castle nut fot mounting and fixing the wheel hub of the axle at the DDR trailers types: HP300, HP350, HP400 und HP450.
  • delivery as an single part
  • Two pieces will be needed
3,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8103

Sealing for wheel bearing trailer 48x62x8

Sealing ring for the wheel bearings DDR trailers with Trabant rear axle or self made trailers.
Metal-rubber-ring with additional dust lip.
  • Outside diameter: 62mm
  • Inside diameter: 48mm
  • wide: 8mm
  • typ: WAS
7,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7946

Sealing for wheel bearing trailer 35x47x7

Sealing ring for the wheel bearings for DDR trailers HP300 with wheel bearing type: 6204.
Metal-rubber-ring with additional dust lip.
  • Outside diameter: 47mm
  • Inside diameter: 35mm
  • wide: 7mm
  • typ: WAS
6,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7947

Sealing for wheel bearing trailer 32x52x7

Sealing ring for the wheel bearings for DDR trailers HP350 / HP400.
Metal-rubber-ring with additional dust lip.
  • Outside diameter: 52mm
  • Inside diameter: 32mm
  • wide: 7mm
  • typ: WAS
6,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7945

Mounting bolt for rubber spring HP300/400/450

Locknut for mounting the elastomer springs of the
DDR trailer typs HP300, HP350, HP400 and HP450.
Fit to the trailers with the small 8″-rims.
  • security nut
  • two pieces will be needed
1,78 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7891

Bearing bushing 14 / 27mm for axle HP300/400/450/650

Rubber-metal bushing for the axle of the DDR trailer typs HP300, HP350, HP400 and HP450 and HP650.
Fit to the trailers with the small 8″-rims.
Please check the details before order, two differnt bushings are able to fit.
  • ength inner sleeve: 53 mm
  • length outer sleeve: 50 mm
  • outer diameter: 27,2 mm
  • inner diameter: 14 mm
  • 2 pieces will be needed
8,92 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7893

Bearing bushing 16 / 32mm for axle HP300/400/450

Rubber-metal bushing for the axle of the DDR trailer typs HP300, HP350, HP400 and HP450.
Fit to the trailers with the small 8″-rims.
Please check the details before order, two differnt bushings are able to fit.
  • ength inner sleeve: 54 mm
  • length outer sleeve: 50 mm
  • outer diameter: 32,2 mm
  • inner diameter: 16,4 mm
  • 2 pieces will be needed
23,52 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7894

Rubber spring HP300/400/450, 60mm

The DDR trailer typs HP300, HP350, HP400 and HP450 has in place of coil or leaf springs two elastomer springs.
Fit to the trailers with the small 8″-rims.
  • material: rubber, black
  • size: 61x60mm
  • two pieces will be needed
15,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8080

Rubber spring HP300/400/450, 100mm

The DDR trailer typs HP300, HP350, HP400 and HP450 has in place of coil or leaf springs two elastomer springs.
Fit to the trailers with the small 8″-rims.
  • material: rubber, black
  • size: 61x100mm
  • two pieces will be needed
15,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7892

Rubber for shock wishbone

Buffer for the wishbone end position for the DDR trailer models HP300, HP400 and HP450.
This part is an brilliant German reproduction. The rubber part is at the sizes and rubbermaterial equivalent to the original part and and good replacement.
  • one pieces will be neededfor each axle (total 2 pieces)
  • made in Germany
Rubber part made of your own moulding tool, made in Germany
6,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8203

Shock absorber for overrun brake of trailer (E10-201-120/35)

High-pressure pneumatic spring for the overrun brake of the trailer type HP500, HP650 and Camper Oek Junior and Aero. (made in GDR)
  • Type: E10-201-120/35
  • scope of delivery inclusive bushing
  • inner diameter of upper mounting eye: 10 mm
  • inner diameter of upper mounting eye: 16 mm
  • Length of outer core barrel: 30 cm
  • extended length: 52,5 cm (between center of mounting eyes)
  • made in Germany
  • 1 piece will be needed
63,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7036

Shock absorber for Camper *Dübender Ei* (A1-70-150/15)

Telescopic shock absorber for wheel suspension of the small camper called *Dübener Ei* (Duebener Egg, made in GDR)
  • Type: A1-70-150/15
  • scope of delivery inclusive bushing
  • mounting eye on both ends (inner diameter: 10mm)
  • short length: 186 mm (between center of mounting eyes)
  • extended length: 262 mm (between center of mounting eyes)
  • made in Germany
  • 2 pieces will be needed
53,31 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7035

Shock absorber for trailer, torsion bar

Telescopic shock absorber for wheel suspension of the charges trailer HP 500.01/01
The older type of shock absorber was marked with A2-150-140/50. It was already changed at the producing time into the actually pull level of 160.
  • Type: A2-150-140/50
  • made in Germany
  • 2 pieces will be needed
58,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7116

Shock absorber for camper Apolda

Telescopic shock absorber for wheel suspension of the Apolda camper (made in GDR)
The older type of shock absorber was marked with A2-150-140/50. It was already changed at the producing time into the actually pull level of 160.
  • Type: A2-150-160/50
  • made in Germany
  • 2 pieces will be needed
58,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8053

Shock absorber for trailer HP500

Telescopic shock absorber for wheel suspension of the charges trailer HP 500.01/01
  • Type: A2-150-80/50
  • made in Germany
  • 2 pieces will be needed
58,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7115

Shock absorber for trailer HP650

Telescopic shock absorber for wheel suspension of the charges trailer HP 650
  • Type: B2-140-65/35
  • made in Germany
  • 2 pieces will be needed
58,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7543

Coil spring for trailer HP500, 650

Coil spring for wheel suspension of the charges trailer HP500.01 and HP650.01
  • Type: middle whorl diameter: 89mm
  • wire diameter: 11mm
  • total length: 165mm
  • ammount of whorls: 6
  • made in Germany
  • 2 pieces will be needed
48,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7669

Rubber ring coil spring

Rubber buffer for coil spring upper and under side.
Fit for the charges trailer HP500.01 and HP650.01 or Qek Campers based on HP500.01 or HP650.01
The rubber ring is mounted between spring and axle and between spring and dome.
  • material: rubber, black
  • made in Germany
  • 4 pieces will be needed
4,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8448

PVC cable 7 x 1,5 qmm (AWG16)

price for each meter
4,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6871

rubber cable 7 x 1,5 qmm (AWG16)

Solid rubber cable with seven single wires.
priece for each meter
5,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6870

7-pin connector, plastic for trailer

Plug made of plastic for self repair of the connection wire.
Fit to all trailer sockets with 7-pins.
  • With screwed terminals and cord grip
  • Housing made of black plastic (ABS)
4,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6874

7-pin connector, metal for trailer

Plug made of aluminium for self repair of the connection wire.
Fit to all trailer sockets with 7-pins.
  • With screwed terminals and cord grip
  • Housing made Aluminium
5,38 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7896

7-pin connector for trailer (incl. wiring to your selected cable)

This article contains the 7-pin connector for trailer use and the wiring to one end of selectetd cable you have to order separately (PVC-vehicle-cabel or rubber cabel).
  • delivery as plastic plug


wiring table included
Plastic plug case
16,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6873

7-pin connector for trailer (incl. wiring to your selected cable)

This article contains the 7-pin connector for trailer use and the wiring to one end of selectetd cable you have to order separately (PVC-vehicle-cabel or rubber cabel).
  • delivery as Aluminium plug


wiring table included
plug with metal case
19,01 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7897

adapter plug for trailer

To connect the trailer plug with seven contacts to socket of towing vehicle with 13 contacts
  • Mini-adapter
  • with integrated terminal assignment inside the cap (see details)
  • easy installation
11,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6756

Trailer terminal, metal case, 7-pins

Socket made of Aluminium for mounting at vehicles or trailers.
type: 7-contacts, fit to all 7-contact plugs.
  • made of solid aluiminum case
  • with integrated terminal assignment inside the cap (see details)
  • delivery inclusive rubber selaing
  • connection pins for wire with screws
9,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7895

coupling joint for trailer with square towing bar (Ø=70mm)

Coupling joint for trailers made in GDR and a square towing bar with 60mmx60mm or made of of two U-beam (like most HP300/HP350/HP400/HP450).
  • name: Rockinger KK92 F
  • mounting through two bolts M12
  • bolt distance: 54 mm
  • max. load on the coupling joint: 120 kg
  • for trailer with max. axle load of 1600 kg
  • total length: 23cm
  • made in Germany
  • 1 piece will be needed
69,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7332

coupling joint for trailer with round towing bar (Ø=60mm)

Coupling joint for trailers made in GDR and a round towing bar with 60mm diameter of towing bar.
  • name: Rockinger KK92 B
  • mounting through two bolts M12
  • bolt distance: 54 mm
  • max. load on the coupling joint: 120 kg
  • for trailer with max. axle load of 1600 kg
  • total length: 23cm
  • made in Germany
  • 1 piece will be needed
69,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7326

coupling joint for trailer with round towing bar (Ø=70mm)

Coupling joint for trailers made in GDR and a round towing bar with 70mm diameter of towing bar.
  • name: Rockinger KK92 B
  • mounting through two bolts M12
  • bolt distance: 54 mm
  • max. load on the coupling joint: 120 kg
  • for trailer with max. axle load of 1600 kg
  • total length: 23cm
  • made in Germany
  • 1 piece will be needed
69,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7331

Gaiter for accumulating mechanisms trailer and camper

Rubber boot for the drawbar of the trailers and campers made in GDR.
The bellow protect the mechanic of the accumulating mechanisms against dust and spash water.
  • diameter of the hole 1: 60mm
  • length of the clamp mounting place next to hole 1: 35mm
  • diameter of the hole 1: 70mm
  • length of the clamp mounting place next to hole 1: 20mm
  • length total: 170mm
  • made in Germany
  • one piece will be needed
8,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7363

Cap for trailer hitch, black

Protection cap for ball of trailer hitch (towbar) of car
  • fit to ball diameter of 50 mm
  • protection cap made from black plastic
  • Overall height: 67 mm
2,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7329

Cap for trailer hitch, chromed

Protection cap for ball of trailer hitch (towbar) of car
  • fit to ball diameter of 50 mm
  • protection cap made from plastic with chromium plated surface
  • Overall height: 67 mm
7,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6872

Cap for trailer hitch, chromed metall

Protection cap for ball of trailer hitch (towbar) of car
  • fit to ball diameter of 50 mm
  • protection cap made from chromium plated metall
  • with plastic clamping
  • Overall height: 80 mm
8,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7330

Triangular reflector red/ black

1,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6868

Triangular reflector red

2,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6869

Lamp for number plate right/left

New lamp for number plate lighting from right or left side of number plate
Fit to all closed body variants of Barkas B1000 (bus, transporter, ambulance) and many campers and trailers
  • scope of delivery without bulbs (10W Ba15s)
  • hole distance for mounting: 72 mm (not 75 mm9
  • two pieces will be needed for each vehicle
15,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7346

Lamp for number plate semicircular right/left

Beautyful lamp for number plate lighting from right or left side of number plate
Fit to all closed body variants of Barkas B1000 (bus, transporter, ambulance) and many campers and trailers
  • scope of delivery without bulbs 5W
  • hole distance for mounting: 72 mm (not 75 mm
  • two pieces will be needed for each vehicle
11,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7364

Retro licence plate lights

Chromed reversing registration plate light.
Mounting with two M6 nuts.
The lamp made of high end fabrication and the design fit brilliant to historical cars.
  • colour: chromium-plated casing, clear lense
  • size: L=82mm x B=29mm x H=27mm
  • bolt distance: 45mm
  • delivery without bulb
  • made in Europe
  • mit E-Zeichen
16,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7989

Three chamber rearlight, round right or left hand

Round model of the 3 chamber rearlight. Complete component with carrier for bulbs.
Structre: top 21W stop light, below 5W rear light, midle 21W flashing light.
Fit to many IFA-vehicles.
  • made in Germany
  • diameter glas: 135 mm
  • diameter base body: 143mm
  • highness: 75 mm
  • scope of delivery without bulbs
29,13 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6493

Glas for three chamber rearlight, round, without number plate light

Glas for round model of the 3 chamber rearlight.
Structre: top 21W stop light, below 5W rear light, middle 21W flashing light.
Fit to many IFA-vehicles and trailer.
  • made in Germany
  • diameter glas: 135 mm
  • highness: 55 mm
18,47 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6496

Glas for three chamber rearlight, round, with number plate light

Glas for round model of the 3 chamber rearlight.
Structre: top 21W stop light, below 5W rear light, middle 21W flashing light.
The lower part is made transparent for number plate lighting.
Fit to many IFA-vehicles and trailer.
  • made in Germany
  • diameter glas: 135 mm
  • highness: 55 mm
18,47 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6672

Rubber lining made in Germany for brake and clutch pedal-shaft

21,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7205

Three chamber rearlight, round (new type)

New type of round model of the 3 chamber rearlight.
Replacement part for genuine part which undeliverable (NOT exactly the same dimensions!).
Complete component with carrier for bulbs.
Structre: top 21W stop light, below 5W rear light, midle 21W flashing light.
Fit to many IFA-vehicles.
  • made in Austria
  • outer diameter: 140 mm
  • highness: 89 mm
  • scope of delivery: without bulbs
19,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7184

Spare glass for three chamber rearlight, round (new type)

New type of round model of the 3 chamber rearlight.
10,36 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7206

Three chamber rearlight, angularly, left hand

Angulary model of the 3 chamber rearlight for left hand mounting. Complete component with carrier for bulbs.
Structre: left 21W flashing light, middle 5W rear light, right 21W stop light.
Fit to many IFA-vehicles (for instance: Wartburg Trans, Trabant Kübel, Multicar M25) and trailes.
  • made in Germany
  • dimension: 83mm x 210 mm
  • highness: 60 mm
  • hole with rubber sealing for cable gland on lower back side left
  • scope of delivery without bulbs
15,36 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7071

Three chamber rearlight, angularly, right hand

Angulary model of the 3 chamber rearlight. Complete component with carrier for bulbs.
Structre: right 21W flashing light, middle 5W rear light, left 21W stop light.
Fit to many IFA-vehicles (for instance: Wartburg Trans, Trabant Kübel, Multicar M25) and trailes.
  • made in Germany
  • dimension: 83mm x 210 mm
  • highness: 60 mm
  • hole with rubber sealing for cable gland on lower back side left
  • scope of delivery without bulbs
15,36 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6492

Three chamber rearlight, angularly, with additional clear lense, left hand

Angulary model of the 3 chamber rearlight. Complete component with carrier for bulbs.
Structre: right 21W flashing light, middle 5W rear light, left 21W stop light.
With additional clear lense at the middle of the rearlight case (for example: numberplate lighting)
Fit to many IFA-vehicles and trailes.
  • only available for left hand
  • made in Germany
  • dimension: 83mm x 210 mm
  • highness: 60 mm
  • hole with rubber sealing for cable gland on lower back side right
  • scope of delivery without bulbs
15,72 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6504

glas for three chamber rearlight, angularly, left hand

Glas for angulary model of the 3 chamber rearlight.
Fit to leftt hand base body.
Structure: left 21W flashing light, middle 5W rear light, right 21W stop light.
Fit to many IFA-vehicles and trailes.
  • made in Germany
  • dimension: 83mm x 210 mm
  • highness: 14 mm
8,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7070

glas for three chamber rearlight, angularly, right hand

Glas for angulary model of the 3 chamber rearlight.
Fit to right hand base body.
Structure: left 21W flashing light, middle 5W rear light, right 21W stop light.
Fit to many IFA-vehicles and trailes.
  • made in Germany
  • dimension: 83mm x 210 mm
  • highness: 14 mm
8,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6494

Side light round, metal housing

Front side light with firm metal case.
Mounting can be easily by the center bolt M6.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Good alternative for IFA vehicles, trailers and campers.
  • high quality
  • diameter: 67mm
  • size: 57 mm
  • lense: clear (withe light)
12,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7365

Side light angular

Front side light with plastic case.
Mounting can be easily by two screws holes diameter: 5mm.
Hole distance: 30mm.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Good alternative for IFA vehicles, trailers and campers.
  • high quality
  • size bas plate: 62 x 62mm
  • size: 42 mm
  • lense: clear (withe light)
9,08 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7367

Side light round, original design

Front side light as good reproduction of the original lights.
Mounting can be easily by two bolts M5 like the original one.
Hole distance: 58mm.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Best replacment for the original one.
Fit to many IFA vehicles, trailers and campers.
  • made in EU
  • diameter: 81mm
  • size: 41 mm
  • lense: clear (withe light)
9,19 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7868

Side light round

Front side light with plastic case.
Mounting can be easily by two screws holes diameter: 5mm.
Hole distance: 46mm.
Bulb (tubular lamp 5W)will be needed (not included of the delivery)
Good alternative for IFA vehicles, trailers and campers.
  • high quality
  • diameter: 80mm
  • size: 41 mm
  • lense: clear (withe light)
7,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7366

Lamp spare kit H4 / 12V

Spare kit with different bulbs fit to voltage of 12V
content:
  • 1x H4-lamp 60/55W with base P43t
  • 2x spherical lamps 21W white with base Ba15s
  • 1x tubular lamp 21W (C21W) with base SV 8,5
  • 1x tubular lamp 5W (C5W) with base SV 8,5
  • 1x bulb 4W (T4W) with base BA 9s
  • 1x bulb for speedometer 2W with base BA 7s
  • 1x Torpedo-fuse 8A
  • 1x Torpedo-fuse 16A
12,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7057

Bulbs spare kit R2 / 6V

Spare kit with different bulbs fit to voltage of 12V
content:
  • 1x R2-lamp 45/40W with base P45t
  • 1x spherical lamps 18W white with base Ba15s
  • 1x tubular lamp 18W (C21W) with base SV 8,5
  • 1x tubular lamp 5W (C5W) with base SV 8,5
  • 1x bulb 4W (T4W) with base BA 9s
  • 1x bulb for speedometer 0,6W with base BA 7s
  • 1x spherical lamps 21W white with base Ba15s
  • 1x spherical lamps 5W white with base Ba15s
  • 1x Torpedo-fuse 8A
  • 1x Torpedo-fuse 16A
14,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7145

Lamp spare kit R2 / 12V

Spare kit with different bulbs fit to voltage of 12V
content:
  • 1x R2-lamp 45/40W with base P45t
  • 2x spherical lamps 21W white with base Ba15s
  • 1x tubular lamp 21W (C21W) with base SV 8,5
  • 1x tubular lamp 5W (C5W) with base SV 8,5
  • 1x bulb 4W (T4W) with base BA 9s
  • 1x bulb for speedometer 2W with base BA 7s
  • 1x Torpedo-fuse 8A
  • 1x Torpedo-fuse 16A
14,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6623

elastic band with hooks, 30 cm

elastic band with metall hook at each end
  • length: 30 cm
  • for fast fixation of blankets or tarpaulins or light load
3,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6757

elastic band with hooks, 60 cm

elastic band with metall hook at each end
  • length: 60 cm
  • for fast fixation of blankets or tarpaulins or light load
4,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6758

elastic band with hooks, 80 cm

elastic band with metall hook at each end
  • length: 80 cm
  • for fast fixation of blankets or tarpaulins or light load
4,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6759

elastic band with hooks, 100 cm

elastic band with metall hook at each end
  • length: 100 cm
  • for fast fixation of blankets or tarpaulins or light load
4,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6760

elastic band with hooks, 150 cm

elastic band with metall hook at each end
  • length: 150 cm
  • colour: black
  • for fast fixation of blankets or tarpaulins or light load
5,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6761

elastic band with hooks, 200 cm

elastic band with metall hook at each end
  • length: 200 cm (2 m)
  • colour: black
  • for fast fixation of blankets or tarpaulins or light load
5,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6762

Universal boot kit

Bellows for many exertions at automobiles, trailers, caravans and ships ...
size:
  • length:19cm diameter:10mm / 30mm
  • length:23cm diameter: 35mm / 35mm
  • length:15cm diameter:30mm / 42mm
  • length:13cm diameter:41mm / 48mm
  • length:12cm diameter:41mm / 55mm
  • different length and diameter combinable
  • length of the bellow pice: 95mm
Special offer normaly 14,99 € now 9,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7010

Rubber sleeve cushion for shock absorber 30mm

The bushing is pressed in to the eye of the shock absorber diameter size 30mm.
Fit to Trabant 500,600,601 leaf spring shocks or Wartburg 311/312/353, DDR trailers shocks and so on...
  • 1x length inner sleeve: 32 mm
  • 1x rubber
  • made in Germany
  • 2 or 4 pieces will be needed
8,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8028

Handbrake cable for trailer HP500, 650

Cable wire for the hand break system of of the charges trailer HP500.01 and HP650.01
  • total length: steel wire with eyelets: 1120mm
  • wire diameter: 3,5mm
  • length of bowden cale: 660mm
  • 2 pieces will be needed
58,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8425

Brake shoe set mechanical brake system, overhauled in Germany

The brake shoe rear set fit to trailers and campers like Qek and Camptourist / Klappfix and HP 500 with mechanical brake system.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining.
Excange part, complete overhauled in Germany.
  • 2x lining length: 215 mm
  • 2x lining length: 165 mm
  • lining thickness: 4 mm
  • wide: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed for each trailer
Overhaul part, please send one set of brake shoes in advance to our company!
139,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7959

Brake shoe set for mechanical brake system, with springs

The brake shoe rear set fit to trailers and campers like Qek and Camptourist / Klappfix and HP 500 with mechanical brake system.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining.
New production, made in EU.
This set will be delivered incklusive release springs
  • 2x lining length: 215 mm
  • 2x lining length: 165 mm
  • lining thickness: 4 mm
  • wide: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed for each trailer
new reproduction
165,53 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8148

Brake shoe set for mechanical brake system

The brake shoe rear set fit to trailers and campers like Qek and Camptourist / Klappfix and HP 500 with mechanical brake system.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining.
New production, made in EU.
  • 2x lining length: 215 mm
  • 2x lining length: 165 mm
  • lining thickness: 4 mm
  • wide: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed for each trailer
new reproduction
119,53 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8062

Safety box for parking trailers

Metal box to protect the parked trailer.
Scop of delivery inclusive padlock.
22,35 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8416

Release spring kit for mechanival brake system

This spring set fit to trailers and campers like Qek and Camptourist / Klappfix and HP 500 with mechanical brake system.
  • New production, made in EU.
  • one set will be needed for each trailer
new reproduction
38,14 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8445

Rubber ring for shock absorber for overrun brake of trailer

Ring for mounting at the high-pressure pneumatic spring for the overrun brake of the trailer type HP500, HP650 and Camper Oek Junior and Aero. (made in GDR)
Fit for spring types: E10-201-120/35 and E10-201-210/55
  • Material: rubber
  • made in Germany
  • 2 pieces will be needed
3,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8460

Brake cable for mechanival brake system, 1,44m, 560mm

Brake wire fit for trailers and campers like Qek and Camptourist / Klappfix and HP 500 with mechanical brake system.
Connection between balance arm and brake mechanic inside of the brake base plate
  • total length: about 1,44 m
  • length of the cover: 560 mm
  • New production, made in EU.
  • 2 pieces will be needed for each trailer
new reproduction
19,04 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8463

Brake cable for mechanival brake system, 1,44m, 660mm

Brake wire fit for trailers and campers like Qek and Camptourist / Klappfix and HP 500 with mechanical brake system.
Connection between balance arm and brake mechanic inside of the brake base plate
  • total length: about 1,44 m
  • length of the cover: 660 mm
  • New production, made in Germany
  • 2 pieces will be needed for each trailer
new reproduction
62,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8469

Clamp retainer 48mm

Clamp retainer for the carrying wheels with 48mm tube diameter.
Fit to GDR trailers and campers types Bastei,Intercamp/Oase and Qek Junior + Aero.
  • single part without mounting bits
  • for tube diameter: 48mm
  • one pieces will be needed
18,13 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8455

Rubber spring for end stop, M8 bolt

Universal rubber spring with bolt for end stop.
For massures please click on detail.
  • material: rubber-metal part
  • bolt threat: M8
  • Reproduction made in EU
5,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8493

Rubber spring for end stop

Universal rubber spring for end stop. Easy mounting because of groove for holes.
For massures please click on detail.
  • material: rubber-form part
  • Reproduction made in EU
5,06 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8494
The complete offer in Trailer

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2020 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas